| Author |
Caller ID with Sipgate
|
|
|
| I have been trying to get caller ID to show on my Panasonic KX-TCD515EM
phone with Sipgate and the Netgear TA612V telephone adapter.
Sipgate say the problem will be with my phone! Which I feel is odd as it
works when connected to the BT line, so I am looking for some help & advice
on this and would be interested to know if others have the caller ID working
with Sipgate and or with the Netgear TA612V before I start trying other
caller ID phones.
Perhaps this is a caller ID standards problem and if so which phone should
work?
Jon
| |
|
| Jon wrote:
> I have been trying to get caller ID to show on my Panasonic KX-TCD515EM
> phone with Sipgate and the Netgear TA612V telephone adapter.
>
> Sipgate say the problem will be with my phone! Which I feel is odd as it
> works when connected to the BT line, so I am looking for some help & advice
> on this and would be interested to know if others have the caller ID working
> with Sipgate and or with the Netgear TA612V before I start trying other
> caller ID phones.
>
> Perhaps this is a caller ID standards problem and if so which phone should
> work?
>
> Jon
>
>
Panasonics are compatible with the caller ID standards used in the UK. I
guess it's something to do with router.
| |
|
|
"BC" <bacillus.cereus@nospam.gmail.com> wrote in message
news:3T2Ji.18336$c_1.12023@text.news.blueyonder.co.uk...
> Jon wrote:
>
> Panasonics are compatible with the caller ID standards used in the UK. I
> guess it's something to do with router
My guess as well as the phone works with BT line, but Sipgate tech support
say the problem will be with my phone and they know I am using the Netgear
TA612V.
Hoping somebody will comment who has used the Netgear TA612V & caller ID as
it could be costly to just start changing phones & routers.
Jon
| |
| TheDragon 2007-09-22, 7:11 am |
|
"Jon" <jmgood40@hotmail.co.uk> wrote in message
news:N33Ji.32594$ka7.19780@newsfe4-gui.ntli.net...
>
> "BC" <bacillus.cereus@nospam.gmail.com> wrote in message
> news:3T2Ji.18336$c_1.12023@text.news.blueyonder.co.uk...
>
> My guess as well as the phone works with BT line, but Sipgate tech support
> say the problem will be with my phone and they know I am using the Netgear
> TA612V.
>
> Hoping somebody will comment who has used the Netgear TA612V & caller ID
> as it could be costly to just start changing phones & routers.
>
> Jon
Is there a setting in the routers VOIP section to check its configured for
UK standard and NOT US.
The UK uses FSK_ETSI standard. Other EU countries use DTMF or Bellcore. It
is strange though, most phones are multi standard. My phillips certainly is.
>
| |
| Gordon Henderson 2007-09-22, 7:11 am |
| In article <3T2Ji.18336$c_1.12023@text.news.blueyonder.co.uk>,
BC <bacillus.cereus@nospam.gmail.com> wrote:
>Jon wrote:
>
>Panasonics are compatible with the caller ID standards used in the UK. I
>guess it's something to do with router.
But does the Netgear TA612V provide UK standard Caller ID?
There are many different standards world-wide (and even in the UK with
the cable companies), alas.
Does the netgear have any way to select which type of Caller ID it
supports?
Or can you use a differenet router and a soft-phone on your PC just to
make sure you do see callerId?
Gordon
| |
|
| Gordon Henderson wrote:
> Or can you use a differenet router and a soft-phone on your PC just to
> make sure you do see callerId?
Sipgate definitely send caller ID.
Tim
| |
| Chris Davies 2007-09-22, 7:11 pm |
| Jon <jmgood40@hotmail.co.uk> wrote:
> [...] would be interested to know if others have the caller ID working
> with Sipgate [...]
My softphone (twinkle) shows CLID via Sipgate. Hope that helps.
