|
|
Hey guys,
I've got a 3640 w/ NM-HDV platform running 12.4(12) acting as a PRI<->VoIP
Gateway
Everything is working fine, but I wanted to change one dialpeer from g711u
to gsmfr for testing something, and find that I cannot.
It's my understanding that gsmfr should be available as a "medium"
complexity codec, but it's not available as a codec choice:
3640(config)#dial-peer voice 213 voip
3640(config-dial-peer)#codec gsmfr
^
% Invalid input detected at '^' marker.
3640(config-dial-peer)#codec ?
clear-channel Clear Channel 64000 bps (No voice capabilities: data transport only)
g711alaw G.711 A Law 64000 bps
g711ulaw G.711 u Law 64000 bps
g723ar53 G.723.1 ANNEX-A 5300 bps (contains built-in vad that cannot be disabled)
g723ar63 G.723.1 ANNEX-A 6300 bps (contains built-in vad that cannot be disabled)
g723r53 G.723.1 5300 bps
g723r63 G.723.1 6300 bps
g726r16 G.726 16000 bps
g726r24 G.726 24000 bps
g726r32 G.726 32000 bps
g728 G.728 16000 bps
g729br8 G.729 ANNEX-B 8000 bps (contains built-in vad that cannot be disabled)
g729r8 G.729 8000 bps
transparent transparent; uses the endpoint codec
This works fine on another 2811 that we're using for testing. Any ideas
would be appreciated.
- Mike
|
|