|
Home > Archive > Voice Over IP in UK > January 2008 > ASTERISK@HOME 2.7 AND VOIPBUSTER SETUP
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
ASTERISK@HOME 2.7 AND VOIPBUSTER SETUP
|
|
| phpguy 2007-12-30, 7:11 pm |
| i got an asterisk@home 2.7 box setup with zap and voipbuster
the zap works and i set it up to dial using my landline and fxo card
when i dial 99= something it ommits the 99 and dials the rest
i want to set up the voipbuster trunk to do the same with 88 but for
some reason it wotn connect
i used the default settings im behiond a router and i put nat to yes
but nothing
what do i need to do ? all my phones are sip phones linksys spa 921
i can see from the flash panel its going through to trunk but nothing
happens then times out, i cant hear anytihng
i setted up asterisk as sip trunk not iax2
thanks in advance
OUTGOING SETTINGS
host=194.120.0.198
nat=1
secret=XXXXXX
type=peer
username=XXXXXXXX
//////////////////////////////////
INCOMING SETTINGS
context=from-pstn
secret=XXXXXXXXXXXXXXX
type=user
/////////////////////////////
REGISTRATION
XXXXX:XXXXXXXXXX@194.120.0.198
////////////////////////////////
SIP.CONF
; Note: If your SIP devices are behind a NAT and your Asterisk
; server isn't, try adding "nat=1" to each peer definition to
; solve translation problems.
[general]
port = 5060 ; Port to bind to (SIP is 5060)
bindaddr = 192.168.100.69 ; Address to bind to (all addresses on
machine)
disallow=all
allow=ulaw
allow=alaw
context = from-sip-external ; Send unknown SIP callers to this context
callerid = Unknown
#include sip_nat.conf
#include sip_custom.conf
#include sip_additional.conf
//////////////////////////////////////
| |
| voiptalker@gmail.com 2007-12-31, 7:11 am |
| On 30 Dec, 21:02, phpguy <ksma...@hotmail.com> wrote:
> i got an asterisk@home 2.7 box setup with zap and voipbuster
>
> the zap works and i set it up to dial using my landline and fxo card
> when i dial 99= something it ommits the 99 and dials the rest
>
> i want to set up the voipbuster trunk to do the same with 88 but for
> some reason it wotn connect
I'm assuming you've set the dial rules in *both* the trunk *and* the
corresponding outbound route.
my settings in AAH2.7 were as follows:
SIP TRUNK: Voipbuster
/////////////////////////////////
Outgoing dial rules: (for UK + International - Note my UK outbound
route was 0|[1278]XXXXXXXXX and 0044|.)
0044+1XXXXXXXXX
0044+2XXXXXXXXX
0044+7XXXXXXXXX
0044+8XXXXXXXXX
00.
/////////////////////////////////
Outgoing Settings
/////////////////////////////////
Trunk name: voipbuster
----------------------
Peer Details:
allow=ulaw&alaw
canreinvite=yes
disallow=all
fromdomain=voipbuster.com
fromuser=USERNAME
host=sip.voipbuster.com
insecure=very
nat=yes
qualify=1000
secret=PASSWORD
srvlookup=yes
type=friend
username=USERNAME
///////////////////////////////////
Incoming details:
USER details: empty
///////////////////////////////////
Register string:
USERNAME:PASSWORD@sip.voipbuster.com
//////////////////////////////////////
If you have a voip-in number, this would look a little different - but
that's another issue.
Also, if you have more than 2 voipbuster accounts on your AAH box,
you'll need to delete the line: qualify=1000
| |
| Hongtian 2007-12-31, 7:11 am |
| On 31 Dec, 04:02, phpguy <ksma...@hotmail.com> wrote:
> i got an asterisk@home 2.7 box setup with zap and voipbuster
>
> the zap works and i set it up to dial using my landline and fxo card
> when i dial 99= something it ommits the 99 and dials the rest
>
> i want to set up the voipbuster trunk to do the same with 88 but for
> some reason it wotn connect
>
> i used the default settings im behiond a router and i put nat to yes
> but nothing
>
> what do i need to do ? all my phones are sip phones linksys spa 921
>
> i can see from the flash panel its going through to trunk but nothing
> happens then times out, i cant hear anytihng
>
> i setted up asterisk as sip trunk not iax2
>
> thanks in advance
>
> OUTGOING SETTINGS
>
> host=194.120.0.198
> nat=1
> secret=XXXXXX
> type=peer
> username=XXXXXXXX
>
> //////////////////////////////////
>
> INCOMING SETTINGS
>
> context=from-pstn
> secret=XXXXXXXXXXXXXXX
> type=user
>
> /////////////////////////////
>
> REGISTRATION
>
> XXXXX:XXXXXXX...@194.120.0.198
>
> ////////////////////////////////
>
> SIP.CONF
>
> ; Note: If your SIP devices are behind a NAT and your Asterisk
> ; server isn't, try adding "nat=1" to each peer definition to
> ; solve translation problems.
