|
Home > Archive > Voice over IP Cisco > May 2007 > which ios to use for 3845
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
which ios to use for 3845
|
|
| Lelio Fulgenzi 2007-05-08, 7:11 pm |
| my 3845 was just dropped off.
what IOS are people recommending for this thing? primarily used as a voice gateway (2 T1/PRIs using MGCP) and for SRST. I don't think I will be doing much transcoding, (other than from PSTN to voip) or conferencing.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
....there's no such thing as a bad timbit...
| |
| Voll, Scott 2007-05-09, 1:12 pm |
| Personally I like to start with the newest mainline code. But I don't
know if the 3845 has a mainline code yet.
I guess the newest T train.
Scott
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, May 08, 2007 6:57 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] which ios to use for 3845
my 3845 was just dropped off.
what IOS are people recommending for this thing? primarily used as a
voice gateway (2 T1/PRIs using MGCP) and for SRST. I don't think I will
be doing much transcoding, (other than from PSTN to voip) or
conferencing.
------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
....there's no such thing as a bad timbit...
| |
| Lelio Fulgenzi 2007-05-10, 7:11 pm |
| Well, considering we've got 7911s we need SRST for, looks like it's 12.4(9)T or better for me!
Talk about bleeding edge...at least it looks like 12.4(11)T2 is LD and not ED.
Thanks for all your suggestions.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
....there's no such thing as a bad timbit...
----- Original Message -----
From: Carter, Bill
To: Lelio Fulgenzi
Sent: Tuesday, May 08, 2007 12:45 PM
Subject: RE: [cisco-voip] which ios to use for 3845
12.4(6)T7 or 12.4(7)b
http://www.cisco.com/univercd/cc/td...p.htm#wp1261437
Cisco "Golden Bridge" documents
http://www.cisco.com/univercd/cc/td...x/4_4/index.htm
------------------------------------------------------------------------------
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, May 08, 2007 8:57 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] which ios to use for 3845
my 3845 was just dropped off.
what IOS are people recommending for this thing? primarily used as a voice gateway (2 T1/PRIs using MGCP) and for SRST. I don't think I will be doing much transcoding, (other than from PSTN to voip) or conferencing.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...there's no such thing as a bad timbit...
| |
| Lelio Fulgenzi 2007-05-11, 1:11 pm |
| You really gotta like it when documentation conflicts.
And from srst 3.3 "supported firmware, platforms, etc", we get a table that says 7911g is supported.
http://www.cisco.com/en/US/customer...00805fdf87.html
>From srst 4.1 datasheet we get a table that says 7911g is not supported until 4.0
http://www.cisco.com/en/US/customer...cd805e1e79.html
"round and round she goes, where she stops, nobody knows."
Cisco Unified IP Phone Support
Cisco Unified IP Phone or cisco Endpoint
File Name of Compatible cisco Unified CallManager
Firmware for SCCP
File Name of Compatible
Cisco Unified CallManager
Firmware for SIP
Cisco ATA-186
Cisco ATA-188
ATA030100SCCP040211A.zup
-
Cisco IP Communicator 2.0*
NA
NA
Cisco Unified IP Phone 7902G
CP7902040000SCCP040701A.sbin
-
Cisco Unified IP Phone 7905G
CP7902040000SCCP040701A.sbin
-
Cisco Unified IP Phone 7910
P00403020214.bin
-
Cisco IP Phone 7911G*
cmterm-7911-sccp.7-2-1.exe
-
Table 3. cisco Unified IP Phone Support Using SCCP
Phone
Cisco Unified SRST 2.1
Cisco Unified SRST 3.3
Cisco Unified SRST 3.4
Cisco Unified SRST 4.0
Cisco Unified SRST 4.1
Cisco Unified IP Phone 7970G and 7971G-GE models
-
X
X
X
X
Cisco Unified IP Phone 7960G and 7940G models
X
X
X
X
X
Cisco Unified IP Phone 7961G, 7941G, 7961G-GE, and 7941G-GE models
-
X
X
X
X
Cisco Unified IP Conference Station 7935
X
X
X
X
X
Cisco Unified IP Conference Station 7936
-
X
X
X
X
Cisco Unified IP Phone 7912G
-
X
X
X
X
Cisco Unified IP Phone 7911G
-
-
-
X
X
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
....there's no such thing as a bad timbit...
----- Original Message -----
From: Lelio Fulgenzi
To: cisco-voip@puck.nether.net
Sent: Thursday, May 10, 2007 4:54 PM
Subject: Re: [cisco-voip] which ios to use for 3845
Well, considering we've got 7911s we need SRST for, looks like it's 12.4(9)T or better for me!
Talk about bleeding edge...at least it looks like 12.4(11)T2 is LD and not ED.
Thanks for all your suggestions.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...there's no such thing as a bad timbit...
