Unity 4.0(4)->4.0(5)

I'm about to do the same.  One thing I'm curious about is their pickyness
about "Replacing Disks in a RAID" -- p. 50 in the Release Notes for 4.0(5).
The Release Notes say "...Unity supports only replacing a defective disk in
a RAID with a blank disk to repair the RAID.  Replacing disks in a RAID for
any other reason is not supported."

I've always treated Unity like a CallManager, and pulled a RAID drive prior
to upgrade, upgraded with the RAID inactive, then replaced the drive after
the upgrade with the previous upgrade's pulled drive.  It's always worked
OK.  I wonder why Unity would care, or even know about, what's going on at
the RAID array level -- all it sees is the logical drive, I would think --
and why they insist on a blank drive.  The Array Manager sure doesn't care
what's on the drive when it rebuilds the array.  Am I missing something?

Mike Armstrong
UF/IFAS CREC
Lake Alfred, FL

----- Original Message -----
From: <cisco-voip-request@puck.nether.net>
To: <cisco-voip@puck.nether.net>
Sent: Friday, June 24, 2005 10:13 AM
Subject: cisco-voip Digest, Vol 28, Issue 98

> Send cisco-voip mailing list submissions to
> cisco-voip@puck.nether.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://puck.nether.net/mailman/listinfo/cisco-voip
> or, via email, send a message with subject or body 'help' to
> cisco-voip-request@puck.nether.net
>
> You can reach the person managing the list at
> cisco-voip-owner@puck.nether.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of cisco-voip digest..."
>
>
> Today's Topics:
>
>   1. Unity 5.0 (Ortiz, Carlos)
>   2. CDR_log Transaction Files (George Dormishev)
>   3. Unity Migration (Rubottom, Karl)
>   4. Re: Dual NIC config? (Ryan Ratliff)
>   5. Re: Unity Migration (Andrew Dignan)
>   6. Re: CDR_log Transaction Files (Ryan Ratliff)
>   7. RE: Unity 5.0 (Voll, Scott)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 24 Jun 2005 08:10:36 -0400
> From: "Ortiz, Carlos" <CORTIZ@broward.org>
> Subject: [cisco-voip] Unity 5.0
> To: <cisco-voip@puck.nether.net>
> Message-ID:
> < 26B357EF9FB7D04A989C9E82A9E5436EF28475@M
REXVS01.bc.broward.cty>
> Content-Type: text/plain; charset="us-ascii"
>
> I am running Windows 2003 server and Exchange 2003 SP1.  I would like to
> upgrade to 4.05.  Anyone running this setup yet?  Any advice or gotchas
> to look out for?
>
>
>
>
>
> Carlos
>
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> https://puck.nether.net/pipermail/c...hment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Fri, 24 Jun 2005 16:36:34 +0300
> From: George Dormishev <gdorm@is-bg.net>
> Subject: [cisco-voip] CDR_log Transaction Files
> To: cisco-voip@puck.nether.net
> Message-ID: <200506241636.35566.gdorm@is-bg.net>
> Content-Type: text/plain;  charset="us-ascii"
>
> Hi all,
> How can i clear the transactional file of the CDR when it grows large? Or
> make a now one?
>
> Thanks in advice!
>
> /George
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 24 Jun 2005 07:40:35 -0600
> From: "Rubottom, Karl" <karlr@SHERIDAN.EDU>
> Subject: [cisco-voip] Unity Migration
> To: <cisco-voip@puck.nether.net>
> Message-ID:
> < 29365246B78D08469DE4B49D32BCB10E0137BFA2
@scmail2.SHERIDAN.EDU>
> Content-Type: text/plain; charset="us-ascii"
>
> We have two Unity servers connected using digital networking.  We have
> already migrated all the users to one Unity server.  What steps do I
> need to take to remove the digital networking, and remove that Unity
> server?
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> https://puck.nether.net/pipermail/c...hment-0001.html
>
> ------------------------------
>
> Message: 4
> Date: Fri, 24 Jun 2005 10:02:30 -0400
> From: Ryan Ratliff <rratliff@cisco.com>
> Subject: Re: [cisco-voip] Dual NIC config?
> To: "Darren Ward" <dward@pla.net.au>
> Cc: cisco-voip@puck.nether.net
> Message-ID: <0012acfe0aa04ce1873884c9cf9a9744@cisco.com>
> Content-Type: text/plain; charset=WINDOWS-1252; delsp=yes;
> format=flowed
>
> Note that cisco only supports the HP teaming drivers currently, and
> make sure to follow the instructions at
> http://www.cisco.com/en/US/products/hw/voiceapp/ps378/
> prod_installation_guide09186a0080203ebc.html to the letter (ie don't
> choose Load Balancing).
>
> The IBM teaming drivers may work perfectly for you, but if you have any
> issues related to network connectivity disable them and see if the
> issue persists before engaging TAC.
>
> Make sure that at no time your CM server has multiple IP addresses.
> This is bad, 100% not supported and guaranteed to cause issues.
>
> -Ryan
> On Jun 24, 2005, at 4:44 AM, Darren Ward wrote:
>
>
> If you use the HP servers then the HA drivers are on the CD already.
> ?
> If you use the IBM servers then you'll need to load the device drivers
> after the OS is loaded.
> ?
> You have to be careful too when doing OS upgrades to reinstall the
