|
Home > Archive > Voice Over IP in UK > March 2006 > Putting outbound call to ISDN2e line on hold rings second ISDN channel
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Putting outbound call to ISDN2e line on hold rings second ISDN channel
|
|
| Linker3000 2006-03-21, 5:46 pm |
| Has anyone else encountered the situation where if you put on hold an
outbound VoIP call that terminates at a phone connected to ISDN2e (via a
simple PBX), the SIP phone (or service provider?) makes a second call to
the destination number?
eg:
I have a SIP phone (Safecom 5000) on my desk, setup with voip.co.uk,
'under test' for a possible roll-out.
My office has a Euracom PBX connected to an ISDN2e service. There are 4
analogue phones in my office area connected to the PBX.
If I call the ISDN line number from the SIP phone, all analogue phones
ring as expected and I can pick up the call using the one on my desk.
If I put the call on hold by pressing the 'hold' button on the SIP
phone, after a few seconds there is another inbound call coming through
the ISDN PBX and all the phones behind me ring. If I pick up one of
these phones, there's no one there.
If I take the call off hold, it's resumed on the first analogue phone.
I have asked voip.co.uk about this and will also post on the Safecom
support site but I am posting here on the 'more the merrier' principle.
Thanks
| |
|
| Linker3000 pretended :
> Has anyone else encountered the situation where if you put on hold an
> outbound VoIP call that terminates at a phone connected to ISDN2e (via a
> simple PBX), the SIP phone (or service provider?) makes a second call to the
> destination number?
>
> eg:
>
> I have a SIP phone (Safecom 5000) on my desk, setup with voip.co.uk, 'under
> test' for a possible roll-out.
>
> My office has a Euracom PBX connected to an ISDN2e service. There are 4
> analogue phones in my office area connected to the PBX.
>
> If I call the ISDN line number from the SIP phone, all analogue phones ring
> as expected and I can pick up the call using the one on my desk.
>
> If I put the call on hold by pressing the 'hold' button on the SIP phone,
> after a few seconds there is another inbound call coming through the ISDN PBX
> and all the phones behind me ring. If I pick up one of these phones, there's
> no one there.
>
> If I take the call off hold, it's resumed on the first analogue phone.
>
> I have asked voip.co.uk about this and will also post on the Safecom support
> site but I am posting here on the 'more the merrier' principle.
>
> Thanks
Does the second call appear in the Call Data Record on the voip.co.uk
site?
|
|
|
|
|