|
Home > Archive > Voice over IP Cisco > August 2007 > CM Installation
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Ahmed Elnagar 2007-08-09, 7:11 am |
| Hello all;
Is there is an option to install cisco Callmanager from scratch without
using a monitor or a keyboard, just from my laptop. Can this be done?
Regards,
Ahmed Elnagar
| |
|
|
| Ahmed Elnagar 2007-08-09, 1:11 pm |
| But seems it is not supported for the 4.x train, what about the ILO port
on HP servers, could it help in this??
________________________________
From: Wes Sisk [mailto:wsisk@cisco.com]
Sent: Thursday, August 09, 2007 5:08 PM
To: Ahmed Elnagar
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CM Installation
'answer file' feature
http://www.cisco.com/en/US/products..._release_note09
186a008079a217.html#wp350593
/Wes
Ahmed Elnagar wrote:
Hello all;
Is there is an option to install cisco Callmanager from scratch without
using a monitor or a keyboard, just from my laptop. Can this be done?
Regards,
Ahmed Elnagar
________________________________
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Jonathan Charles 2007-08-09, 1:11 pm |
| I have installed CCM and Unity completely thru VNC...
The Unity install thru ILO has failed in the past... (Cisco pointed to
it being because of ILO, but I didn't believe it).
Jonathan
On 8/9/07, Ahmed Elnagar <aelnagar@act-eg.com> wrote:
>
>
>
>
> But seems it is not supported for the 4.x train, what about the ILO port on
> HP servers, could it help in this??
>
>
>
> ________________________________
>
>
> From: Wes Sisk [mailto:wsisk@cisco.com]
> Sent: Thursday, August 09, 2007 5:08 PM
> To: Ahmed Elnagar
> Cc: cisco-voip@puck.nether.net
> Subject: Re: [cisco-voip] CM Installation
>
>
>
>
> 'answer file' feature
> http://www.cisco.com/en/US/products...7.html#wp350593
>
> /Wes
>
> Ahmed Elnagar wrote:
>
> Hello all;
>
>
>
> Is there is an option to install cisco Callmanager from scratch without
> using a monitor or a keyboard, just from my laptop. Can this be done?
>
>
>
> Regards,
>
> Ahmed Elnagar
>
>
> ________________________________
>
>
>
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
| |
| Ahmed Elnagar 2007-08-09, 1:11 pm |
| Yes I know the VNC could solve the application part (CallManager or
Unity). But what I need is the operating system part, I face this
problem in sites when I have to reinstall everything and I don't have a
screen and a keyboard nearby (strange situation I know but I faced it)
-----Original Message-----
From: Jonathan Charles [mailto:jonvoip@gmail.com]
Sent: Thursday, August 09, 2007 5:22 PM
To: Ahmed Elnagar
Cc: Wes Sisk; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CM Installation
I have installed CCM and Unity completely thru VNC...
The Unity install thru ILO has failed in the past... (Cisco pointed to
it being because of ILO, but I didn't believe it).
Jonathan
On 8/9/07, Ahmed Elnagar <aelnagar@act-eg.com> wrote:
>
>
>
>
> But seems it is not supported for the 4.x train, what about the ILO
port on
> HP servers, could it help in this??
>
>
>
> ________________________________
>
>
> From: Wes Sisk [mailto:wsisk@cisco.com]
> Sent: Thursday, August 09, 2007 5:08 PM
> To: Ahmed Elnagar
> Cc: cisco-voip@puck.nether.net
> Subject: Re: [cisco-voip] CM Installation
>
>
>
>
> 'answer file' feature
>
http://www.cisco.com/en/US/products..._release_note09
186a008079a217.html#wp350593
>
> /Wes
>
> Ahmed Elnagar wrote:
>
> Hello all;
>
>
>
> Is there is an option to install cisco Callmanager from scratch
without
> using a monitor or a keyboard, just from my laptop. Can this be done?
>
>
>
> Regards,
>
> Ahmed Elnagar
>
>
> ________________________________
>
>
>
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
| |
| Jonathan Charles 2007-08-09, 1:11 pm |
| It isn't strange at all... a lot of people don't have KVM connected to
their CCMs...
Your only real option is ILO (or whatever IBM equivalent there is) or
to get a KVM hooked up for OS and then install VNC and go from there.
