|
Home > Archive > Voice over IP Cisco > May 2007 > CCM 3.3 to 4.1 upgrade, update lines...
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
CCM 3.3 to 4.1 upgrade, update lines...
|
|
| Jonathan Charles 2007-05-13, 1:11 pm |
| So, standard 3.3 setup, each DN in a line 1 and line 2 partition...
Upgraded to 4.1(3) and was wondering if there is a batch file that will
delete the second line, change the max calls and busy trigger on line 1 to 4
and 2, respectively and change the CFNA and CFB settings on line 1 to go to
vmail.
This is happening enough that such a batch file would be immensely valuable.
Jonathan
| |
| Avner Izhar 2007-05-13, 7:11 pm |
| You can do most of it with BAT, if not all.
Haven't seen any batch for that sort of things yet ...
Regards,
Avner Izhar, CCIE #15999 (Voice)
Network Learning Inc.
________________________________
From: cisco-voip-bounces@puck.nether.net on behalf of Jonathan Charles
Sent: Sun 5/13/2007 9:53 AM
To: ciscovoip
Subject: [cisco-voip] CCM 3.3 to 4.1 upgrade, update lines...
So, standard 3.3 setup, each DN in a line 1 and line 2 partition...
Upgraded to 4.1(3) and was wondering if there is a batch file that will
delete the second line, change the max calls and busy trigger on line 1 to 4
and 2, respectively and change the CFNA and CFB settings on line 1 to go to
vmail.
This is happening enough that such a batch file would be immensely valuable.
Jonathan
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Fred Nielsen 2007-05-13, 7:11 pm |
| BAT will do most, and the AXL API allows access to everything that BAT can't
do. AXL calls can be batch scripted to do just about *anything* you can do
via the GUI.
On 5/13/07, Jonathan Charles <jonvoip@gmail.com> wrote:
>
> So, standard 3.3 setup, each DN in a line 1 and line 2 partition...
>
> Upgraded to 4.1(3) and was wondering if there is a batch file that will
> delete the second line, change the max calls and busy trigger on line 1 to 4
> and 2, respectively and change the CFNA and CFB settings on line 1 to go to
> vmail.
>
> This is happening enough that such a batch file would be immensely
> valuable.
>
>
>
>
>
>
> Jonathan
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
|
|
|
|
|