Chris
| |
| Ivor Jones 2007-09-22, 7:11 pm |
| "Chris Davies" <chris-usenet@roaima.co.uk> wrote in message
news:eq8gs4xvhe.ln2@news.roaima.co.uk
: : Jon <jmgood40@hotmail.co.uk> wrote:
: : : [...] would be interested to know if others have the
: : : caller ID working with Sipgate [...]
: :
: : My softphone (twinkle) shows CLID via Sipgate. Hope
: : that helps. Chris
So does my el-cheapo Betacom Preview 2 standalone CLID display unit,
connected to a Sipura 2000 on Sipgate.
Ivor
| |
|
|
"Gordon Henderson" <gordon+usenet@drogon.net> wrote in message
news:fd2iic$1ner$1@energise.enta.net...
> In article <3T2Ji.18336$c_1.12023@text.news.blueyonder.co.uk>,
> BC <bacillus.cereus@nospam.gmail.com> wrote:
>
> But does the Netgear TA612V provide UK standard Caller ID?
>
> There are many different standards world-wide (and even in the UK with
> the cable companies), alas.
>
> Does the netgear have any way to select which type of Caller ID it
> supports?
>
> Or can you use a differenet router and a soft-phone on your PC just to
> make sure you do see callerId?
>
> Gordon
I get the felling the problem is the Netgear TA612V which has been setup by
Sipgate as it is using there firmware and has no user setting to play with.
It's odd Sipgate tech support blame the problem on my phone which suggests
they are happy with the Netgear TA612V setup and the caller ID.
Jon
| |
| {{{{{Welcome}}}}} 2007-09-23, 1:11 am |
| Ivor Jones wrote:
> "Chris Davies" <chris-usenet@roaima.co.uk> wrote in message
> news:eq8gs4xvhe.ln2@news.roaima.co.uk
>
> So does my el-cheapo Betacom Preview 2 standalone CLID display unit,
> connected to a Sipura 2000 on Sipgate.
>
> Ivor
Sipgate Caller ID shows on a couple of BT branded phones I have and a couple
of Binatone phones via a PAP2 ATA.
Have set as ETSI FSK with PR (UK) but have tried them with Bellcore NA/China
too, think I tried other versions too, but medication makes me forgot chunks
of memory.
--
Items for sale: http://www.dodgy-dealer.co.uk
http://petitions.pm.gov.uk/MetricNow
http://ec.europa.eu/consumers/dyna/...archives_en.cfm
| |
|
|
"{{{{{Welcome}}}}}" <bhx_spam@trapped__hotmail.co.uk> wrote in message
news:JZiJi.18778$c_1.3847@text.news.blueyonder.co.uk...
> Ivor Jones wrote:
>
>
> Sipgate Caller ID shows on a couple of BT branded phones I have and a
> couple of Binatone phones via a PAP2 ATA.
>
> Have set as ETSI FSK with PR (UK) but have tried them with Bellcore
> NA/China too, think I tried other versions too, but medication makes me
> forgot chunks of memory.
>
>
> --
> Items for sale: http://www.dodgy-dealer.co.uk
> http://petitions.pm.gov.uk/MetricNow
> http://ec.europa.eu/consumers/dyna/...archives_en.cfm
What telephone adapter are you using, is it the Netgear TA612V ?
Jon
| |
| {{{{{Welcome}}}}} 2007-09-23, 1:11 pm |
| Jon wrote:
> "{{{{{Welcome}}}}}" <bhx_spam@trapped__hotmail.co.uk> wrote in message
> news:JZiJi.18778$c_1.3847@text.news.blueyonder.co.uk...
>
> What telephone adapter are you using, is it the Netgear TA612V ?
>
> Jon
No, the Linksys PAP2 ATA mentioned in my post. :-)
| |
|
| Jon wrote:
[vbcol=seagreen]
[vbcol=seagreen]
> I get the felling the problem is the Netgear TA612V which has been setup
> by Sipgate as it is using there firmware and has no user setting to play
> with.
>
> It's odd Sipgate tech support blame the problem on my phone which suggests
> they are happy with the Netgear TA612V setup and the caller ID.
