|
Home > Archive > Voice over IP Cisco > July 2007 > Message type not implemented
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Message type not implemented
|
|
| param singh 2007-07-27, 1:11 am |
| Hi All,
I have a customer who is having problems with their main number. They have a
new PRI and all the DID's on the PRI works fine but the main number is not
working.
I am getting the following error when I call the number.
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98382
Exclusive, Channel 2
Facility i = 0x9F8B0100A10F02010106072A8648CE1500040A
0100
Protocol Profile = Networking Extensions
0xA10F02010106072A8648CE1500040A0100
Component = Invoke component
Invoke Id = 1
Operation = InformationFollowing (calling_name)
Name information in subsequent FACILITY
message
Calling Party Number i = 0x2183, '3129251265'
Plan:ISDN, Type:National
Called Party Number i = 0xC1, '6513328000'
Plan:ISDN, Type:Subscriber(local)
Jul 26 16:48:46.606: ISDN Se0/1/0:23 Q931: TX -> SETUP_ACK pd = 8 callref =
0xA43A
Channel ID i = 0xA98382
Exclusive, Channel 2
Jul 26 16:48:46.618: ISDN Se0/1/0:23 Q931: RX <- STATUS pd = 8 callref =
0x243A
Cause i = 0x80E10D - Message type not implemented
Has anybody experienced this and is there something I need to be aware of or
change in Call manager to make this work. Please let me know.
Thanks
Param Singh
| |
| Voll, Scott 2007-07-27, 1:12 pm |
| MGCP or H323? Does the H323 router have the extension or is the
extension in CM for MGCP?
Scott
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of param singh
Sent: Thursday, July 26, 2007 7:30 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Message type not implemented
Hi All,
I have a customer who is having problems with their main number. They
have a new PRI and all the DID's on the PRI works fine but the main
number is not working.
I am getting the following error when I call the number.
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98382
Exclusive, Channel 2
Facility i = 0x9F8B0100A10F02010106072A8648CE1500040A
0100
Protocol Profile = Networking Extensions
0xA10F02010106072A8648CE1500040A0100
Component = Invoke component
Invoke Id = 1
Operation = InformationFollowing (calling_name)
Name information in subsequent FACILITY
message
Calling Party Number i = 0x2183, '3129251265'
Plan:ISDN, Type:National
Called Party Number i = 0xC1, '6513328000'
Plan:ISDN, Type:Subscriber(local)
Jul 26 16:48:46.606: ISDN Se0/1/0:23 Q931: TX -> SETUP_ACK pd = 8
callref = 0xA43A
Channel ID i = 0xA98382
Exclusive, Channel 2
Jul 26 16:48:46.618: ISDN Se0/1/0:23 Q931: RX <- STATUS pd = 8 callref
= 0x243A
Cause i = 0x80E10D - Message type not implemented
Has anybody experienced this and is there something I need to be aware
of or change in Call manager to make this work. Please let me know.
Thanks
Param Singh
| |
| Paul Choi 2007-07-28, 1:11 am |
| I'm encountering this "message type not implemented"
on a customer line but encountering no issues so I
don't think it is prudent to assume that is the error
behind your customer's problem.
--- param singh <paramds@gmail.com> wrote:
> Hi All,
>
>
>
> I have a customer who is having problems with their
> main number. They have a
> new PRI and all the DID's on the PRI works fine but
> the main number is not
> working.
>
> I am getting the following error when I call the
> number.
>
>
> Bearer Capability i = 0x8090A2
>
> Standard = CCITT
>
> Transfer Capability = Speech
>
> Transfer Mode = Circuit
>
> Transfer Rate = 64 kbit/s
>
> Channel ID i = 0xA98382
>
> Exclusive, Channel 2
>
> Facility i =
> 0x9F8B0100A10F02010106072A8648CE1500040A
0100
>
> Protocol Profile = Networking
> Extensions
>
> 0xA10F02010106072A8648CE1500040A0100
>
> Component = Invoke component
>
> Invoke Id = 1
>
> Operation =
> InformationFollowing (calling_name)
>
> Name information in
> subsequent FACILITY
> message
>
> Calling Party Number i = 0x2183,
> '3129251265'
>
> Plan:ISDN, Type:National
>
> Called Party Number i = 0xC1, '6513328000'
>
> Plan:ISDN, Type:Subscriber(local)
>
> Jul 26 16:48:46.606: ISDN Se0/1/0:23 Q931: TX ->
> SETUP_ACK pd = 8 callref =
> 0xA43A
>
> Channel ID i = 0xA98382
>
> Exclusive, Channel 2
>
> Jul 26 16:48:46.618: ISDN Se0/1/0:23 Q931: RX <-
> STATUS pd = 8 callref =
> 0x243A
>
> Cause i = 0x80E10D - Message type not
> implemented
>
>
>
> Has anybody experienced this and is there something
> I need to be aware of or
> change in Call manager to make this work. Please let
> me know.
>
>
>
>
>
> Thanks
>
>
> Param Singh
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
________________________________________
________________________________________
____
Building a website is a piece of cake. Yahoo! Small Business gives you all the tools to get online.
http://smallbusiness.yahoo.com/webhosting
|
|
|
|
|