----- Original Message -----
From: Carter, Bill
To: Lelio Fulgenzi
Sent: Tuesday, May 08, 2007 12:45 PM
Subject: RE: [cisco-voip] which ios to use for 3845
12.4(6)T7 or 12.4(7)b
http://www.cisco.com/univercd/cc/td...p.htm#wp1261437
Cisco "Golden Bridge" documents
http://www.cisco.com/univercd/cc/td...x/4_4/index.htm
----------------------------------------------------------------------------
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, May 08, 2007 8:57 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] which ios to use for 3845
my 3845 was just dropped off.
what IOS are people recommending for this thing? primarily used as a voice gateway (2 T1/PRIs using MGCP) and for SRST. I don't think I will be doing much transcoding, (other than from PSTN to voip) or conferencing.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...there's no such thing as a bad timbit...
| |
| Carter, Bill 2007-05-11, 1:11 pm |
| I have SRST version 3.3 gateways with 7911g's. They worked in our
testing.
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Friday, May 11, 2007 8:53 AM
To: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] which ios to use for 3845
You really gotta like it when documentation conflicts.
And from srst 3.3 "supported firmware, platforms, etc", we get a table
that says 7911g is supported.
http://www.cisco.com/en/US/customer...s2169/prod_inst
allation_guide09186a00805fdf87.html
>From srst 4.1 datasheet we get a table that says 7911g is not supported
until 4.0
http://www.cisco.com/en/US/customer...s2169/products_
data_sheet0900aecd805e1e79.html
"round and round she goes, where she stops, nobody knows."
Cisco Unified IP Phone Support
Cisco Unified IP Phone or cisco Endpoint
File Name of Compatible cisco Unified CallManager
Firmware for SCCP
File Name of Compatible
Cisco Unified CallManager
Firmware for SIP
Cisco ATA-186
Cisco ATA-188
ATA030100SCCP040211A.zup
-
Cisco IP Communicator 2.0*
NA
NA
Cisco Unified IP Phone 7902G
CP7902040000SCCP040701A.sbin
-
Cisco Unified IP Phone 7905G
CP7902040000SCCP040701A.sbin
-
Cisco Unified IP Phone 7910
P00403020214.bin
-
Cisco IP Phone 7911G*
cmterm-7911-sccp.7-2-1.exe
-
Table 3. cisco Unified IP Phone Support Using SCCP
Phone
Cisco Unified SRST 2.1
Cisco Unified SRST 3.3
Cisco Unified SRST 3.4
Cisco Unified SRST 4.0
Cisco Unified SRST 4.1
Cisco Unified IP Phone 7970G and 7971G-GE models
-
X
X
X
X
Cisco Unified IP Phone 7960G and 7940G models
X
X
X
X
X
Cisco Unified IP Phone 7961G, 7941G, 7961G-GE, and 7941G-GE models
-
X
X
X
X
Cisco Unified IP Conference Station 7935
X
X
X
X
X
Cisco Unified IP Conference Station 7936
-
X
X
X
X
Cisco Unified IP Phone 7912G
-
X
X
X
X
Cisco Unified IP Phone 7911G
-
-
-
X
X
------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
....there's no such thing as a bad timbit...
----- Original Message -----
From: Lelio Fulgenzi <mailto:lelio@uoguelph.ca>
To: cisco-voip@puck.nether.net
Sent: Thursday, May 10, 2007 4:54 PM
Subject: Re: [cisco-voip] which ios to use for 3845
Well, considering we've got 7911s we need SRST for, looks like
it's 12.4(9)T or better for me!
Talk about bleeding edge...at least it looks like 12.4(11)T2 is
LD and not ED.
Thanks for all your suggestions.
------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario
N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...there's no such thing as a bad timbit...
----- Original Message -----
From: Carter, Bill <mailto:bcarter@sentinel.com>
To: Lelio Fulgenzi <mailto:lelio@uoguelph.ca>
Sent: Tuesday, May 08, 2007 12:45 PM
Subject: RE: [cisco-voip] which ios to use for 3845
12.4(6)T7 or 12.4(7)b
http://www.cisco.com/univercd/cc/td...tele/gblink/sys
tem/gbtst4x/4_4/rng44nip.htm#wp1261437
Cisco "Golden Bridge" documents
http://www.cisco.com/univercd/cc/td...tele/gblink/sys
tem/gbtst4x/4_4/index.htm
<http://www.cisco.com/univercd/cc/td..._tele/gblink/sy
stem/gbtst4x/4_4/rng44nip.htm>
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, May 08, 2007 8:57 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] which ios to use for 3845
my 3845 was just dropped off.
what IOS are people recommending for this thing?
primarily used as a voice gateway (2 T1/PRIs using MGCP) and for SRST. I
don't think I will be doing much transcoding, (other than from PSTN to
voip) or conferencing.
------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph,
Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...there's no such thing as a bad timbit...
| |
| Lelio Fulgenzi 2007-05-11, 1:11 pm |
| too bad the call-manager-fall back doesn't support 7911 for max-lines. or the 7936 for that matter.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
....there's no such thing as a bad timbit...
----- Original Message -----
From: Carter, Bill
To: Lelio Fulgenzi ; cisco-voip@puck.nether.net
Sent: Friday, May 11, 2007 1:52 PM
Subject: RE: [cisco-voip] which ios to use for 3845
I have SRST version 3.3 gateways with 7911g's. They worked in our testing.
