|
Home > Archive > Voice over IP Cisco > September 2007 > Deny new incoming PRI calls on AS5350XM
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Deny new incoming PRI calls on AS5350XM
|
|
| Kristian Kielhofner 2007-09-21, 1:12 pm |
| Hey,
I've got an AS5350XM running 12.3(14)T7. I need to take a T1/PRI
down and move it to another interface. Is there a command/config
option that will set the current interface to not accept any new calls
but preserve existing calls?
Thanks!
--
Kristian Kielhofner
| |
|
|
| Kristian Kielhofner 2007-09-21, 1:12 pm |
| On 9/21/07, Wes Sisk <wsisk@cisco.com> wrote:
>
> http://www.cisco.com/en/US/customer....html#wp1213513
>
>
> isdn service
>
> To take an individual B channel or an entire PRI interface out of service or
> set it to a different channel service state that is passed to a
> time-division multiplexing (TDM) switch at the Public Switched Telephone
> Network (PSTN), use the isdn service command in interface configuration
> mode. To remove the configuration, use the no form of the command.
>
> isdn service [dsl number | nfas-int number] b_channel number {state {0 | 1 |
> 2} [hard | immediate | soft]}
>
>
> /wes
>
Wes,
Thanks a lot - worked like a charm!
--
Kristian Kielhofner
|
|
|
|
|