| Author |
Forces FXO not available in menu speedtouch 716g
|
|
| clooster@gmail.com 2005-12-24, 5:48 pm |
| I bought a speedtouch 716g (firmware 5.3.3.5). The VOIP works fine with
sipdiscount.com. For some numbers I want to use PSTN instead of VOIP.
This should be done by *01* and then wait for the dial tone. On the
speedtouch I looked at the 'Telephony services' But I only see the
following services:
Call Hold 94
Call Waiting 43
Call Transfer 96
Conference Call (3 Party)
Calling Line Identification Presentation.
Why don's I get the forced FXO service?
Jeroen.
| |
| paul123 2005-12-24, 8:45 pm |
| clooster@gmail.com wrote:
> I bought a speedtouch 716g (firmware 5.3.3.5).
I'm confused. I also have a 716g and I thought the 5.x.x.x firmware was
for the 716WL -
On the Speedtouch website at: http://www.speedtouch.co.uk/716.asp - it
states:
================================
Latest Version 716G = 1.0d
Latest Version 716WL = 5.3.2.6 UK
Note: Release 5 firmware is not compatible with release 1 hardware.
================================
???
If you have the 716G (and not the 716WL), does this mean that I CAN
upgrade to v 5.x.x firmware? I'm a bit reluctant to try it as most of
the previous firmware updates have entailed a full reconfig of ALL
settings. It's a bit of a drag.
>
> Why don's I get the forced FXO service?
>
Huh? More confused. I think somebody spiked my mince pies....
| |
| clooster@gmail.com 2005-12-26, 7:45 am |
| I have the 716 WL
Jeroen
|
|
|
|