|
Home > Archive > Voice Over IP in UK > October 2005 > sipura 3000 1-way audio after firmware upgrade
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
sipura 3000 1-way audio after firmware upgrade
|
|
|
| I just upgraded the firmware of my Sipura SPA-3000 from version 2.0.9 to
version 2.0.13. Everything was working fine, but now I've only got 1-way
audio, i.e. the far end can hear me, but I can't hear the far end
(although when I register Line 1 with Sipdiscount.com, I do hear their
call charge message when dialling out). All the NAT settings seem to be
fine (e.g. NAT mapping enable=yes). I've not changed any network (e.g.
router) settings. I normally have the thing set up to register with
Sipgate UK, but I have tried a couple of others (incl. Sipdiscount and
1899), but to no avail.
I've trawled previous posts about 1-way audio in here and in uk.telecom,
but despite much discussion, no solutions have presented themselves
(other than NAT mapping and STUN server, both of which seem to be
correctly set).
All advice appreciated!
Cheers,
Chris
| |
| Mark Adamson 2005-10-25, 5:45 pm |
|
"Chris" <chris.hopley@gmail.com.z> wrote in message
news:1130193563.19110.0@damia.uk.clara.net...
>I just upgraded the firmware of my Sipura SPA-3000 from version 2.0.9 to
>version 2.0.13. Everything was working fine, but now I've only got 1-way
>audio, i.e. the far end can hear me, but I can't hear the far end (although
>when I register Line 1 with Sipdiscount.com, I do hear their call charge
>message when dialling out). All the NAT settings seem to be fine (e.g. NAT
>mapping enable=yes). I've not changed any network (e.g. router) settings. I
>normally have the thing set up to register with Sipgate UK, but I have
>tried a couple of others (incl. Sipdiscount and 1899), but to no avail.
>
> I've trawled previous posts about 1-way audio in here and in uk.telecom,
> but despite much discussion, no solutions have presented themselves (other
> than NAT mapping and STUN server, both of which seem to be correctly set).
>
> All advice appreciated!
>
> Cheers,
> Chris
How come you haven't upgraded to the firmware version 3? It has worked well
for me
| |
|
| Chris wrote:
> I just upgraded the firmware of my Sipura SPA-3000 from version 2.0.9 to
> version 2.0.13. Everything was working fine, but now I've only got 1-way
> audio, i.e. the far end can hear me, but I can't hear the far end
> (although when I register Line 1 with Sipdiscount.com, I do hear their
> call charge message when dialling out). All the NAT settings seem to be
> fine (e.g. NAT mapping enable=yes). I've not changed any network (e.g.
> router) settings. I normally have the thing set up to register with
> Sipgate UK, but I have tried a couple of others (incl. Sipdiscount and
> 1899), but to no avail.
>
> I've trawled previous posts about 1-way audio in here and in uk.telecom,
> but despite much discussion, no solutions have presented themselves
> (other than NAT mapping and STUN server, both of which seem to be
> correctly set).
>
> All advice appreciated!
Finally sorted it: the problem was a second log-in on a softphone behind
the same router.
|
|
|
|
|