|
Home > Archive > Voice over IP Cisco > September 2007 > CME voice codec
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| cisco.voip 2007-09-24, 1:12 pm |
| I do not see the codec command on my CME router and I wish to do g729
between phones?
Isn't this where it is supposed to be?
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version
12.4(12), RELEASE SOFTWARE (fc1)
cme uptime is 2 hours, 41 minutes
System returned to ROM by power-on
System image file is "flash:c2800nm-adventerprisek9-mz.124-12.bin"
cme(config-ephone)#?
Ethernet phone configuration commands
after-hour ephone exempt from after-hour blocking
auto-line Automatically select the most appropriate phone line when
the telephone handset is lifted offhook for both incoming
and outgoing calls. The 'no' form of this command
requires
the phone user to always explicitly select the phone line
to
use by pressing the appropriate phone Line button
button Assign ephone-dn phone lines to phone using format with
feature options.
default Set a command to its defaults
description Detail description of the phone
dnd set Do-Not-Disturb options for phone
ephone-template Define ephone-template tag
exit Exit from ephone configuration mode
fastdial Define ip-phone fastdial number
keep-conference Do not disconnect conference when conference initiator
hangs-up.Connect remaining parties together directly
using
call transfer.
keepalive Define keepalive timeout period to unregister IP phone
----- Original Message -----
From: <cisco-voip-request@puck.nether.net>
To: <cisco-voip@puck.nether.net>
Sent: Monday, September 24, 2007 12:00 PM
Subject: cisco-voip Digest, Vol 55, Issue 138
> Send cisco-voip mailing list submissions to
> cisco-voip@puck.nether.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://puck.nether.net/mailman/listinfo/cisco-voip
> or, via email, send a message with subject or body 'help' to
> cisco-voip-request@puck.nether.net
>
> You can reach the person managing the list at
> cisco-voip-owner@puck.nether.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of cisco-voip digest..."
>
>
> Today's Topics:
>
> 1. blocking a number to an analog phone (Kathy Dupree)
> 2. DCOM error ? (Dark Fiber)
> 3. Re: IPCC enterprise data (Matthew Saskin)
> 4. Re: IPCC enterprise data (Johnny Crothers (c))
> 5. SelectCmDevice ccm5 (abate@dei.unipd.it)
> 6. Re: IPCC enterprise data (Matthew Saskin)
> 7. Re: blocking a number to an analog phone (Paul Choi)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 24 Sep 2007 08:34:35 -0400
> From: "Kathy Dupree" <KDupree@randolphcollege.edu>
> Subject: [cisco-voip] blocking a number to an analog phone
> To: <cisco-voip@puck.nether.net>
> Message-ID:
> < 6E497ADB607656479C24E6D7BF6B505A0957A64D
@exchange.randolphcollege.edu>
>
> Content-Type: text/plain; charset="us-ascii"
>
> Annoying calls again. Is there a way to block a certain number to an
> analog phone on a vg248? Call Manager 4.1. Thanks, Kathy
>
>
>
> Katherine O. Dupree
>
> Randolph College
>
> Main 243
>
> Telecommunications Support/Infrastructure Coordinator
>
> kdupree@randolphcollege.edu <mailto:kdupree@rmwc.edu>
>
> (434) 947 8371
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
https://puck.nether.net/pipermail/c...hment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Mon, 24 Sep 2007 08:25:21 -0500
> From: "Dark Fiber" <d4rkf1ber@gmail.com>
> Subject: [cisco-voip] DCOM error ?
> To: cisco-voip@puck.nether.net
> Message-ID:
> < a1b07ea60709240625r3d1295a7r59a649dab133
31dd@mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Getting a bunch of DCOM errors on the publisher, and I have looked up
> various ways in which to resolve it and what the problem might be.
>
> However, one thing I noticed that is kind of odd is that the error
> lists the subscribers name wrong? Notice it has added the "IS~" in
> front of the name.
