|
Home > Archive > Voice over IP Cisco > July 2007 > Ip Phone setup for a predefined number
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Ip Phone setup for a predefined number
|
|
| Kyle Hansen (HCH) 2007-07-31, 7:11 pm |
| Hello, everyone,
I was wondering if anyone knows how to setup a Cisco
7960 so when it is picked up it dials a pre-defined phone number or ext.
Thank you,
Kyle Hansen
Computing and Technology Group (C.A.T.G.)
Customer Support Lead/Project Manager
Huntsman Cancer Hospital
1950 Circle of Hope - Salt Lake City, UT 84112. 801.585.0330
If you need computer support please call the HELPDESK @ 585-0330 or
Submit a request for support at:
www.hci.utah.edu/internal/computer_support.html
| |
|
|
| Lelio Fulgenzi 2007-07-31, 7:11 pm |
| This is referred to as a PLAR in cisco docs. Say you want to create a PLAR to your security services department which has a DN of 555 Here's how you do it.
1.. Create partition, e.g. PLAR_to_SecurityServices_PT
2.. Create a calling search space, e.g. PLAR_to_SecurityServices_CSS
3.. Add PLAR_to_SecurityServices_PT as the ONLY partition to PLAR_to_SecurityServices_CSS calling search space.
4.. Create a blank translation in the PLAR_to_SecurityServices_PT partition with the appropriate calling search space to access the final destination which you will add as the Called Party Transform Mask, e.g. 555
5.. Configure a DN with the calling search space PLAR_to_SecurityServices_CSS.
6.. Lift up handset on the DN and voila. If not the primary line, you will have to press the line button.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo." WJR
----- Original Message -----
From: Kyle Hansen (HCH)
To: cisco-voip@puck.nether.net
Sent: Tuesday, July 31, 2007 3:24 PM
Subject: [cisco-voip] Ip Phone setup for a predefined number
Hello, everyone,
I was wondering if anyone knows how to setup a cisco 7960 so when it is picked up it dials a pre-defined phone number or ext.
Thank you,
Kyle Hansen
Computing and Technology Group (C.A.T.G.)
Customer Support Lead/Project Manager
Huntsman Cancer Hospital
1950 Circle of Hope - Salt Lake City, UT 84112. 801.585.0330
If you need computer support please call the HELPDESK @ 585-0330 or
Submit a request for support at: www.hci.utah.edu/internal/computer_support.html
------------------------------------------------------------------------------
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Paul Choi 2007-07-31, 7:11 pm |
| Use the trunk setting underneath the ephone.
--- "Kyle Hansen (HCH)" <kyle.hansen@hci.utah.edu>
wrote:
> Hello, everyone,
>
>
>
> I was wondering if anyone knows how
> to setup a Cisco
> 7960 so when it is picked up it dials a pre-defined
> phone number or ext.
>
________________________________________
________________________________________
____
Yahoo! oneSearch: Finally, mobile search
that gives answers, not web links.
http://mobile.yahoo.com/mobileweb/o...ch?refer=1ONXIC
|
|
|
|
|