| Matthew Saskin 2007-09-20, 7:11 pm |
| Not sure how to do this within CCM natively - if you're running H.323 on
the gateway you could handle the calls there and pass along to a
specific DN within callmanager.
-matt
Tim Reimers wrote:
>
>
> Blocking/Routing calls based on Caller ID with CCM
>
> Is there any functionality for this in CCM 4.12 ???
>
> We do not have IPCC or anything like that, unless there's a 'lite'
> version inside CCM that I'm not aware of.
>
> We're receiving bomb threats repeatedly at a highschool, and need to
> either block or route calls with no Caller ID or with known numbers.
>
> We could either route the calls to an announce-only mailbox telling
> people to enable CallerID and call us back, or simply drop the calls.
>
>
> Tim Reimers
> Assistant Network Administrator
> Asheville City Schools
> Desk- 828-350-6195 Mobile-828-545-3104
> fax- 828-255-5454
>
>
> Most days, there are several fires burning at once. Some days, what's
> burning is your fire extinguisher.
> To err is human; to truly screw it up requires the root password.
>
>
>
>
>
>
> ------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
|