|
Home > Archive > Voice over IP Cisco > September 2007 > Crypto Maps...
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Kevin Dunn 2007-09-24, 7:11 pm |
| A consultant came in this weekend and upgraded our routers...
now we have no crypto maps...in fact the command says "invalid"
is there a place on cisco.com that will show me if this is the right
software for our VPN router?
(Show Vers included)
*** *** ***
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(23), RELEASE SOFTWARE
(fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 24-Jul-07 15:44 by stshen
Image text-base: 0x80008098, data-base: 0x81A4C13C
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
MAR-VPN-CA01INT uptime is 6 weeks, 4 days, 21 hours, 7 minutes
System returned to ROM by reload at 17:45:04 cdt Wed Aug 8 2007
System restarted at 17:48:26 cdt Wed Aug 8 2007
System image file is "flash:c2600-j1s3-mz.123-23.bin"
cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes of
memory.
Processor board ID JAB034002V6 (370411072)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
2 Ethernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
| |
| Matthew Saskin 2007-09-24, 7:11 pm |
| Feature navigator:
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
J1S3-MZ = Enterprise Basic feature set. I'm fairly certain this doesn't
support VPN tunnels, but check the feature navigator to confirm.
-matt
FKevin Dunn wrote:
> A consultant came in this weekend and upgraded our routers...
> now we have no crypto maps...in fact the command says "invalid"
> is there a place on cisco.com <http://cisco.com> that will show me if
> this is the right software for our VPN router?
> (Show Vers included)
>
> *** *** ***
>
> cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(23), RELEASE
> SOFTWARE (fc5)
> Technical Support: http://www.cisco.com/techsupport
> <http://www.cisco.com/techsupport>
> Copyright (c) 1986-2007 by cisco Systems, Inc.
> Compiled Tue 24-Jul-07 15:44 by stshen
> Image text-base: 0x80008098, data-base: 0x81A4C13C
>
> ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>
> MAR-VPN-CA01INT uptime is 6 weeks, 4 days, 21 hours, 7 minutes
> System returned to ROM by reload at 17:45:04 cdt Wed Aug 8 2007
> System restarted at 17:48:26 cdt Wed Aug 8 2007
> System image file is "flash: c2600-j1s3-mz.123-23.bin"
>
> cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes
> of memory.
> Processor board ID JAB034002V6 (370411072)
> M860 processor: part number 0, mask 49
> Bridging software.
> X.25 software, Version 3.0.0.
> TN3270 Emulation software.
> 2 Ethernet/IEEE 802.3 interface(s)
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
>
> ------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Anthony 2007-09-25, 1:11 am |
| Any image that supports cryptography will have K9 in the name.
c2600-j1s3-mz.123-23.bin does not, but this one does
c2600-jk9s-mz.123-23.bin.
Anthony
Kevin Dunn wrote:
> A consultant came in this weekend and upgraded our routers...
> now we have no crypto maps...in fact the command says "invalid"
> is there a place on cisco.com <http://cisco.com> that will show me if
> this is the right software for our VPN router?
> (Show Vers included)
>
> *** *** ***
>
> cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(23), RELEASE
> SOFTWARE (fc5)
> Technical Support: http://www.cisco.com/techsupport
> <http://www.cisco.com/techsupport>
> Copyright (c) 1986-2007 by cisco Systems, Inc.
> Compiled Tue 24-Jul-07 15:44 by stshen
> Image text-base: 0x80008098, data-base: 0x81A4C13C
>
> ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>
> MAR-VPN-CA01INT uptime is 6 weeks, 4 days, 21 hours, 7 minutes
> System returned to ROM by reload at 17:45:04 cdt Wed Aug 8 2007
> System restarted at 17:48:26 cdt Wed Aug 8 2007
> System image file is "flash: c2600-j1s3-mz.123-23.bin"
>
> cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes
> of memory.
> Processor board ID JAB034002V6 (370411072)
> M860 processor: part number 0, mask 49
> Bridging software.
> X.25 software, Version 3.0.0.
> TN3270 Emulation software.
> 2 Ethernet/IEEE 802.3 interface(s)
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
> ------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Ahmed Elnagar 2007-09-26, 1:11 pm |
| You can find a lot of tools that can help you on Cisco.com, like the
software advisor and upgrade planner.
