|
Home > Archive > Voice over IP Cisco > April 2007 > ISDN to ISDN hairping on CME40
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
ISDN to ISDN hairping on CME40
|
|
| Matthias Schaerer 2007-04-28, 1:11 pm |
| hi,
i want to allow an ISDN hairpin on a PRI with no success so far. I tried
anything in terms of transfer system commands (full-blind, full-consult,
local-consult) and i have a transfer pattern of .T in the config. But
after dialing the last digit of my mobile number i always get a busy
signal.
neither the debug voice dialpeer all or the debug voice ccapi inout
command show anything while i'm dialing the digits of my mobile number, a
sniffer trace shows that the digits are sent to CME.
does anybody have an idea if the isdn to isdn hairpinning is supported
anyway and if so, what commands might be worth a try in my case?
thanks
mat
-----------------------------------------------------------------------------------
Matthias Schaerer
Network Engineer, Instructor
Mob: +41 79 419 4557
http://www.anyweb.ch - All you want to know about taking care of networks
is here.
http://www.anyweb-osys.ch - All you want to know about networking training
is here.
(Don't be afraid to ask.)
In case of trouble with resending emails to me
mailto:matthias.schaerer@anyweb.ch
| |
| Kalle Tetto 2007-04-29, 7:11 am |
| Hi,
this has solved my problem I had with CME PRI Hairpining:
http://www.cisco.com/en/US/partner/...080816cac.shtml
Cheers
Matthias Schaerer schrieb:
>
> hi,
>
> i want to allow an ISDN hairpin on a PRI with no success so far. I tried
> anything in terms of transfer system commands (full-blind, full-consult,
> local-consult) and i have a transfer pattern of .T in the config. But
> after dialing the last digit of my mobile number i always get a busy
> signal.
>
> neither the debug voice dialpeer all or the debug voice ccapi inout
> command show anything while i'm dialing the digits of my mobile number,
> a sniffer trace shows that the digits are sent to CME.
>
> does anybody have an idea if the isdn to isdn hairpinning is supported
> anyway and if so, what commands might be worth a try in my case?
>
> thanks
> mat
> -----------------------------------------------------------------------------------
> Matthias Schaerer
> Network Engineer, Instructor
> Mob: +41 79 419 4557
>
> http://www.anyweb.ch - All you want to know about taking care of
> networks is here.
> http://www.anyweb-osys.ch - All you want to know about networking
> training is here.
> (Don't be afraid to ask.)
>
> In case of trouble with resending emails to me
> mailto:matthias.schaerer@anyweb.ch
>
>
> ------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Matthias Schaerer 2007-04-29, 1:11 pm |
| Thanks Kalle,
your answer gave me the courage to think that my config should work. The
solution was not your proposed translation (I assume I have a very gentle
provider) but I stumbled across the transfer max-length command. When
setting it to the maximum (which according to cisco documentation is the
default) my transfers worked fine.
Thanks again, it's good to be in this forum. Thanks to all the other
contributors too.
Mat
-----------------------------------------------------------------------------------
Matthias Schaerer
Network Engineer, Instructor
Mob: +41 79 419 4557
http://www.anyweb.ch - All you want to know about taking care of networks
is here.
http://www.anyweb-osys.ch - All you want to know about networking training
is here.
(Don't be afraid to ask.)
In case of trouble with resending emails to me
mailto:matthias.schaerer@anyweb.ch
Kalle Tetto <tettokalle@hotmail.com>
Sent by: cisco-voip-bounces@puck.nether.net
29.04.2007 10:08
To: cisco-voip@puck.nether.net
cc:
Subject: Re: [cisco-voip] ISDN to ISDN hairping on CME40
Hi,
this has solved my problem I had with CME PRI Hairpining:
http://www.cisco.com/en/US/partner/...080816cac.shtml
Cheers
Matthias Schaerer schrieb:
>
> hi,
>
> i want to allow an ISDN hairpin on a PRI with no success so far. I tried
> anything in terms of transfer system commands (full-blind, full-consult,
> local-consult) and i have a transfer pattern of .T in the config. But
> after dialing the last digit of my mobile number i always get a busy
> signal.
>
> neither the debug voice dialpeer all or the debug voice ccapi inout
> command show anything while i'm dialing the digits of my mobile number,
> a sniffer trace shows that the digits are sent to CME.
>
> does anybody have an idea if the isdn to isdn hairpinning is supported
> anyway and if so, what commands might be worth a try in my case?
>
> thanks
> mat
>
-----------------------------------------------------------------------------------
> Matthias Schaerer
> Network Engineer, Instructor
> Mob: +41 79 419 4557
>
> http://www.anyweb.ch - All you want to know about taking care of
> networks is here.
> http://www.anyweb-osys.ch - All you want to know about networking
> training is here.
> (Don't be afraid to ask.)
>
> In case of trouble with resending emails to me
> mailto:matthias.schaerer@anyweb.ch
>
>
> ------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|