|
Home > Archive > Voice over IP Cisco > August 2007 > UCM 6.X Intercom
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Carter, Bill 2007-08-13, 7:11 pm |
|
Can the UCM 6.X Intercom feature be used for paging to the phones?
Where 1 user could send a page to all IP Phones ?
| |
| Jason Aarons \(US\) 2007-08-13, 7:11 pm |
| I understand it requires using a line on a phone, so if your 7941 has a
dn on both lines already you can't use Intercom unless you remove a
line. Can anyone vouch for this?
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Carter, Bill
Sent: Monday, August 13, 2007 3:41 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] UCM 6.X Intercom
Can the UCM 6.X Intercom feature be used for paging to the phones?
Where 1 user could send a page to all IP Phones ?
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
| |
| Carter, Bill 2007-08-13, 7:11 pm |
| That is correct. An Intercom line occupies 1 dedication button on a
phone.
-----Original Message-----
From: Jason Aarons (US) [mailto:jason.aarons@us.didata.com]
Sent: Monday, August 13, 2007 2:51 PM
To: Carter, Bill; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] UCM 6.X Intercom
I understand it requires using a line on a phone, so if your 7941 has a
dn on both lines already you can't use Intercom unless you remove a
line. Can anyone vouch for this?
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Carter, Bill
Sent: Monday, August 13, 2007 3:41 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] UCM 6.X Intercom
Can the UCM 6.X Intercom feature be used for paging to the phones?
Where 1 user could send a page to all IP Phones ?
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain confidential
and privileged information and is for use by the designated addressee(s)
named above only. If you are not the intended addressee, you are hereby
notified that you have received this communication in error and that any
use or reproduction of this email or its contents is strictly prohibited
and may be unlawful. If you have received this communication in error,
please notify us immediately by replying to this message and deleting it
from your computer. Thank you.
| |
| Darren Smith 2007-08-13, 7:11 pm |
| The intercom feature can only work in a one to one manner, not one to
many.
If you require one to many functionality, i suggest looking at the
Berbee paging product.
Kind Regards
Darren Smith
Solutions Architect - Connectivity
Dimension Data
~~~~~~~~~~~~~~~~~~~~~~~~~
Level 1, 139 Coronation Drive,Milton
Brisbane, 4064
Direct: 07 3292 1999
Mobile: 0417 491055
Fax: 07 3292 1300
E-Mail: darren.smith2@didata.com.au <mailto:darren.smith2@didata.com.au>
For more information about Dimension Data, please go to
www.dimensiondata.com <http://www.dimensiondata.com/>
****************************************
**************************************
- NOTICE FROM DIMENSION DATA AUSTRALIA
This message is confidential, and may contain proprietary or legally privileged information. If you have received this email in error, please notify the sender and delete it immediately.
Internet communications are not secure. You should scan this message and any attachments for viruses. Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message orany attachments.
****************************************
**************************************
| |
| Nick Kassel 2007-08-14, 7:11 am |
| The intercom feature cannot be used for sending to more that one user it
is a point to point intercom.
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Carter, Bill
Sent: 13 August 2007 20:41
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] UCM 6.X Intercom
Can the UCM 6.X Intercom feature be used for paging to the phones?
Where 1 user could send a page to all IP Phones ?
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
********************SAVE PAPER - THINK BEFORE YOU PRINT***********************************
***************
The information contained in this e-mail is strictly confidential, some or all of which may be legally privileged.
Access to this e-mail by any person other than the recipient is prohibited. If you have received this message in
error, any use, disclosure, copying, printing, distribution of, replying to or any action taken or omitted to be
taken in reliance on this e-mail, is prohibited. Please advise the sender immediately should this e-mail have been
incorrectly addressed or transmitted, and then delete the email and any attachment sent with it from your computer.
You are advised that urgent, time sensitive and confidential communications should not be sent by e-mail. You
accept that any instructions are deemed to have been given at the time the recipient(s) accesses them and that
delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).
You acknowledge that e-mails are not secure and you accept the risk of malfunction, viruses, unauthorised
interference, mis-delivery or delay. Charles Stanley reserves the right to monitor and/or record emails sent and
received via its network for any lawful business purpose in accordance with applicable law and regulations.
****************************************
****************************************
***********************
Charles Stanley & Co. Ltd
Registered Office: 25 Luke Street London EC2A 4AR
Tel: 0207 739 8200 Fax: 0207 739 7798
Registered in England No. 1903304
Charles Stanley Sutherlands and Charles Stanley Securities are divisions of Charles Stanley & Co. Ltd
Authorised and Regulated by the Financial Services Authority, Member of the London Stock Exchange, The
International Capital Market Association and The London International Financial Futures & Options Exchange.
This footnote also confirms that this email message has been swept by McAfee VirusScan and SurfControl Email
Filter software.
|
|
|
|
|