------------------------------------------------------------------------------
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Friday, May 11, 2007 8:53 AM
To: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] which ios to use for 3845
You really gotta like it when documentation conflicts.
And from srst 3.3 "supported firmware, platforms, etc", we get a table that says 7911g is supported.
http://www.cisco.com/en/US/customer...00805fdf87.html
From srst 4.1 datasheet we get a table that says 7911g is not supported until 4.0
http://www.cisco.com/en/US/customer...cd805e1e79.html
"round and round she goes, where she stops, nobody knows."
Cisco Unified IP Phone Support
Cisco Unified IP Phone or cisco Endpoint
File Name of Compatible cisco Unified CallManager
Firmware for SCCP
File Name of Compatible
Cisco Unified CallManager
Firmware for SIP
Cisco ATA-186
Cisco ATA-188
ATA030100SCCP040211A.zup
-
Cisco IP Communicator 2.0*
NA
NA
Cisco Unified IP Phone 7902G
CP7902040000SCCP040701A.sbin
-
Cisco Unified IP Phone 7905G
CP7902040000SCCP040701A.sbin
-
Cisco Unified IP Phone 7910
P00403020214.bin
-
Cisco IP Phone 7911G*
cmterm-7911-sccp.7-2-1.exe
-
Table 3. cisco Unified IP Phone Support Using SCCP
Phone
Cisco Unified SRST 2.1
Cisco Unified SRST 3.3
Cisco Unified SRST 3.4
Cisco Unified SRST 4.0
Cisco Unified SRST 4.1
Cisco Unified IP Phone 7970G and 7971G-GE models
-
X
X
X
X
Cisco Unified IP Phone 7960G and 7940G models
X
X
X
X
X
Cisco Unified IP Phone 7961G, 7941G, 7961G-GE, and 7941G-GE models
-
X
X
X
X
Cisco Unified IP Conference Station 7935
X
X
X
X
X
Cisco Unified IP Conference Station 7936
-
X
X
X
X
Cisco Unified IP Phone 7912G
-
X
X
X
X
Cisco Unified IP Phone 7911G
-
-
-
X
X
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...there's no such thing as a bad timbit...
----- Original Message -----
From: Lelio Fulgenzi
To: cisco-voip@puck.nether.net
Sent: Thursday, May 10, 2007 4:54 PM
Subject: Re: [cisco-voip] which ios to use for 3845
Well, considering we've got 7911s we need SRST for, looks like it's 12.4(9)T or better for me!
Talk about bleeding edge...at least it looks like 12.4(11)T2 is LD and not ED.
Thanks for all your suggestions.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...there's no such thing as a bad timbit...
----- Original Message -----
From: Carter, Bill
To: Lelio Fulgenzi
Sent: Tuesday, May 08, 2007 12:45 PM
Subject: RE: [cisco-voip] which ios to use for 3845
12.4(6)T7 or 12.4(7)b
http://www.cisco.com/univercd/cc/td...p.htm#wp1261437
Cisco "Golden Bridge" documents
http://www.cisco.com/univercd/cc/td...x/4_4/index.htm
--------------------------------------------------------------------------
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, May 08, 2007 8:57 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] which ios to use for 3845
my 3845 was just dropped off.
what IOS are people recommending for this thing? primarily used as a voice gateway (2 T1/PRIs using MGCP) and for SRST. I don't think I will be doing much transcoding, (other than from PSTN to voip) or conferencing.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...there's no such thing as a bad timbit...
| |
| STEVEN CASPER 2007-05-20, 7:11 pm |
| I am running 12.4.12a on a 3845 that currently support about 100 7911
telephones. Tested SRST Thursday night - it took about 6 minutes for the
phones to register, no problems.
[vbcol=seagreen]
Well, considering we've got 7911s we need SRST for, looks like it's
12.4(9)T or better for me!
Talk about bleeding edge...at least it looks like 12.4(11)T2 is LD and
not ED.
Thanks for all your suggestions.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
....there's no such thing as a bad timbit...
----- Original Message -----
From: Carter, Bill
To: Lelio Fulgenzi
Sent: Tuesday, May 08, 2007 12:45 PM
Subject: RE: [cisco-voip] which ios to use for 3845
12.4(6)T7 or 12.4(7)b
http://www.cisco.com/univercd/cc/td...p.htm#wp1261437
Cisco "Golden Bridge" documents
http://www.cisco.com/univercd/cc/td...x/4_4/index.htm
------------------------------------------------------------------------------
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Lelio
Fulgenzi
Sent: Tuesday, May 08, 2007 8:57 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] which ios to use for 3845
my 3845 was just dropped off.
what IOS are people recommending for this thing? primarily used as a
voice gateway (2 T1/PRIs using MGCP) and for SRST. I don't think I will
be doing much transcoding, (other than from PSTN to voip) or
conferencing.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G
2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...there's no such thing as a bad timbit...
************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee. If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of th
e information contained in the transmission. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act. You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are r
eceiving the information.
There are risks associated with the use of electronic transmission. The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of
this transmission.
************************************
|
|
|
|
|