> driver just to be safe ;)
> ?
> Worked well for me though and I ran? a couple of IBM x345's without
> problem at all, at least no problem with the ethernet level ;)
> ?
> Usual stuff, make sure spanning-tree is running on the two switches
> facing the server as the driver uses it.
> ?
> Darren
>
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Watson Chris 
D
> CIV MNC-I 54th SIG BDE Network Engineer
> Sent: Friday, 24 June 2005 6:11 PM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] Dual NIC config?
>
> Greetings All From Iraq!
> ?
> I need to set up a CCM with dual NICs and wanted to get everyone's
> input on the best practices for doing so. ?I am also sifting through
> Cisco?s site but nothing (so far) seems to bear upon using dual NICs.
> ?
> Best Regards,
> ?
> Chris Watson, CCNP
> Network Engineer ? VOIP
> MNC-I C6 CIS
> DSN 318-822-3441
> IraQna 0790 220 8435
> ? ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Fri, 24 Jun 2005 09:07:23 -0500 (CDT)
> From: "Andrew Dignan" <andy@dignans.com>
> Subject: Re: [cisco-voip] Unity Migration
> To: cisco-voip@puck.nether.net
> Message-ID: <1530.68.72.173.135.1119622043.squirrel@www.dignans.com>
> Content-Type: text/plain;charset=iso-8859-1
>
> Now that all of your users are migrated over to the new Unity server you
> can run the Unity Uninstall on your old server:
>
> http://www.ciscounitytools.com/App_UninstallUnity30.htm
>
> It will remove unity attributes ONLY from any users still associated with
> that server.  Once you do that you can remove the server from the domain
> and your all set.
>
> Andy
> 
>
>
>
> ------------------------------
>
> Message: 6
> Date: Fri, 24 Jun 2005 10:09:56 -0400
> From: Ryan Ratliff <rratliff@cisco.com>
> Subject: Re: [cisco-voip] CDR_log Transaction Files
> To: George Dormishev <gdorm@is-bg.net>
> Cc: cisco-voip@puck.nether.net
> Message-ID: <ee0fdd52387c2a54e576fa4421427d8a@cisco.com>
> Content-Type: text/plain; charset=US-ASCII; format=flowed
>
> First of all set up BARS or STI backup as it will automatically clear
> out the transaction logs each night for any database you choose to
> backup.
>
> If the transaction log is already empty, you can recover space by
> right-clicking on the CDR database and choosing "Shrink Database".
> If you need to clear out the transaction log before shrinking do the
> following from a command prompt:
>
> osql -E
> use <database>
> go
> backup log <database> with no_log
> go
> dbcc shrinkdatabase <database>
> go
>
> where <database> is the name of the database you need to clear out and
> shrink.  In your case it will be CDR.
>
> -Ryan
> On Jun 24, 2005, at 9:36 AM, George Dormishev wrote:
>
> Hi all,
> How can i clear the transactional file of the CDR when it grows large?
> Or
> make a now one?
>
> Thanks in advice!
>
> /George
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> ------------------------------
>
> Message: 7
> Date: Fri, 24 Jun 2005 07:16:04 -0700
> From: "Voll, Scott" <Scott.Voll@wesd.org>
> Subject: RE: [cisco-voip] Unity 5.0
> To: "Ortiz, Carlos" <CORTIZ@broward.org>, <cisco-voip@puck.nether.net>
> Message-ID: < D713462ED535184D830F6F6301753E7E0145155E
@VISHNU.wesd.org>
> Content-Type: text/plain; charset="us-ascii"
>
> I just finished a 4.0.4 to 4.0.5 upgrade.  MAKE SURE YOU HAVE EVERYTHING
> YOU
> NEED.  I had a two hour window to install and it took me three.  I didn't
> have all the CD's needed so I had to download and unzip which added about
> an
> hour to an hour and a half to the install.
>
>
>
> You need cd 1 and 3 for the Service Packs at
> http://www.cisco.com/cgi-bin/tablebuild.pl/unity-40
>
>
>
> And a minimum of CD 1 and 3 from
> http://www.cisco.com/cgi-bin/Softwa...uild.pl/4yutni0
> more
> if you're adding things like second languages.
>
>
>
> I ended up needing CD 15 also.
>
>
>
> I hated that several times the installer failed to respond ("not
> responding").  But eventually it continued.
>
>
>
> Looks like I'm back up and running.
>
>
>
> Just my two cents.
>
>
>
> Scott
>
>
>
>
>
>
>
>
>
>  _____
>
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Ortiz, Carlos
> Sent: Friday, June 24, 2005 5:11 AM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] Unity 5.0
>
>
>
> I am running Windows 2003 server and Exchange 2003 SP1.  I would like to
> upgrade to 4.05.  Anyone running this setup yet?  Any advice or gotchas to
> look out for?
>
>
>
>
>
> Carlos
>
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> https://puck.nether.net/pipermail/c... />
hment.html
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: smime.p7s
> Type: application/x-pkcs7-signature
> Size: 3291 bytes
> Desc: not available
> Url :
> https://puck.nether.net/pipermail/c...ime
.bin
>
> ------------------------------
>
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> End of cisco-voip Digest, Vol 28, Issue 98
>  ****************************************
**