|
Home > Archive > Voice Over IP in UK > June 2006 > SPA3000 Voipbuster on Gateway1
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
SPA3000 Voipbuster on Gateway1
|
|
|
| I've just got my Sipura SPA3000 so getting to grips with as as fast as
I can. I've got Sipgate setup on line 1 which seems to be working fine
for calls in and out. I'm not trying to configure Voipbuster as
gateway 1. My current settings are :
Line 1 tab settings
Gateway 1 : <username>@sip.voipbuster.com
GW1 NAT Mapping Enable: Yes
GW1 Auth ID: <username>
GW1 Password: <password>
Settings seem ok as work on PAP2, switched back to PAP2 and Voipbuster
is working today :-)
The dial plan is set to :
(xx.|*xx.|<#1,:>xx.<:gw1> )
I pick up handset, press #1 and get a constant tone (like
unavailable). Dial a number and dials then beeping. So I've not got
something right yet. Still trying a few settings and googling but any
help would be much appriciated. tia
oh all ports are open as SPA3000 in DMZ.
| |
|
|
Bleh wrote:
> The dial plan is set to :
>
> (xx.|*xx.|<#1,:>xx.<:gw1> )
>
should be <:@gw1> ?
Phil
| |
|
| On 20 Jun 2006 01:32:32 -0700, "PhilT" <newsnet@gmail.com> wrote:
>
>Bleh wrote:
>
>
>should be <:@gw1> ?
>
>Phil
I can't believe I missed that...yes it not works. Thanks
|
|
|
|
|