Voice over IP Cisco - Re: FAX not working to one number *FIXED*

This is Interesting: Free IT Magazines  
Home > Archive > Voice over IP Cisco > May 2007 > Re: FAX not working to one number *FIXED*





You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author Re: FAX not working to one number *FIXED*
Erick Bergquist

2007-05-25, 1:11 am

Well, since SCCP only supports passthrough, I don't see it causing any problems if the commands are there. I guess the commands force it to skip over figuring out what to do dynamically, but if it can only do passthrough with SCCP then there is a breakdow
n somewhere. Oh well, I am happy to get past another weird FAX problem with one number and not causing any other FAX problems.

Now, TAC was suggesting going to Fax Relay now with MGCP or H323 and moving away from passthrough. So there must have been improvements, as before recent IOS versions passthrough was way to go. The new IOS versions (recent 12.4T) has a fax-relay command t
o make SG3 fax go to G3 fax also, but this is when doing Fax relay.



----- Original Message ----
From: Lelio Fulgenzi <lelio@uoguelph.ca>
To: Erick Bergquist <erickbe@yahoo.com>; Ahmed Elnagar <aelnagar@ACT-EG.COM>; ciscovoip <cisco-voip@puck.nether.net>
Sent: Thursday, May 24, 2007 9:05:16 PM
Subject: Re: [cisco-voip] FAX not working to one number *FIXED*

[cisco-voip] FAX not working to one number


DIV {
MARGIN:0px;}



we're about to deploy a vg224 with
sCCP.



think i should add this to my config from the
start?




----- Original Message -----

From:
Erick Bergquist


To: Lelio Fulgenzi ; Ahmed Elnagar
; ciscovoip

Sent: Thursday, May 24, 2007 9:23
PM

Subject: Re: [cisco-voip] FAX not working
to one number *FIXED*




FYI,


We got the one number working. We had to force the VG224 to do
fax and modem passthrough globally and by setting stcapp to enable passthrough
on each port. We had to do this even though SCCP (Stcapp) only supports
passthrough.

Commands added to VG224 config,




voice service voip
fax protocol
pass-through g711ulaw
modem passthrough nse codec g711ulaw


and then this, for each voice port...



stcapp register capability 2/0
modem-passthrough






-----
Original Message ----
From: Lelio Fulgenzi <lelio@uoguelph.ca>
To:
Ahmed Elnagar <aelnagar@ACT-EG.COM>; Erick Bergquist
<erickbe@yahoo.com>; ciscovoip
<cisco-voip@puck.nether.net>
Sent: Saturday, May 19, 2007 9:39:10
AM
Subject: Re: [cisco-voip] FAX not working to one number




where is this disabled?




-----
Original Message -----

From:
Ahmed Elnagar

To:
Erick Bergquist ; ciscovoip

Sent:
Saturday, May 19, 2007 9:21 AM

Subject:
Re: [cisco-voip] FAX not working to one number





try to make sure that ECM
feature is disabled. this may cause fax failure






Thanks
and Best Regards

Ahmed A. Elnagar
Network
Field Engineer



Advanced
Computer Technology (ACT)
16 Fawzy Ramah St.Off Shehab
St.Mohandessin, Giza, Egypt
Postal Code:12411 Cairo
Egypt

Mob:
+2010-2833868
Website:
www.act-eg.com
E-mail:
aelnagar@act-eg.com






From: cisco-voip-bounces@puck.nether.net on behalf of Erick
Bergquist
Sent: Wed 16-May-07 9:10 PM
To:
ciscovoip
Subject: [cisco-voip] FAX not working to one
number




I have a strange FAX issue, where a FAX machine connected to
a VG224 can send/receive FAX to any number but is not able to send one
outside number a FAX. It can receive FAX's from them fine, just not send.
The FAX machines phone or a phone plugged into the FAX phone line can call
the # fine so there is not a CSS issue, etc.

The FAX machine is
plugged into a VG224 with IOS 12.4(11)T , the VG224 is configured as SCCP
(stcapp) and we have tried setting the port capabilty to modem passthrough
and not with no change.

The PSTN Gateway is a cisco 2821 with a PRI,
it is MGCP and running IOS 12.4(9)T and has FAX relay disabled.

We
have tried 7 different FAX machines of different models and neither are able
to call this particular outside FAX machine when going over IPT. When the
FAX machines are plugged into a traditional analog circuit there is not a
problem and the FAX works fine.

Any
ideas?




________________________________________
________________________________________
____
Sucker-punch
spam with award-winning protection.
Try the free Yahoo! Mail Beta.
http://advision.webevents.yahoo.com...tures_spam.html
________________________________________
_______
cisco-voip
mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip






________________________________________
_______
cisco-voip mailing
list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip







Building a website is a piece of cake.
Yahoo! Small Business gives you all
the tools to get online.






________________________________________
________________________________________
____
Now that's room service! Choose from over 150,000 hotels
in 45,000 destinations on Yahoo! Travel to find your fit.
http://farechase.yahoo.com/promo-generic-14795097
Sponsored Links






Free braindumps | Software forum | Database administration forum

Copyright 2003 - 2008 webservertalk.com