|
Home > Archive > Voice over IP Cisco > June 2007 > When dialing FXO I get Dial tone?
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
When dialing FXO I get Dial tone?
|
|
| Voll, Scott 2007-06-25, 7:11 pm |
| I setup a MGCP VGW with FXO. I have set it in CM to forward to my
extension(both). CSS / Partitions seem to be right. But when I call
those FXO ports, I get dial tone. What's up? What am I doing wrong?
Scott
| |
| CarlosOrtiz@bayviewfinancial.com 2007-06-25, 7:11 pm |
| How many digits do you see from the telco? From what I remember when I
have done this I was getting 7 digits and that matched the number on the
phone? Can you dial outbound?
"Voll, Scott" <Scott.Voll@wesd.org>
Sent by: cisco-voip-bounces@puck.nether.net
06/25/2007 03:19 PM
To
"cisco-voip" <cisco-voip@puck.nether.net>
cc
Subject
[cisco-voip] When dialing FXO I get Dial tone?
I setup a MGCP VGW with FXO. I have set it in CM to forward to my
extension(both). CSS / Partitions seem to be right. But when I call
those FXO ports, I get dial tone. What’s up? What am I doing wrong?
Scott___________________________________
____________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Lelio Fulgenzi 2007-06-25, 7:11 pm |
|
the mgcp dial-peers have to be first ahead of any h323 dialpeers
this was discussed on the list a while back, that's why i know. ;)
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo." WJR
----- Original Message -----
From: Voll, Scott
To: cisco-voip
Sent: Monday, June 25, 2007 3:19 PM
Subject: [cisco-voip] When dialing FXO I get Dial tone?
I setup a MGCP VGW with FXO. I have set it in CM to forward to my extension(both). CSS / Partitions seem to be right. But when I call those FXO ports, I get dial tone. What's up? What am I doing wrong?
Scott
------------------------------------------------------------------------------
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Voll, Scott 2007-06-25, 7:11 pm |
| I looks like a registration issue.
It's coming back on a VPN connection and I'm having issues with full
registration. Looking into it now.
Scott
________________________________
From: Lelio Fulgenzi [mailto:lelio@uoguelph.ca]
Sent: Monday, June 25, 2007 1:04 PM
To: Voll, Scott; cisco-voip
Subject: Re: [cisco-voip] When dialing FXO I get Dial tone?
the mgcp dial-peers have to be first ahead of any h323 dialpeers
this was discussed on the list a while back, that's why i know. ;)
------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."
WJR
----- Original Message -----
From: Voll, Scott <mailto:Scott.Voll@wesd.org>
To: cisco-voip <mailto:cisco-voip@puck.nether.net>
Sent: Monday, June 25, 2007 3:19 PM
Subject: [cisco-voip] When dialing FXO I get Dial tone?
I setup a MGCP VGW with FXO. I have set it in CM to forward to
my extension(both). CSS / Partitions seem to be right. But when I call
those FXO ports, I get dial tone. What's up? What am I doing wrong?
Scott
________________________________
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|