|
Home > Archive > Voice over IP Cisco > September 2007 > FXS not registering
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
FXS not registering
|
|
| Scott Voll 2007-09-07, 7:12 pm |
| I have a 3845 with FXS ports. I configure the FXS port and it does NOT
register. What did I do wrong. one's registered and one is not. I don't
what to bounce MGCP as I don't want to loose the PRI's also on this GW.
Any ideas?
CM 5.1.2
Thanks
Scott
| |
| Kalle Tetto 2007-09-08, 1:12 am |
| Scott,
I do not know why it is not registering, but I can tell you for sure,
that you will not bounce MGCP on your PRI, if you use the FXS ports only
with H323, as pots dial peer. Or is this not your concern?
Cheers
Scott Voll schrieb:
> I have a 3845 with FXS ports. I configure the FXS port and it does NOT
> register. What did I do wrong. one's registered and one is not. I
> don't what to bounce MGCP as I don't want to loose the PRI's also on
> this GW.
>
> Any ideas?
>
> CM 5.1.2
>
> Thanks
>
> Scott
>
>
> ------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Scott Voll 2007-09-10, 1:11 pm |
| a shut no shut of the voice-port fixed it.
Thanks for all the offline replies.
Scott
On 9/7/07, Scott Voll <svoll.voip@gmail.com> wrote:
>
> I have a 3845 with FXS ports. I configure the FXS port and it does NOT
> register. What did I do wrong. one's registered and one is not. I don't
> what to bounce MGCP as I don't want to loose the PRI's also on this GW.
>
> Any ideas?
>
> CM 5.1.2
>
> Thanks
>
> Scott
>
|
|
|
|
|