|
Home > Archive > Voice Over IP in UK > August 2006 > Starter set-up/kit question
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Starter set-up/kit question
|
|
| victor.ward@mail.com 2006-08-23, 7:11 am |
| Hi All,
I'm a newbie to voip who has been lurking and reading for sometime. I
have just moved to a new property and had my broadband (Telewest)
installed Monday. I am eager to get set-up and start using voip. My
details/requirements are thus: There are 2 people in the house both of
whom have mobiles, we have no landline and will be using voip for all
calls. The phone will mainly be used for incoming calls but will also
be used to make UK calls. I have an idea of what kit I need/would like
to buy but would appreciate any suggestions/recommendations. I
currently have a PC and the cable modem. Also any recommendations on
service providers would be great.
Many thanks in advance for your help.
Victor.
| |
| paul123 2006-08-23, 7:11 am |
|
victor.ward@mail.com wrote:
> Hi All,
>
> I'm a newbie to voip who has been lurking and reading for sometime. I
> have just moved to a new property and had my broadband (Telewest)
> installed Monday. I am eager to get set-up and start using voip. My
> details/requirements are thus: There are 2 people in the house both of
> whom have mobiles, we have no landline and will be using voip for all
> calls. The phone will mainly be used for incoming calls but will also
> be used to make UK calls. I have an idea of what kit I need/would like
> to buy but would appreciate any suggestions/recommendations. I
> currently have a PC and the cable modem. Also any recommendations on
> service providers would be great.
>
> Many thanks in advance for your help.
You'll need to get an ethernet router and then a 2 port ATA (analogue
telephone adaptor). A PAP2 ATA (unlocked) could be a contender -
there's plenty on that in this group - or a SPA2002......
| |
| Ivor Jones 2006-08-23, 1:11 pm |
| "paul123" <paul@redy.net> wrote in message
news:1156334828.523241.7090@b28g2000cwb.googlegroups.com
> victor.ward@mail.com wrote:
>
> You'll need to get an ethernet router and then a 2 port
> ATA (analogue telephone adaptor). A PAP2 ATA (unlocked)
> could be a contender - there's plenty on that in this
> group - or a SPA2002......
For providers, there are a host to choose from, www.sipgate.co.uk offer
free UK numbers and free calls to other users, plus there is no monthly
rental. For calls to ordinary numbers, you need to add a minimum of £10
credit, but this never expires (I've still got some on one of my accounts
after over 18 months..!)
Ivor
| |
| victor.ward@mail.com 2006-08-23, 1:11 pm |
|
Ivor Jones wrote:
> "paul123" <paul@redy.net> wrote in message
> news:1156334828.523241.7090@b28g2000cwb.googlegroups.com
>
> For providers, there are a host to choose from, www.sipgate.co.uk offer
> free UK numbers and free calls to other users, plus there is no monthly
> rental. For calls to ordinary numbers, you need to add a minimum of =A310
> credit, but this never expires (I've still got some on one of my accounts
> after over 18 months..!)
>
> Ivor
Thanks for the prompt replies.
I was looking at whatever cheap router I could get (Ebuyer have one for
=A320) as I have no use for it other than the voip. I was also
considering the PAP2 or the SPA1001.
For a provider I was looking at sipgate of maybe voipstunt...
Paul - Can I ask why you suggest a 2 port ATA? If it's because there
are two of us (i.e. needing 2 lines/devices) we would be sharing a
single line. Is there another reason I'd need 2 ports that I'm not
aware of?
Thanks again for your help.
Victor.
| |
| paul123 2006-08-23, 1:11 pm |
|
victor.ward@mail.com wrote:
>
> Paul - Can I ask why you suggest a 2 port ATA? If it's because there
> are two of us (i.e. needing 2 lines/devices) we would be sharing a
> single line. Is there another reason I'd need 2 ports that I'm not
> aware of?
Yes, In case you both want to make a call at the same time. You would,
of course, need 2 handsets (or DECT sets). If not, a one port ATA would
be more "economical".
| |
| Ivor Jones 2006-08-23, 1:11 pm |
| "paul123" <paul@redy.net> wrote in message
news:1156352159.034722.33150@i42g2000cwa.googlegroups.com
> victor.ward@mail.com wrote:
[vbcol=seagreen]
> Yes, In case you both want to make a call at the same
> time. You would, of course, need 2 handsets (or DECT
> sets). If not, a one port ATA would be more "economical".
To put it more directly, 2 ports will effectively give you two independent
lines. A single port device such as the SPA-1001 while it is the same in
that it can accommodate two accounts, each with its own number, only has
one phone socket, so only one line can be in use at once. If you want to
use a DECT cordless phone, a single one is obviously easier than carrying
two about, but if you use wired phones then two independent ones are more
versatile.
Note that if you have a slow uplink (some cable systems only have 128k on
the uplink) then two independent calls will probably not work too well.
256k or higher will not have any problems in this respect IME.
Ivor
| |
| victor.ward@mail.com 2006-08-24, 7:11 am |
|
Ivor Jones wrote:
> "paul123" <paul@redy.net> wrote in message
> news:1156352159.034722.33150@i42g2000cwa.googlegroups.com
>
>
> To put it more directly, 2 ports will effectively give you two independent
> lines. A single port device such as the SPA-1001 while it is the same in
> that it can accommodate two accounts, each with its own number, only has
> one phone socket, so only one line can be in use at once. If you want to
> use a DECT cordless phone, a single one is obviously easier than carrying
> two about, but if you use wired phones then two independent ones are more
> versatile.
>
> Note that if you have a slow uplink (some cable systems only have 128k on
> the uplink) then two independent calls will probably not work too well.
> 256k or higher will not have any problems in this respect IME.
>
> Ivor
Thanks guys - I really appreciate your help on this.
Even though we only need one handset now (we have a DECT) it would be
good to have the option to expand to two handsets in the future if
required. Plus I've read the PAP2 is a little more user friendly for
beginners...
I'll continue lurking until I take delivery and then I'm sure I'll be
back for your expertise!
Thanks again.
Victor
|
|
|
|
|