|
Home > Archive > Voice over IP Cisco > May 2007 > Unallocated/Unassigned Number for 911 call...
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Unallocated/Unassigned Number for 911 call...
|
|
| Jonathan Charles 2007-05-24, 7:11 pm |
| So, made a 911 test call:
VOICEGW#
*May 24 18:13:39.451: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8
callref = 0x004D
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98394
Exclusive, Channel 20
Calling Party Number i = 0x0181, '[removed]'
Plan:ISDN, Type:Unknown
Called Party Number i = 0x80, '911'
Plan:Unknown, Type:Unknown
*May 24 18:13:39.527: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8
callref = 0x804D
Cause i = 0x8081 - Unallocated/unassigned number
Any ideas?
Jonathan
| |
| Paul Choi 2007-05-24, 7:11 pm |
| Do you only get this result with 911? What about other
numbers?
--- Jonathan Charles <jonvoip@gmail.com> wrote:
> So, made a 911 test call:
>
> VOICEGW#
> *May 24 18:13:39.451: ISDN Se0/0/0:23 Q931: TX ->
> SETUP pd = 8
> callref = 0x004D
> Bearer Capability i = 0x8090A2
> Standard = CCITT
> Transfer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0xA98394
> Exclusive, Channel 20
> Calling Party Number i = 0x0181, '[removed]'
> Plan:ISDN, Type:Unknown
> Called Party Number i = 0x80, '911'
> Plan:Unknown, Type:Unknown
> *May 24 18:13:39.527: ISDN Se0/0/0:23 Q931: RX <-
> RELEASE_COMP pd = 8
> callref = 0x804D
> Cause i = 0x8081 - Unallocated/unassigned
> number
>
>
> Any ideas?
>
>
>
> Jonathan
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
________________________________________
________________________________________
____Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.
http://get.games.yahoo.com/proddesc...monopolyherenow
| |
| Carter, Bill 2007-05-25, 1:11 am |
| Just an update for everyone. The customer signed a waiver with the
Telco to remove 911 service on this circuit. Previously 911 service
utilized separate analog circuits.
So the Telco switch was saying 911 was an unallocated number because the
switch wasn't accepting 911 calls on this circuit.
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Paul Choi
Sent: Thursday, May 24, 2007 5:54 PM
To: Jonathan Charles; ciscovoip
Subject: Re: [cisco-voip] Unallocated/Unassigned Number for 911 call...
Do you only get this result with 911? What about other numbers?
--- Jonathan Charles <jonvoip@gmail.com> wrote:
> So, made a 911 test call:
>
> VOICEGW#
> *May 24 18:13:39.451: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref
> = 0x004D
> Bearer Capability i = 0x8090A2
> Standard = CCITT
> Transfer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0xA98394
> Exclusive, Channel 20
> Calling Party Number i = 0x0181, '[removed]'
> Plan:ISDN, Type:Unknown
> Called Party Number i = 0x80, '911'
> Plan:Unknown, Type:Unknown *May 24 18:13:39.527: ISDN
> Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x804D
> Cause i = 0x8081 - Unallocated/unassigned number
>
>
> Any ideas?
>
>
>
> Jonathan
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
________________________________________
________________________________
____________Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now
(it's updated for today's economy) at Yahoo! Games.
http://get.games.yahoo.com/proddesc...monopolyherenow
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|