| Steve G 2007-08-29, 1:11 pm |
| Sorry, I failed to mention that I was installing this CUE module integrated
with CCM, not CME.
On 8/29/07, Erik Erasmus (E) <ErasmuE4@telkom.co.za> wrote:
>
> In a UC 500 update cisco mentioned something about running remote phones
> on UC500. maybe you can try and get a presentation on UC500. As far as I
> know it is based on CME so the functionality will be the same
>
>
>
>
>
>
>
> Erik erasmus
>
>
> ------------------------------
>
> *From:* cisco-voip-bounces@puck.nether.net [mailto:
> cisco-voip-bounces@puck.nether.net] *On Behalf Of *Steve G
> *Sent:* Tuesday, August 28, 2007 5:21 PM
> *To:* cisco-voip@puck-nether.net
> *Subject:* [cisco-voip] Deploying Centralized CUE for Multisite WAN
>
>
>
> Does anyone have experience with CUE servicing 3 to 4 WAN sites? I am
> curious how this has worked and if there are any pitfalls I need to worry
> about. 3 of my sites use a common gateway for PSTN (PRI) access, but one
> has it's own PSTN connection with a PRI. I have read on CCO that it is only
> supported as 1 SRST site per CUE Module. They also need 4 different
> autoattendants, which CUE allows for 3 + the default. Can I modify the
> default AA for my 4th AA? Yea, this is another one of those hairbrained
> Sales Engineer ideas.
>
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~
> This e-mail is subject to an electronic communication legal notice,
> available at :
> http://www.telkom.co.za/TelkomEMailLegalNotice.PDF
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
>
>
|