>
> I found this on Cisco's site:
>
>
http://www.cisco.com/en/US/products...08073f582.shtml
>
> I don't have any of the UDP or IPX protocols listed so thats not the
> problem. The LMHOSTS files are fine but they don't list a name that
> includes "IS~" which makes me think thats the problem. They shouldn't
> list it, it should use the correct name right?
>
> Any thoughts?
>
>
> Event Type: Error
> Event Source: DCOM
> Event Category: None
> Event ID: 10009
> Date: 9/24/2007
> Time: 8:09:39 AM
> User: CCM01\SQLSvc
> Computer: CCM01
> Description:
> DCOM was unable to communicate with the computer IS~CCM02 using any of
> the configured protocols.
>
>
> ------------------------------
>
> Message: 3
> Date: Mon, 24 Sep 2007 10:04:54 -0400
> From: Matthew Saskin <matt@saskin.net>
> Subject: Re: [cisco-voip] IPCC enterprise data
> To: "Johnny Crothers (c)" <Johnny.Crothers@vanco.co.uk>
> Cc: cisco-voip@puck.nether.net
> Message-ID: <46F7C406.8070404@saskin.net>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> Very easy.
>
> In the routing script itself do a database dip based on ANI, take the
> returned value, stuff it into a PeripheralVariable, display said
> peripheral variable in the desktop application (be it CTIOS, CAD,
whatever).
>
> I can elaborate if need be.
>
> -matt
>
> Johnny Crothers (c) wrote:
e-security.support@vanco.info[vbcol=seagreen]
>
>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 24 Sep 2007 15:21:08 +0100
> From: "Johnny Crothers \(c\)" <Johnny.Crothers@vanco.co.uk>
> Subject: Re: [cisco-voip] IPCC enterprise data
> To: "Matthew Saskin" <matt@saskin.net>
> Cc: cisco-voip@puck.nether.net
> Message-ID:
>
< A56BD242744BF540B15D1672E0E3E87501E56B18
@LON-INT-MSGVS01.internal.vancocorp
..com>
>
> Content-Type: text/plain; charset="us-ascii"
>
> Sort of  Although we are using Enhanced, but its given me an idea I
> can use..
>
> I'll just need on how to set enterprise data and then displaying it..
> never done it before!
>
> Thanks Matthew
>
> Cheers,
>
> Johnny
>
> -----Original Message-----
> From: Matthew Saskin [mailto:matt@saskin.net]
> Sent: 24 September 2007 15:05
> To: Johnny Crothers (c)
> Cc: cisco-voip@puck.nether.net
> Subject: Re: [cisco-voip] IPCC enterprise data
>
> Very easy.
>
> In the routing script itself do a database dip based on ANI, take the
> returned value, stuff it into a PeripheralVariable, display said
> peripheral variable in the desktop application (be it CTIOS, CAD,
> whatever).
>
> I can elaborate if need be.
>
> -matt
>
> Johnny Crothers (c) wrote:
> ANI
>
> popup
> not
>
>
> e-security.support@vanco.info
>
>
> ------------------------------------------------------------------------
>
>
>
> ------------------------------
>
> Message: 5
> Date: Mon, 24 Sep 2007 15:47:53 +0200
> From: abate@dei.unipd.it
> Subject: [cisco-voip] SelectCmDevice ccm5
> To: cisco-voip@puck.nether.net
> Message-ID: <20070924154753.o0z0f971ckkckogg@mail.dei.unipd.it>
> Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes";
> format="flowed"
>
> Hi
>
> I use "AXL Serviceability API" and I have some problem on CCM5. I use
> SelectCmDevice.
>
> CCM5 returns ERROR:
> <axl:code>5003</axl:code><axl:message>No Handler found for
> SelectCmDevice</axl:message>
>
> I try the SelectCmDevice-query on CCM4 and CCM4 works fine and result is
> correct.
>
> What I must run/select/stop in CCM5? AXL and SOAP services was started.
