Voice over IP Cisco - Re: Analog phones cant transfer calls on 2811 acting

This is Interesting: Free IT Magazines  
Home > Archive > Voice over IP Cisco > September 2007 > Re: Analog phones cant transfer calls on 2811 acting





You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author Re: Analog phones cant transfer calls on 2811 acting
Fedorov, Konstantin

2007-09-20, 1:12 pm

Hello



How I know , hookflash transfer work only with MGCP.



May be I am wrong and some thing changed. But some time ago MGCP was
only option to do this



-----------------------
Sincerely Yours,
Konstantin Fedorov

_____

From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Cucumber Green
Sent: Thursday, September 20, 2007 7:53 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Analog phones cant transfer calls on 2811 acting
asH323 gw to UCM 4.2(3)



Analog phones can send and receive calls from IP phones, but

when pressing the hookflash key at the analog phone, the analog phone
does not get a dial tone in order to transfer the call



Phones are hooked into FXS ports on a 2811 and will use G729 codec.



I have already checked the "Media Termination Point required" check box
in the gateway configuration at call manager (using unified call manager
4.2(3) ). I thought that would do the trick, but it didnt, any ideas?



This is the gateway config (IOS version 12.4(3g) spservicesK9)



!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
ip subnet-zero
!
!
ip cef
!
!
no ip domain lookup
!
voice-card 0
no dspfarm
!
!
!
!
interface Loopback0
ip address X.X.X.X 255.255.255.255
h323-gateway voip bind srcaddr X.X.X.X
!
!
ip classless
ip route 0.0.0.0 0.0.0.0 X.X.X.X 254
!
!
control-plane
!
!
!
voice-port 0/1/0
signal loopStart
!
voice-port 0/1/1
signal loopStart
!
dial-peer voice 10 pots
destination-pattern 50001
port 0/1/0
!
dial-peer voice 20 pots
destination-pattern 50002
port 0/1/1
!
dial-peer voice 1 voip
preference 1
destination-pattern 1...
session target ipv4:X.X.X.X
dtmf-relay h245-alphanumeric
codec g729r8 bytes 40
ip qos dscp cs3 media
ip qos dscp cs3 signaling
!
dial-peer voice 4 voip
preference 2
destination-pattern 1...
session target ipv4:X.X.X.X
dtmf-relay h245-alphanumeric
codec g729r8 bytes 40
ip qos dscp cs3 media
ip qos dscp cs3 signaling
!



_____

Be a better Globetrotter. Get better travel answers
<http://us.rd.yahoo.com/evt=48254/*h...m/dir/_ylc=X3oD
MTI5MGx2aThyBF9TAzIxMTU1MDAzNTIEX3MDMzk2
NTQ1MTAzBHNlYwNCQUJwaWxsYXJfTklf
MzYwBHNsawNQcm9kdWN0X3F1ZXN0aW9uX3BhZ2U-?link=list&sid=396545469> from
someone who knows.
Yahoo! Answers - Check it out.


Sponsored Links






Free braindumps | Software forum | Database administration forum

Copyright 2003 - 2008 webservertalk.com