Hi all,

hows this for a question :o)

I work for a company that has purchased a 3005 concentrator and wants to
roll out cheap VPN routers to it's home workers rather than the expensive
Cisco 83x range. So I was wondering if :

A) Has anyone setup a VPN tunnel between the two?

B) If so how do I do it please.

Thanks

[ Post a follow-up to this message ]

Ginger,

You may wish to investigate the D-Link DI-804HV Web Configurator for
VPN:

http://support.dlink.com/emulators/di804hv/

as well as DI-804HV Support Documentation:

http://support.dlink.com/products/v...ctid=DI%2D804HV

Sincerely,

Brad Reese
BradReese.Com cisco Repair Service Experts
1293 Hendersonville Road, Suite 17
Asheville, North Carolina USA 28803
U.S. Toll Free: 877-549-2680
International: 828-277-7272
Website:   http://www.bradreese.com/cisco-big-iron-repair.htm

[ Post a follow-up to this message ]

"www.BradReese.Com" <Reese@BradReese.Com> wrote in message
news:1121905191.320678.41760@g14g2000cwa.googlegroups.com...
> Ginger,
>
> You may wish to investigate the D-Link DI-804HV Web Configurator for
> VPN:
>
> http://support.dlink.com/emulators/di804hv/
>
> as well as DI-804HV Support Documentation:
>
> http://support.dlink.com/products/v...ctid=DI%2D804HV
>
> Sincerely,
>
> Brad Reese
> BradReese.Com cisco Repair Service Experts
> 1293 Hendersonville Road, Suite 17
> Asheville, North Carolina USA 28803
> U.S. Toll Free: 877-549-2680
> International: 828-277-7272
> Website:   http://www.bradreese.com/cisco-big-iron-repair.htm
>

Hi Brad,

thanks for this advice but I must be a thickie cos I couldn't get the 804HV
to connect to the 3000 Concentrator 

Any other pointers?

Thanks

[ Post a follow-up to this message ]

Ginger wrote:
> "www.BradReese.Com" <Reese@BradReese.Com> wrote in message
> news:1121905191.320678.41760@g14g2000cwa.googlegroups.com...
> 
>
>
> Hi Brad,
>
> thanks for this advice but I must be a thickie cos I couldn't get the 804H
V
> to connect to the 3000 Concentrator 
>
> Any other pointers?
>
> Thanks
>
>
What have you tried so far?  Have you defined the Dlink as a remote peer
and correctly configured the IPSEC parameters on both ends?  I am not
familiar with a Dlink but a Site to Site vpn should not be that big of a
challenge to get going. Copy and paste the Dlink configuration and we
can most likely guide you in the right direction on the cisco VPN 3005.

[ Post a follow-up to this message ]

You may want to contact your local cisco TAC phone number:

http://www.bradreese.com/cisco-tac-...s-worldwide.htm

Sincerely,

Brad Reese
BradReese.Com cisco Repair Service Experts
http://www.bradreese.com/index.htm#EXPERTS
1293 Hendersonville Road, Suite 17
Asheville, North Carolina USA 28803
USA/Canada: 877-549-2680
International: 828-277-7272
United Kingdom: 44-20-70784294

[ Post a follow-up to this message ]