| Jonathan Charles 2007-05-29, 1:11 pm |
| The paging-dn feature on CME uses a multicast address... if the
speaker really can play-out multicast, it should work fine.
I would get one and test it, and return it if it doesn't work...
Jonathan
On 5/29/07, J=F6rg Wesely <joerg.wesely@intact-is.com> wrote:
> Hello,
>
> we've got a CM 4.1(3) cluster here. Now, there's a need for a simple
> overhead paging system. Would the following approach work?
>
> - A CCME is connected to the CM using an intercluster trunk.
> - A special ephone-dn is configured on the cme using the "feed ip
> <multicast address> <port>
> - Several CyberData VOIP ceiling speakers (www.cyberdata.net)are
> configured to the multicast address above.
>
> When dialing the special dn's number is on a phone at the CM and routed
> through the intercluster trunk, an announcement can be made.
>
> I would be happy if I could avoid a third-party paging application on
> the CM.
>
> best regards
>
> J=F6rg
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
|