| Ted Nugent 2007-09-21, 7:11 am |
| With Feature codes as you would with an ATA or VG248... check out table 3
http://www.cisco.com/en/US/products....html#wp1049432
On 9/20/07, Jason Aarons (US) <jason.aarons@us.didata.com> wrote:
>
> How are you supposed to transfer a call using an analog phone on a VG224
> that is SCCP? Can this be done? I didn't realize it was a feature!
>
>
>
> *From:* cisco-voip-bounces@puck.nether.net [mailto:
> cisco-voip-bounces@puck.nether.net] *On Behalf Of *Ted Nugent
> *Sent:* Thursday, September 20, 2007 11:45 PM
> *To:* Lelio Fulgenzi
> *Cc:* cisco-voip@puck.nether.net
> *Subject:* Re: [cisco-voip] Antw: Analog phones cant transfer calls
> on2811acting asH323 gw to UCM 4.2 (3)
>
>
>
> Yep same here and I wondered about that also until i tried to add an ISR
> FXS SCCP port to CM 4.1... its not an option like in 5.1 for example, I'm
> guessing thats what they're referring to...?
>
>
>
>
> On 9/20/07, *Lelio Fulgenzi* <lelio@uoguelph.ca> wrote:
>
> I think the documentation is misleading...I'm using supplementary services
> w/ SCCP on the VG224 with CCM 4.1(3) with no problems.
>
> ----- Original Message -----
>
> *From:* Ted Nugent <tednugent73@gmail.com>
>
> *To:* Cucumber Green <greencucumber2007@yahoo.com>
>
> *Cc:* cisco-voip@puck.nether.net
>
> *Sent:* Thursday, September 20, 2007 10:21 PM
>
> *Subject:* Re: [cisco-voip] Antw: Analog phones cant transfer calls on
> 2811acting asH323 gw to UCM 4.2 (3)
>
>
>
>
> If you need features with fxs you might want to look into SCCP for FXS
> controller as you would with a VG224 and h323 for and PSTN/PRI access etc.
> (see the link you need CM4.2+ and a certain rev of IOS depending on your
> hardware).
>
>
>
> http://www.cisco.com/en/US/partner/....html#wp1304455
>
> <http://www.cisco.com/en/US/partner/...html#wp1304455+>
>
>
>
>
>
>
>
>
>
>
>
> On 9/20/07, *Cucumber Green* <greencucumber2007@yahoo.com > wrote:
>
> Hello!
>
>
>
> Yeah I have tried this without luck, I guess it only works if the H323
> gateway has a FXO
>
> connection to a PBX
>
> *Robert Schuknecht <rschuknecht@gmx.de>* wrote:
>
> Hi Cucumber,
>
> did you try to adjust the the hook-flash timer under the voice-port?
> This timer has to equal on the voice-port and the connected telephone.
>
> /Robert
>
>
>
> September 2007 um 17:53 in Nachricht 3ab0adee131ef58c7afb0ea50017a410:
> does
> in
> 4.2(3)
> knows.
>
>
> ------------------------------
>
> Don't let your dream ride pass you by. Make it a reality<http://us.rd.yahoo.com/evt=51200/*h...YW
1jYXI->with Yahoo! Autos.
>
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> ------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> ------------------------------
>
> *Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
|