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Anthony
Sent: Tuesday, September 25, 2007 7:52 AM
To: Kevin Dunn
Cc: cisco Voice
Subject: Re: [cisco-voip] Crypto Maps...
Any image that supports cryptography will have K9 in the name.
c2600-j1s3-mz.123-23.bin does not, but this one does
c2600-jk9s-mz.123-23.bin.
Anthony
Kevin Dunn wrote:
> A consultant came in this weekend and upgraded our routers...
> now we have no crypto maps...in fact the command says "invalid"
> is there a place on cisco.com <http://cisco.com> that will show me if
> this is the right software for our VPN router?
> (Show Vers included)
>
> *** *** ***
>
> cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(23), RELEASE
> SOFTWARE (fc5)
> Technical Support: http://www.cisco.com/techsupport
> <http://www.cisco.com/techsupport>
> Copyright (c) 1986-2007 by cisco Systems, Inc.
> Compiled Tue 24-Jul-07 15:44 by stshen
> Image text-base: 0x80008098, data-base: 0x81A4C13C
>
> ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>
> MAR-VPN-CA01INT uptime is 6 weeks, 4 days, 21 hours, 7 minutes
> System returned to ROM by reload at 17:45:04 cdt Wed Aug 8 2007
> System restarted at 17:48:26 cdt Wed Aug 8 2007
> System image file is "flash: c2600-j1s3-mz.123-23.bin"
>
> cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes
> of memory.
> Processor board ID JAB034002V6 (370411072)
> M860 processor: part number 0, mask 49
> Bridging software.
> X.25 software, Version 3.0.0.
> TN3270 Emulation software.
> 2 Ethernet/IEEE 802.3 interface(s)
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
>
------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Chris D'amore 2007-09-26, 1:12 pm |
| When the crypto maps says" invalid", that usually means the access list
referenced in the crypto map doesn't exist.
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Ahmed Elnagar
Sent: Wednesday, September 26, 2007 7:43 AM
To: Anthony; Kevin Dunn
Cc: cisco Voice
Subject: Re: [cisco-voip] Crypto Maps...
You can find a lot of tools that can help you on Cisco.com, like the
software advisor and upgrade planner.
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Anthony
Sent: Tuesday, September 25, 2007 7:52 AM
To: Kevin Dunn
Cc: cisco Voice
Subject: Re: [cisco-voip] Crypto Maps...
Any image that supports cryptography will have K9 in the name.
c2600-j1s3-mz.123-23.bin does not, but this one does
c2600-jk9s-mz.123-23.bin.
Anthony
Kevin Dunn wrote:
> A consultant came in this weekend and upgraded our routers...
> now we have no crypto maps...in fact the command says "invalid"
> is there a place on cisco.com <http://cisco.com> that will show me if
> this is the right software for our VPN router?
> (Show Vers included)
>
> *** *** ***
>
> cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(23), RELEASE
> SOFTWARE (fc5)
> Technical Support: http://www.cisco.com/techsupport
> <http://www.cisco.com/techsupport>
> Copyright (c) 1986-2007 by cisco Systems, Inc.
> Compiled Tue 24-Jul-07 15:44 by stshen
> Image text-base: 0x80008098, data-base: 0x81A4C13C
>
> ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>
> MAR-VPN-CA01INT uptime is 6 weeks, 4 days, 21 hours, 7 minutes
> System returned to ROM by reload at 17:45:04 cdt Wed Aug 8 2007
> System restarted at 17:48:26 cdt Wed Aug 8 2007
> System image file is "flash: c2600-j1s3-mz.123-23.bin"
>
> cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes
> of memory.
> Processor board ID JAB034002V6 (370411072)
> M860 processor: part number 0, mask 49
> Bridging software.
> X.25 software, Version 3.0.0.
> TN3270 Emulation software.
> 2 Ethernet/IEEE 802.3 interface(s)
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
>
------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
NOTICE: This electronic mail message and any files transmitted with it are intended
exclusively for the individual or entity to which it is addressed. The message,
together with any attachment, may contain confidential and/or privileged information.
Any unauthorized review, use, printing, saving, copying, disclosure or distribution
is strictly prohibited. If you have received this message in error, please
immediately advise the sender by reply email and delete all copies.
|
|
|
|
|