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
>
>
> ------------------------------
>
> Message: 6
> Date: Mon, 24 Sep 2007 10:46:05 -0400
> From: Matthew Saskin <matt@saskin.net>
> Subject: Re: [cisco-voip] IPCC enterprise data
> To: "Johnny Crothers (c)" <Johnny.Crothers@vanco.co.uk>
> Cc: cisco-voip@puck.nether.net
> Message-ID: <46F7CDAD.6060609@saskin.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> We both seem to have miscommunicated a bit. I thought you were talking
> about IPCC Enterprise, you were actually talking about "enterprise data"
> within IPCC Express.
>
> General concept is the same, how to do it is a bit different
>
> To pull the data you can either grab it from an XML document (probably
> easiest to have a CGI or similar generate the XML Dynamically) or you
> can pull from database. Once you have the data, you need to use a "Set
> Enterprise Server Data" step *after* you have used a "Select Resource"
> step. You can then specify which enterprise data slot (0, 1, 2, ...)
> you want to populate with the variable you stored the contract name in.
>
> -matt
>
> Johnny Crothers (c) wrote:
>
>
>
> ------------------------------
>
> Message: 7
> Date: Mon, 24 Sep 2007 07:18:43 -0700 (PDT)
> From: Paul Choi <asobihoudai@yahoo.com>
> Subject: Re: [cisco-voip] blocking a number to an analog phone
> To: Kathy Dupree <KDupree@randolphcollege.edu>,
> cisco-voip@puck.nether.net
> Message-ID: <322951.40896.qm@web57214.mail.re3.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> I'd make the same recommendation. If you have the
> caller ID string coming in on your PRI, you can make a
> blocking translation rule on its corresponding voice
> port.
>
> Paul
>
> --- Kathy Dupree <KDupree@randolphcollege.edu> wrote:
>
>
>
>
>
>
________________________________________
____________________________________
________
> Looking for a deal? Find great prices on flights and hotels with Yahoo!
FareChase.
> http://farechase.yahoo.com/
>
>
> ------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> End of cisco-voip Digest, Vol 55, Issue 138
> ****************************************
***
| |
| Paul Choi 2007-09-24, 7:11 pm |
| If you're using a voip dial-peer, the codec is g729 by
default.
Paul
--- "cisco.voip" <cisco.voip@verizon.net> wrote:
> I do not see the codec command on my CME router and
> I wish to do g729
> between phones?
> Isn't this where it is supposed to be?
>
>
> cisco IOS Software, 2800 Software
> (C2800NM-ADVENTERPRISEK9-M), Version
> 12.4(12), RELEASE SOFTWARE (fc1)
> cme uptime is 2 hours, 41 minutes
> System returned to ROM by power-on
> System image file is
> "flash:c2800nm-adventerprisek9-mz.124-12.bin"
>
> cme(config-ephone)#?
> Ethernet phone configuration commands
> after-hour ephone exempt from after-hour
> blocking
> auto-line Automatically select the most
> appropriate phone line when
> the telephone handset is lifted
> offhook for both incoming
> and outgoing calls. The 'no' form
> of this command
> requires
> the phone user to always
> explicitly select the phone line
> to
> use by pressing the appropriate
> phone Line button
> button Assign ephone-dn phone lines to
> phone using format with
> feature options.
> default Set a command to its defaults
> description Detail description of the phone
> dnd set Do-Not-Disturb options for
> phone
> ephone-template Define ephone-template tag
> exit Exit from ephone configuration
> mode
> fastdial Define ip-phone fastdial number
> keep-conference Do not disconnect conference when
> conference initiator
> hangs-up.Connect remaining
> parties together directly
> using
> call transfer.
> keepalive Define keepalive timeout period
> to unregister IP phone
>
>
>
>
> ----- Original Message -----
> From: <cisco-voip-request@puck.nether.net>
> To: <cisco-voip@puck.nether.net>
> Sent: Monday, September 24, 2007 12:00 PM
> Subject: cisco-voip Digest, Vol 55, Issue 138
>
>
> Web, visit
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 'help' to
> is more specific
> Dupree)
> (c))
> (Paul Choi)
>
----------------------------------------------------------------------
> analog phone
>
< 6E497ADB607656479C24E6D7BF6B505A0957A64D
@exchange.randolphcollege.edu>
> certain number to an
> Thanks, Kathy
> Coordinator
> <mailto:kdupree@rmwc.edu>
>
https://puck.nether.net/pipermail/c...hment-0001.html
>
< a1b07ea60709240625r3d1295a7r59a649dab133
31dd@mail.gmail.com>
> and I have looked up
> problem might be.
