|
Home > Archive > Voice Over IP in UK > November 2007 > Sipgate, PAP2 and answer machine
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Sipgate, PAP2 and answer machine
|
|
| Nitefoll 2007-11-11, 1:11 pm |
| Hi All
Just discovered that when my answer machine picks up a Sipgate call it
isn't registered by my PAP2 adapter therefore I don't hear the answer
machine "Leave a message" ...err message.
Is there any way to fix this?
Any info would be much appreciated.
Nitefoll
Spec:
BT Voyager Quartet 1500 Phone
Linksys PAP2 - Firmware Version: 3.1.22(LS)
VirginMedia 2Mb broadband.
| |
|
| Nitefoll pretended :
> Hi All
>
> Just discovered that when my answer machine picks up a Sipgate call it
> isn't registered by my PAP2 adapter therefore I don't hear the answer
> machine "Leave a message" ...err message.
Bit more detail. Is your answerphone plugged into your PAP2? and your
phone plugged into your answerphone?
>
> Is there any way to fix this?
Probably
> Any info would be much appreciated.
| |
| Nitefoll 2007-11-11, 7:11 pm |
| On Sun, 11 Nov 2007 17:35:56 GMT, Jono <nothanks@blueyonder.invalid> wrote:
>Nitefoll pretended :
>
>Bit more detail. Is your answerphone plugged into your PAP2? and your
>phone plugged into your answerphone?
>
Apologies, my phone is an all in one phone and answer machine unit, it's
plugged into my PAP2. I can make and receive calls no problem, but when
the answer machine picks up it doesn't register with the PAP2.
>
>Probably
>
How would I fix this then?
>
| |
|
|
"Nitefoll" <nitefoll@spamalicious.net> wrote in message
news:uv8ej3l7c77hnji3da9oikfqud8t87of7o@
4ax.com...
> Hi All
>
> Just discovered that when my answer machine picks up a Sipgate call it
> isn't registered by my PAP2 adapter therefore I don't hear the answer
> machine "Leave a message" ...err message.
>
> Is there any way to fix this?
>
> Any info would be much appreciated.
>
> Nitefoll
>
> Spec:
> BT Voyager Quartet 1500 Phone
> Linksys PAP2 - Firmware Version: 3.1.22(LS)
> VirginMedia 2Mb broadband.
Taking a guess, when the TAM answers, as no-one is home, it only loops
the line. When you pick the phone up you short the bell/ringing line and
it may be that is what the ATA detects.
| |
| steveybar 2007-11-11, 7:11 pm |
|
> Apologies, my phone is an all in one phone and answer machine unit, it's
> plugged into my PAP2. I can make and receive calls no problem, but when
> the answer machine picks up it doesn't register with the PAP2.
>
What do you mean by: 'but when the answer machine picks up it doesn't
register with the PAP2'
Can you explain a little more....
| |
| Nitefoll 2007-11-11, 7:11 pm |
| On Sun, 11 Nov 2007 23:09:10 -0000, "steveybar"
<steveybar@NOSPAMyahoo.co.uk> wrote:
>
>
>What do you mean by: 'but when the answer machine picks up it doesn't
>register with the PAP2'
>
>Can you explain a little more....
>
>
If I don't use sipgate or PAP2 and plug my phone with built in answer
machine into a regular phone system i.e. virgin, then after 6 rings without
answering the answer machine kicks in giving the standard "sorry unable to
take your call please leave a message" and allows someone to leave a
message.
When I use the sipgate and PAP2 the phone rings and the answer machine
kicks in after 6 rings but the "sorry unable to blah blah" message is not
heard and the call times out.
It's almost like the PAP2 doesn't know that the answer machine has picked
up the call?
Can I fix this?
| |
| Graham. 2007-11-11, 7:11 pm |
|
"Nitefoll" <nitefoll@spamalicious.net> wrote in message
news:ka4fj3hilergnbs8vbcc6ggnj1iclhdqei@
4ax.com...
> On Sun, 11 Nov 2007 23:09:10 -0000, "steveybar"
> <steveybar@NOSPAMyahoo.co.uk> wrote:
>
>
> If I don't use sipgate or PAP2 and plug my phone with built in answer
> machine into a regular phone system i.e. virgin, then after 6 rings
> without
> answering the answer machine kicks in giving the standard "sorry unable to
> take your call please leave a message" and allows someone to leave a
> message.
>
> When I use the sipgate and PAP2 the phone rings and the answer machine
> kicks in after 6 rings but the "sorry unable to blah blah" message is not
> heard and the call times out.
>
> It's almost like the PAP2 doesn't know that the answer machine has picked
> up the call?
>
> Can I fix this?
If you answer the call by picking up the handset, can you
conduct a two-way conversation?
