| David Coulson 2007-05-25, 7:11 pm |
| I do it all the time with routers - Not with a 2800, but with others. I
can't imagine why it would have a problem, unless it's in the middle of
doing something to it while you swap it out.
Jonathan Charles wrote:
> So, I am curious, can you pull a CF card from a 2821 while the router
> is up and running?
>
> We need to replace flaky flash with a new one, but I would rather not
> have to talk a remote tech (low skillset) through a ROMMON TFTP
> operation..
>
> If not, we can do it the hard way....but I have heard rumors that it works...
>
> If it does, what are the risks...
>
>
>
> Jonathan
> ________________________________________
_______
> cisco-nsp mailing list cisco-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
________________________________________
_______
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
|