Voice over IP Cisco - Phone authentication and auto-registration

Author

Phone authentication and auto-registration

Reto Gassmann

2007-09-25, 1:11 pm

Hello

we have to set up phone authentication on our Cllmanager 4.2(3) Cluster.

In the security guide I read, that auto-registration of the phones will be
disabled if the cluster is configured for mixed mode.
Can I turn on auto-registration after the installation of the authetication or I
am loosing the auto-registration feature?

"Cisco CallManager automatically disables auto-registration if you configure the
cluster-wide security mode for authentication and encryption through the Cisco
CTL client."

Thanks for feedback
Reto

Wes Sisk

2007-09-25, 7:11 pm

autoreg will be disabled until you disable security on the cluster.
security and autoreg are mutually exclusive.

Reto Gassmann wrote:
> Hello
>
> we have to set up phone authentication on our Cllmanager 4.2(3) Cluster.
>
> In the security guide I read, that auto-registration of the phones will be
> disabled if the cluster is configured for mixed mode.
> Can I turn on auto-registration after the installation of the authetication or I
> am loosing the auto-registration feature?
>
> "Cisco CallManager automatically disables auto-registration if you configure the
> cluster-wide security mode for authentication and encryption through the Cisco
> CTL client."
>
> Thanks for feedback
> Reto
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>