--
Graham
%Profound_observation%
| |
| steveybar 2007-11-11, 7:11 pm |
|
> If I don't use sipgate or PAP2 and plug my phone with built in answer
> machine into a regular phone system i.e. virgin, then after 6 rings
> without
> answering the answer machine kicks in giving the standard "sorry unable to
> take your call please leave a message" and allows someone to leave a
> message.
>
> When I use the sipgate and PAP2 the phone rings and the answer machine
> kicks in after 6 rings but the "sorry unable to blah blah" message is not
> heard and the call times out.
>
> It's almost like the PAP2 doesn't know that the answer machine has picked
> up the call?
>
> Can I fix this?
>
It looks as though the PAP2 is timing out at less than the 6 rings needed to
'trip' the answering machine
Don't have your answering machine switched on, and arrange for an incoming
call to come in but don't answer it. How many rings does it call before it
stops/times out?
| |
| Nitefoll 2007-11-12, 1:11 am |
| On Mon, 12 Nov 2007 00:52:07 -0000, "Graham." <me@privacy.com> wrote:
>
>
>"Nitefoll" <nitefoll@spamalicious.net> wrote in message
> news:ka4fj3hilergnbs8vbcc6ggnj1iclhdqei@
4ax.com...
>
>
>If you answer the call by picking up the handset, can you
>conduct a two-way conversation?
Yes that works fine
| |
| Nitefoll 2007-11-12, 1:11 am |
| On Mon, 12 Nov 2007 00:55:47 -0000, "steveybar"
<steveybar@NOSPAMyahoo.co.uk> wrote:
>
>
>It looks as though the PAP2 is timing out at less than the 6 rings needed to
>'trip' the answering machine
>
>Don't have your answering machine switched on, and arrange for an incoming
>call to come in but don't answer it. How many rings does it call before it
>stops/times out?
>
>
I had a similar thought and I've tried that.
The PAP2 is configured to ring for 60 seconds before stopping/timing out.
6 rings is roughly 15-20 seconds, so the answer machine would kick in long
before the call stops/times out.
| |
| steveybar 2007-11-12, 7:11 pm |
| Is the PAP2 a UK version or Hong Kong or US or...
The reason I ask is because it will help identify the Ring1 cadence variant.
If the Ring1 cadence settings are Non UK but the Answering Machine is UK -
then maybe.........
| |
| Nitefoll 2007-11-13, 1:11 am |
| On Mon, 12 Nov 2007 20:43:08 -0000, "steveybar"
<steveybar@NOSPAMyahoo.co.uk> wrote:
>Is the PAP2 a UK version or Hong Kong or US or...
>
>The reason I ask is because it will help identify the Ring1 cadence variant.
>If the Ring1 cadence settings are Non UK but the Answering Machine is UK -
>then maybe.........
>
>
It came from Hong Kong, the Ring 1 cadence is currently set to:
60(.4/.2,.4/2)
| |
| steveybar 2007-11-13, 7:11 am |
|
> It came from Hong Kong, the Ring 1 cadence is currently set to:
>
> 60(.4/.2,.4/2)
That is the 'suggested' UK setting, so presumably you have changed that, and
maybe others from their original HK or US settings. Maybe changing other
settings, has caused your problem......
Did you get your UK settings from a good/proven source....? For example,
what is your FXS Port Impedance set at?
Time for a system reset maybe... and start again.
| |
| Nitefoll 2007-11-13, 7:11 pm |
| On Tue, 13 Nov 2007 10:06:22 -0000, "steveybar"
<steveybar@NOSPAMyahoo.co.uk> wrote:
>
>
>That is the 'suggested' UK setting, so presumably you have changed that, and
>maybe others from their original HK or US settings. Maybe changing other
>settings, has caused your problem......
>
>Did you get your UK settings from a good/proven source....? For example,
>what is your FXS Port Impedance set at?
>
I got the settings from www.wirelessforums.org and the FXS is set to:
370+620||310nF
>Time for a system reset maybe... and start again.
>
Tried that too  I hate being defied by technology
| |
|
| On Tue, 13 Nov 2007 21:47:29 GMT, Nitefoll <nitefoll@spamalicious.net> wrote:
>On Tue, 13 Nov 2007 10:06:22 -0000, "steveybar"
><steveybar@NOSPAMyahoo.co.uk> wrote:
>I got the settings from www.wirelessforums.org and the FXS is set to:
>
>370+620||310nF
>
>
>
>Tried that too I hate being defied by technology
Not sure if this will help at all, but my Tesco IPA1000 couldn't make any
of my phones ring at all. A non-obvious workaround I found that worked
every time I tried it, was to plug a spare ADSL filter into the IPA's
phone socket port, and plug the phone into the filter.
--
-- Michael "Soruk" McConnell Eridani Star System
MailStripper - http://www.MailStripper.eu/ - SMTP spam filter
Mail Me Anywhere - http://www.MailMeAnywhere.com/ - Mobile email
Second Number - http://secondnumber.matrixnetwork.co.uk/
|
|
|
|
|