> is that the error
> added the "IS~" in
>
http://www.cisco.com/en/US/products...08073f582.shtml
> listed so thats not the
> don't list a name that
> problem. They shouldn't
> IS~CCM02 using any of
> <Johnny.Crothers@vanco.co.uk>
> format=flowed
> based on ANI, take the
> PeripheralVariable, display said
> it CTIOS, CAD,
> whatever).
> customer would like the ANI
> in, checks is done (an
> contract name via the popup
>
****************************************
******************************
> the individual and not
> files transmitted with it
> intended recipient. If
> responsible for
> advised that you have
> dissemination, distribution,
> you are concerned with
> e-security.support@vanco.info
> contain software
> system. While the sender
> minimise this risk, we cannot
> sustain as a result of
> virus checks before
> Registered Office: John
> Middlesex TW7 5AX
> this e-mail
>
****************************************
******************************
>
------------------------------------------------------------------------
> https://puck.nether.net/mailman/listinfo/cisco-voip
> <Johnny.Crothers@vanco.co.uk>
>
< A56BD242744BF540B15D1672E0E3E87501E56B18
@LON-INT-MSGVS01.internal.vancocorp
> .com>
> given me an idea I
> then displaying it..
> based on ANI, take the
> PeripheralVariable, display said
> it CTIOS, CAD,
> customer would like the
> in, checks is done (an
> contract name via the
>
****************************************
******************************
> the individual and
> files transmitted with it
> intended recipient. If
> responsible for
> advised that you have
> dissemination, distribution,
> you are concerned with
> contain software
> system. While the sender
> minimise this risk, we cannot
> sustain as a result of
> virus checks before
> Registered Office: John
> Middlesex TW7 5AX
> this e-mail
>
****************************************
******************************
>
------------------------------------------------------------------------
> https://puck.nether.net/mailman/listinfo/cisco-voip
> <20070924154753.o0z0f971ckkckogg@mail.dei.unipd.it>
> DelSp="Yes";
> problem on CCM5. I use
> found for
> works fine and result is
> services was started.
>
----------------------------------------------------------------
> Messaging Program.
> <Johnny.Crothers@vanco.co.uk>
> format=flowed
> thought you were talking
> about "enterprise data"
> different
> XML document (probably
> Dynamically) or you
> you need to use a "Set
> a "Select Resource"
> slot (0, 1, 2, ...)
> the contract name in.
> its given me an idea I
> then displaying it..
> based on ANI, take the
> PeripheralVariable, display said
> (be it CTIOS, CAD,
> customer would like the
> in, checks is done (an
> contract name via the
>
****************************************
******************************
> of the individual and
> files transmitted with it
> intended recipient. If
> person responsible for
> advised that you have
> dissemination, distribution,
> you are concerned with
> may contain software
> system. While the sender
> minimise this risk, we cannot
> sustain as a result of
> virus checks before
> Registered Office: John
> Middlesex TW7 5AX
> this e-mail
>
****************************************
******************************
>
------------------------------------------------------------------------
> https://puck.nether.net/mailman/listinfo/cisco-voip
> analog phone
> <322951.40896.qm@web57214.mail.re3.yahoo.com>
> make a
> voice
> wrote:
> Thanks,
> ________________________________________
_______
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
________________________________________
____________________________________[vbc
ol=seagreen]
> ________
> and hotels with Yahoo!
> FareChase.
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>[/vbcol]
________________________________________
________________________________________
____
Pinpoint customers who are looking for what you sell.
http://searchmarketing.yahoo.com/
|
|
|
|
|