|
Home > Archive > Voice over IP Cisco > August 2007 > fxo ports and fct CCM 4.1.3
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
fxo ports and fct CCM 4.1.3
|
|
| gokhan senol 2007-08-09, 1:11 pm |
| Hi
i need your help about 2 problems below
1. I got CCM 4.1.3 and 2851 gateway,
there is one VIC2-4FXO card and FCT devices which are connected to these FXO ports for GSM calls
the problem is that sometimesFCT s are locked. And the customer wanna see which one is locked
Is it possible to see fxo port status from callmanager . I can check it from gateway by executing ' show voice port summary' but I dont know how to see from CCM webpage,i wanna see if the port is really used at that moment.
2.Also another thing ; when i call GSM from fct devices , sometimes ip phone displays that it is connected and the connected time is increasing but actually the call is not set up. I wait 50-55 seconds but there isno even ring tone.
And then i close the phone adn call again.
thanks a lot
________________________________________
________________________________________
____
Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.
http://get.games.yahoo.com/proddesc...monopolyherenow
| |
| Ocampo, Walter 2007-08-09, 1:11 pm |
| You need to launch the RTMT, It will display the status of the port in
real time.
http://www.cisco.com/en/US/products...ucts_administra
tion_guide_chapter09186a008062a98c.html#wp28847
Regards,
Walter Ocampo
System Network Analyst
Office of Information Technology
540 S.E 3rd. Ave, Suite 300
Fort Lauderdale, FL 33301
(954) 357 8041 Cell (954) 632 8228
wocampo@broward.org
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of gokhan senol
Sent: Thursday, August 09, 2007 10:43 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] fxo ports and fct CCM 4.1.3
Hi
i need your help about 2 problems below
1. I got CCM 4.1.3 and 2851 gateway,
there is one VIC2-4FXO card and FCT devices which are connected to
these FXO ports for GSM calls
the problem is that sometimes FCT s are locked. And the customer wanna
see which one is locked
Is it possible to see fxo port status from callmanager . I can check it
from gateway by executing ' show voice port summary' but I dont know
how to see from CCM webpage,i wanna see if the port is really used at
that moment.
2.Also another thing ; when i call GSM from fct devices , sometimes ip
phone displays that it is connected and the connected time is increasing
but actually the call is not set up. I wait 50-55 seconds but there is
no even ring tone.
And then i close the phone adn call again.
thanks a lot
________________________________
Take the Internet to Go: Yahoo!Go puts the Internet in your pocket:
<http://us.rd.yahoo.com/evt=48253/*h.../go?refer=1GNXI
C> mail, news, photos & more.
|
|
|
|
|