Voice over IP Cisco - Re: getting dial-tone when dialing into FXO port while

This is Interesting: Free IT Magazines  
Home > Archive > Voice over IP Cisco > June 2007 > Re: getting dial-tone when dialing into FXO port while





You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author Re: getting dial-tone when dialing into FXO port while
Paul Choi

2007-06-13, 1:12 am

That is correct, AFAIK, you don't need dial peers for
the FXO ports unless you're planning on sending calls
out them.

Paul

--- Lelio Fulgenzi <lelio@uoguelph.ca> wrote:

> OK - Thanks. I wasn't sure about that. I was going
> to (and have) tested reloads to see if that command
> sticks and it looks like it does.
>
> For a minute it looked liked it added the MGCP
> dialpeers at the end of the config but it looks like
> I didn't save the previous reorder.
>
> Correct me if I'm wrong, but unless I want to send
> calls out these FXO ports, I don't need a dial-peer
> at all do I?
>
>
>

--------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * university of Guelph *
> Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> "Buffalo buffalo Buffalo buffalo buffalo buffalo
> Buffalo buffalo." WJR
>
> ----- Original Message -----
> From: Erick Bergquist
> To: Lelio Fulgenzi
> Cc: cisco-voip@puck.nether.net
> Sent: Tuesday, June 12, 2007 6:33 PM
> Subject: Re: [cisco-voip] getting dial-tone when
> dialing into FXO port while in SRST mode
>
>
> The connection plar command is what you need with
> FXOs in H.323 (SRST)
> mode. The MGCP config push won't remove it.
>
> On 6/12/07, Lelio Fulgenzi <lelio@uoguelph.ca>
> wrote:
> solution. Or at least what I
> port I get dial-tone. I need it
> see that you can configure
> what I gather I'm not supposed
> I'm using "ccm-manager
> the top and my 20 is after it.
> number" like I did on the PRIs,
> configure the dial-peer voice 20
> extension.
> Application mgcpapp in
> to the alternate app Default.
>

--------------------------------------------------------------------------------
> Guelph, Ontario N1G 2W1
>

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Buffalo buffalo." WJR
> https://puck.nether.net/mailman/listinfo/cisco-voip
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>





________________________________________
________________________________________
____
Pinpoint customers who are looking for what you sell.
http://searchmarketing.yahoo.com/
Sponsored Links






Free braindumps | Software forum | Database administration forum

Copyright 2003 - 2008 webservertalk.com