I'm using a Grandstream ATA486 with a Panasonic cordless and Sipgate [via
Asterisk] and CallerID [both name and number] works fine.
--
<http://ale.cx/> (AIM:troffasky) (UnSoEsNpEaTm@ale.cx)
15:06:32 up 5:00, 1 user, load average: 0.13, 0.09, 0.09
09 f9 11 02 9d 74 e3 5b d8 41 56 c5 63 56 88 c0
| |
|
|
"Jon" <jmgood40@hotmail.co.uk> wrote in message
news:YitJi.9169$HW.1123@newsfe3-gui.ntli.net...
>
> "{{{{{Welcome}}}}}" <bhx_spam@trapped__hotmail.co.uk> wrote in message
> news:JZiJi.18778$c_1.3847@text.news.blueyonder.co.uk...
>
> What telephone adapter are you using, is it the Netgear TA612V ?
>
> Jon
>
Sorry just noticed your reference to PAP2 ATA Linksys Analogue Telephone
Adaptor.
Jon
| |
| Chris S 2007-09-28, 1:11 pm |
|
>
> I get the felling the problem is the Netgear TA612V which has been setup
> by Sipgate as it is using there firmware and has no user setting to play
> with.
might not be, my sipgate supplied and configured TA612V passes caller id to
my bt diverse dect phones
| |
|
|
"Chris S" <chris@chris.com> wrote in message
news:46fd1fae$0$3118$9a6e19ea@unlimited.newshosting.com...
>
>
> might not be, my sipgate supplied and configured TA612V passes caller id
> to my bt diverse dect phones
>
That's very interesting as I was not convinced the Netgear TA612V was
designed for caller id.
OK it's time to try to get hold of a bt diverse dect phone to test this
problem, does your phone have a model number?
It's odd it does not work with the Panasonic KX-TCD515EM phone I have.
Jon
| |
| Chris S 2007-10-01, 1:11 pm |
|
>
> That's very interesting as I was not convinced the Netgear TA612V was
> designed for caller id.
>
> OK it's time to try to get hold of a bt diverse dect phone to test this
> problem, does your phone have a model number?
>
> It's odd it does not work with the Panasonic KX-TCD515EM phone I have.
i lied, my phone is a BT Synergy 3100, which works fine, before that i did
have a binatone phone which i had problems with ringing for no apparent
reason, can't remember if the cli worked on that or not
| |
|
| Ok on the BT Synergy 3100 phone. I will look out for one of them.
I found out over the weekend while talking to a friend on the phone Sipgate
gives caller waiting beeps and my phone showed the caller waiting phone
number on the phone!
So the Panasonic KX-TCD515EM caller ID works, but only for the second caller
during the call to the first caller, so I fail to understand why it should
not show all caller ID's.
Anybody have any ideas on this???
Jon
"Chris S" <chris@chris.com> wrote in message
news:4700f351$0$5516$9a6e19ea@unlimited.newshosting.com...
>
>
> i lied, my phone is a BT Synergy 3100, which works fine, before that i did
> have a binatone phone which i had problems with ringing for no apparent
> reason, can't remember if the cli worked on that or not
>
| |
| Thomas Kenyon 2007-10-08, 7:11 am |
| Jon wrote:
> Ok on the BT Synergy 3100 phone. I will look out for one of them.
>
> I found out over the weekend while talking to a friend on the phone Sipgate
> gives caller waiting beeps and my phone showed the caller waiting phone
> number on the phone!
>
Caller waiting beeps and display are generally a function of the ATA.
> So the Panasonic KX-TCD515EM caller ID works, but only for the second caller
> during the call to the first caller, so I fail to understand why it should
> not show all caller ID's.
>
> Anybody have any ideas on this???
Are there any timers in the menu for the ATA for clid identification? (I
can't remember which standard our CLID is, some transmit on ring others
just before ring).
Certainly with line cards they often need to wait till after the first
ring to pass clid.
|
|
|
|