|
Home > Archive > Voice Over IP in UK > September 2007 > Q: Busy tone Linksys SPA-3102
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Q: Busy tone Linksys SPA-3102
|
|
|
| (For Dutch: see below)
Hi all,
Is there a way I can configure the Linksys SPA-3102 so when somebody
tries to contact me while I'm having a conversation over VoIP, (s)he
gets a busy tone? Now it just looks like I'm able to pick up the phone.
Any suggestions?
TIA,
Sinna
---
Hallo iedereen,
Is er een manier waarop ik de Linksys SPA-3102 kan configureren zodat er
een bezettoon klinkt wanneer iemand mij probeert te bereiken terwijl ik
zelf een gesprek over VoIP aan het voeren ben? Nu gaat de telefoon
gewoon over terwijl ik ze niet kan opnemen.
Suggesties?
Alvast bedankt,
Sinna
| |
| Andrew Gabriel 2007-09-05, 7:11 am |
| In article <5k71upF2e1k0U1@mid.individual.net>,
Sinna <news4sinna_NOSPAM@hotpop.com> writes:
> Hi all,
>
> Is there a way I can configure the Linksys SPA-3102 so when somebody
> tries to contact me while I'm having a conversation over VoIP, (s)he
> gets a busy tone? Now it just looks like I'm able to pick up the phone.
>
> Any suggestions?
I don't believe this is possible on the SPA-3000.
It would require that the VoIP in the FXS port could signal the FXO
port to busy-out (go off-hook without dialling). There is no SIP
message to request a busy-out (although with both VoIP adaptors being
in the same unit, it could use a non-SIP way of signalling this inside
the SPA-3000/3102).
--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]
|
|
|
|
|