|
Home > Archive > Voice over IP Cisco > April 2007 > dial peer for Modem call
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
dial peer for Modem call
|
|
| Voll, Scott 2007-04-27, 1:11 pm |
| I was using MGCP and converted to h323. I'm now seeing problems with an
out bound Modem calling out.
How can I setup a dail peer for the number that the modem is calling?
Thanks
Scott
| |
| Voll, Scott 2007-04-27, 7:11 pm |
| Voice Service voip
Modem passthorugh nse codec u711ulaw
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Voll, Scott
Sent: Friday, April 27, 2007 8:36 AM
To: cisco-voip@puck-nether.net
Subject: [cisco-voip] dial peer for Modem call
I was using MGCP and converted to h323. I'm now seeing problems with an
out bound Modem calling out.
How can I setup a dail peer for the number that the modem is calling?
Thanks
Scott
| |
| Turpin, Mark 2007-04-29, 1:11 pm |
| You're asking for a dial-peer so I'm wondering - can it complete the call at all?
If you can complete the call, but just want to match the call on the outbound, on your PSTN gateway use 'answer-address' on a voip peer to match the called party.
Finally, there's been some rumblings that relay is generally more successful than passthrough...
http://www.commsdesign.com/showArti...icleID=16500688
-Mark
--
Mark Turpin
Senior Consultant - Unified Communications
Calence, LLC
IP Phone: 314.656.2315
Mobile: 314.629.8714
www.calence.com
2005 cisco Global Channel Partner of the Year - US/Canada
_________________________
The information contained in this message and any attachment may contain privileged or confidential information protected from disclosure. If you are not the intended recipient, or an employee or agent responsible for delivering this message to the intend
ed recipient, you are hereby notified that any review, dissemination, distribution or copying of this information is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by replying to this message an
d destroying the original and all copies. Thank you.
________________________________
From: cisco-voip-bounces@puck.nether.net on behalf of Voll, Scott
Sent: Fri 4/27/2007 3:21 PM
To: cisco-voip@puck-nether.net
Subject: Re: [cisco-voip] dial peer for Modem call
Voice Service voip
Modem passthorugh nse codec u711ulaw
________________________________
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Voll, Scott
Sent: Friday, April 27, 2007 8:36 AM
To: cisco-voip@puck-nether.net
Subject: [cisco-voip] dial peer for Modem call
I was using MGCP and converted to h323. I'm now seeing problems with an out bound Modem calling out.
How can I setup a dail peer for the number that the modem is calling?
Thanks
Scott
| |
| Turpin, Mark 2007-04-29, 1:11 pm |
| Correction, incoming called-number, not answer address.
-Mark
--
Mark Turpin
Senior Consultant - Unified Communications
Calence, LLC
IP Phone: 314.656.2315
Mobile: 314.629.8714
www.calence.com
2005 cisco Global Channel Partner of the Year - US/Canada
_________________________
The information contained in this message and any attachment may contain privileged or confidential information protected from disclosure. If you are not the intended recipient, or an employee or agent responsible for delivering this message to the intend
ed recipient, you are hereby notified that any review, dissemination, distribution or copying of this information is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by replying to this message an
d destroying the original and all copies. Thank you.
________________________________
From: cisco-voip-bounces@puck.nether.net on behalf of Turpin, Mark
Sent: Sun 4/29/2007 9:08 AM
To: Voll, Scott; cisco-voip@puck-nether.net
Subject: Re: [cisco-voip] dial peer for Modem call
You're asking for a dial-peer so I'm wondering - can it complete the call at all?
If you can complete the call, but just want to match the call on the outbound, on your PSTN gateway use 'answer-address' on a voip peer to match the called party.
Finally, there's been some rumblings that relay is generally more successful than passthrough...
http://www.commsdesign.com/showArti...icleID=16500688
-Mark
--
Mark Turpin
Senior Consultant - Unified Communications
Calence, LLC
IP Phone: 314.656.2315
Mobile: 314.629.8714
www.calence.com
2005 cisco Global Channel Partner of the Year - US/Canada
_________________________
The information contained in this message and any attachment may contain privileged or confidential information protected from disclosure. If you are not the intended recipient, or an employee or agent responsible for delivering this message to the intend
ed recipient, you are hereby notified that any review, dissemination, distribution or copying of this information is strictly prohibited. If you have received this transmission in error, please notify the sender immediately by replying to this message an
d destroying the original and all copies. Thank you.
________________________________
From: cisco-voip-bounces@puck.nether.net on behalf of Voll, Scott
Sent: Fri 4/27/2007 3:21 PM
To: cisco-voip@puck-nether.net
Subject: Re: [cisco-voip] dial peer for Modem call
Voice Service voip
Modem passthorugh nse codec u711ulaw
________________________________
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Voll, Scott
Sent: Friday, April 27, 2007 8:36 AM
To: cisco-voip@puck-nether.net
Subject: [cisco-voip] dial peer for Modem call
I was using MGCP and converted to h323. I'm now seeing problems with an out bound Modem calling out.
How can I setup a dail peer for the number that the modem is calling?
Thanks
Scott
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|