>
> [general]
> port = 5060 ; Port to bind to (SIP is 5060)
> bindaddr = 192.168.100.69 ; Address to bind to (all addresses on
> machine)
> disallow=all
> allow=ulaw
> allow=alaw
> context = from-sip-external ; Send unknown SIP callers to this context
> callerid = Unknown
>
> #include sip_nat.conf
> #include sip_custom.conf
> #include sip_additional.conf
>
> //////////////////////////////////////
It is terrible. I would like to suggest you try miniSipServer. It is
very easy to use.
| |
|
| Hongtian pretended :
> It is terrible. I would like to suggest you try miniSipServer. It is
> very easy to use.
Not that I can comment on miniSipServer, however, AAH 2.7 is far from
terrible.
I have been using that version since it came out....until yesterday.
The OP could & should consider using PBX-in-a-Flash (which I set up
yesterday)
<http://nerdvittles.com/index.php?p=196>
<http://www.pbxinaflash.org/index.htm>
| |
| voiptalker@gmail.com 2007-12-31, 1:11 pm |
| On Dec 31, 12:28=A0pm, Jono <notha...@blueyonder.invalid> wrote:
> Hongtian pretended :
>
>
> Not that I can comment on miniSipServer, however, AAH 2.7 is far from
> terrible.
Agreed.
> I have been using that version since it came out....until yesterday.
>
> The OP could & should consider using PBX-in-a-Flash (which I set up
> yesterday)
>
> <http://nerdvittles.com/index.php?p=3D196>
>
> <http://www.pbxinaflash.org/index.htm>
And those settings above also work in PBX-in-a-Flash B-)
| |
| phpguy 2008-01-03, 1:11 pm |
| hello there i tried that but it says all circuits are busy now and
voipbuster truck is greyed out in the flash operator panel, any idea
why this happens ? cheers
On 31 Dec 2007, 11:18, voiptal...@gmail.com wrote:
> On 30 Dec, 21:02, phpguy <ksma...@hotmail.com> wrote:
>
>
>
>
> I'm assuming you've set the dial rules in *both* the trunk *and* the
> corresponding outbound route.
>
> my settings in AAH2.7 were as follows:
>
> SIP TRUNK: Voipbuster
> /////////////////////////////////
> Outgoing dial rules: (for UK + International - Note my UK outbound
> route was 0|[1278]XXXXXXXXX and 0044|.)
>
> 0044+1XXXXXXXXX
> 0044+2XXXXXXXXX
> 0044+7XXXXXXXXX
> 0044+8XXXXXXXXX
> 00.
> /////////////////////////////////
> Outgoing Settings
> /////////////////////////////////
> Trunk name: voipbuster
> ----------------------
> Peer Details:
> allow=ulaw&alaw
> canreinvite=yes
> disallow=all
> fromdomain=voipbuster.com
> fromuser=USERNAME
> host=sip.voipbuster.com
> insecure=very
> nat=yes
> qualify=1000
> secret=PASSWORD
> srvlookup=yes
> type=friend
> username=USERNAME
>
> ///////////////////////////////////
> Incoming details:
> USER details: empty
>
> ///////////////////////////////////
> Register string:
>
> USERNAME:PASSW...@sip.voipbuster.com
>
> //////////////////////////////////////
> If you have a voip-in number, this would look a little different - but
> that's another issue.
> Also, if you have more than 2 voipbuster accounts on your AAH box,
> you'll need to delete the line: qualify=1000
|
|
|
|
|