|
Home > Archive > Voice Over IP in UK > September 2007 > ZAP channel ringing on...
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
ZAP channel ringing on...
|
|
| gill bates 2007-09-29, 7:11 pm |
| You guys were so helpful yesterday that I am back for more!
I have a basic Asterisk installation, 10 x 9133i with a Sangoma A200D with 1
(Dual) FXO module and HW Echo Cancellation.
If I call the BT line (let's say on my mobile) wait for the phones to ring,
then hangup my mobile the phones continue to ring for at least 30 seconds,
then voicemail kicks in and only when voicemail detects silence does the
line get hung up.
I believe it is a zapata.conf setting but not sure.
Any ideas?
| |
| Gordon Henderson 2007-09-29, 7:11 pm |
| In article <-8qdnYusLLKQBWPb4p2dnAA@bt.com>,
gill bates <gillbates@xyz.com> wrote:
>You guys were so helpful yesterday that I am back for more!
>
>I have a basic Asterisk installation, 10 x 9133i with a Sangoma A200D with 1
>(Dual) FXO module and HW Echo Cancellation.
>
>If I call the BT line (let's say on my mobile) wait for the phones to ring,
>then hangup my mobile the phones continue to ring for at least 30 seconds,
>then voicemail kicks in and only when voicemail detects silence does the
>line get hung up.
>
>I believe it is a zapata.conf setting but not sure.
>
>Any ideas?
Check
http://www.voip-info.org/wiki/index...ect+Supervision
right down at the bottom of the page...
Gordon
|
|
|
|
|