J
On 8/9/07, Ahmed Elnagar <aelnagar@act-eg.com> wrote:
> Yes I know the VNC could solve the application part (CallManager or
> Unity). But what I need is the operating system part, I face this
> problem in sites when I have to reinstall everything and I don't have a
> screen and a keyboard nearby (strange situation I know but I faced it)
>
> -----Original Message-----
> From: Jonathan Charles [mailto:jonvoip@gmail.com]
> Sent: Thursday, August 09, 2007 5:22 PM
> To: Ahmed Elnagar
> Cc: Wes Sisk; cisco-voip@puck.nether.net
> Subject: Re: [cisco-voip] CM Installation
>
> I have installed CCM and Unity completely thru VNC...
>
> The Unity install thru ILO has failed in the past... (Cisco pointed to
> it being because of ILO, but I didn't believe it).
>
>
> Jonathan
>
> On 8/9/07, Ahmed Elnagar <aelnagar@act-eg.com> wrote:
> port on
> http://www.cisco.com/en/US/products..._release_note09
> 186a008079a217.html#wp350593
> without
>
| |
| David Sullivan 2007-08-09, 1:11 pm |
| cisco-voip-bounces@puck.nether.net wrote:
> I have installed CCM and Unity completely thru VNC...
>
> The Unity install thru ILO has failed in the past... (Cisco
> pointed to it being because of ILO, but I didn't believe it).
>
I'd find it hard to believe, the only potential oddity about ilo is the
media redirection pretends to be a USB cd/floppy drive which might be a
problem though I can't say I've had any problems installing any using
it, you could of course put the CD in the server's physical drive and
just use the ILO for keyboard video and mouse.
David Sullivan
IT Services
Barnet College
-----------------------------------------------------------------------------
This communication may contain privileged or confidential information which
is for the exclusive use of the intended recipient. If you are not the
intended recipient, please note that you may not distribute or use this
communication or the information it contains. If this e-mail has reached you
in error, please delete it and any attachment.
Internet communications are not secure and Barnet college does not accept
legal responsibility for the content of this message. Any views or opinions
expressed are those of the author and not necessarily those of Barnet College.
Please note that Barnet college reserves the right to monitor the
source/destinations of all incoming or outgoing e-mail communications.
-----------------------------------------------------------------------------
| |
|
|
| Paul Choi 2007-08-09, 1:11 pm |
| On that note, I'd just like to say
STAY THE HELL AWAY FROM AVOCENT!
We installed an IP-KVM and everytime we'd try to
remotely administer the CCM/Unity/CRS boxen attached
to them, random weird crap would happen. The KVM would
turn the power off or reboot the boxes. Beware of
avocent. Their support sucks eggs too unless you're
willing to buy into their "installation support scam"
for several thousands of dollars.
--- Wes Sisk <wsisk@cisco.com> wrote:
---------------------------------
You need an IP-KVM then, or iLo. /wes
Ahmed Elnagar wrote:
Yes I know the VNC could solve the application part
(CallManager orUnity). But what I need is the
operating system part, I face thisproblem in sites
when I have to reinstall everything and I don't have
ascreen and a keyboard nearby (strange situation I
know but I faced it)-----Original Message-----From:
Jonathan Charles [mailto:jonvoip@gmail.com] Sent:
Thursday, August 09, 2007 5:22 PMTo: Ahmed ElnagarCc:
Wes Sisk; cisco-voip@puck.nether.netSubject: Re:
[cisco-voip] CM InstallationI have installed CCM and
Unity completely thru VNC...The Unity install thru ILO
has failed in the past... (Cisco pointed toit being
because of ILO, but I didn't believe it).JonathanOn
8/9/07, Ahmed Elnagar <aelnagar@act-eg.com> wrote:
But seems it is not supported for the 4.x train, what
about the ILO
port on
HP servers, could it help in this??
________________________________From: Wes Sisk
[mailto:wsisk@cisco.com] Sent: Thursday, August 09,
2007 5:08 PM To: Ahmed Elnagar Cc:
cisco-voip@puck.nether.net Subject: Re: [cisco-voip]
CM Installation'answer file' feature
http://www.cisco.com/en/US/products...7.html#wp350593
/Wes Ahmed Elnagar wrote:Hello all;Is there is an
option to install cisco Callmanager from scratch
without
using a monitor or a keyboard, just from my laptop.
Can this be done?Regards,Ahmed
Elnagar_________________________________
________________________________________
______cisco-voip
mailing
listcisco-voip@puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco- voip____________________________________
___________cisco-voip
mailing
listcisco-voip@puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
________________________________________
________________________________________
____
Yahoo! oneSearch: Finally, mobile search
that gives answers, not web links.
http://mobile.yahoo.com/mobileweb/o...ch?refer=1ONXIC
|
|
|
|
|