Hello,
 
I'm deploying an IPCC solution. I have installed the Supervisor software and
 when in starts it displays an error because it cannot reach the VOIP monito
r server. I haven't installed this service because I'm not going to use it, 
but I don't want this warning message to appear each time the Supervisor sel
ects his team.
Anybody knows if it is possible to say the supervisor somewhere to not searc
h the voip monitor server?
Should I re-run the install setup to install this service?
The availability of this service depends on the type of license?
 
Thanks,
 
Ruben

-----Mensaje original----- 
De: Brad Vonarx [mailto:brad.vonarx@voipintegration.com] 
Enviado el: mar 02/08/2005 16:11 
Para: Walenta, Phil; Ruben Montes; Ahmad Cheikh Moussa; cisco-voip@puck.neth
er.net 
CC: 
Asunto: RE: [cisco-voip] Using Expansion Modules
	
	

Actually it is possible with some bulky configuration....
	
Configure the button as a shared line apperance in the same partition (this 
will give you the monitor side of it)
	
The calling feature is done using PLAR.
	
Lets say you want the first button to monitor/call extn 1500
	
Create a partition lets call it 1500_PLAR_PT
Create a Calling Search Space 1500_PLAR_CSS and add only the 1500_PLAR_PT to
 it
Create a translation pattern with the pattern empty, partition 1500_PLAR_PT 
and calling search space what would be required to dial 1500 from a normal l
ine.
Then enter 1500 as the called number translation.
	
Assign this 1500_PLAR_CSS to the button and you how have a button which will
 monitor the extension 1500 as well as call 1500 when pressed.
	
Cheers
Brad
	
	
________________________________
	
From: cisco-voip-bounces@puck.nether.net on behalf of Walenta, Phil
Sent: Tue 8/2/2005 6:46 AM
To: Ruben Montes; Ahmad Cheikh Moussa; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] Using Expansion Modules
	
	
What you're looking for is a busy lamp field/speed dial button.  This is a f
eature we've wanted for almost the entire history of CallManager 3.x +.  I w
ish I could say it was possible, but it's not...yet.
	
________________________________
	
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck
.nether.net] On Behalf Of Ruben Montes
Sent: Tuesday, August 02, 2005 7:41 AM
To: Ahmad Cheikh Moussa; cisco-voip@puck.nether.net
Subject: [cisco-voip] Using Expansion Modules
	
	
One quick question,
	
is it possible to monitor the state of a line with a button in the ip phone 
and use this same button to call this person???
If it is possible, how could I configure it?
	
Thanks,
	
Ruben
	
-----Mensaje original-----
De: cisco-voip-bounces@puck.nether.net en nombre de Ahmad Cheikh Moussa
Enviado el: mar 02/08/2005 11:11
Para: cisco-voip@puck.nether.net
CC:
Asunto: Re: [cisco-voip] partition and Calling Search Space on 3.3(4)
 
 
	
Hi!
 
Ahmad Cheikh Moussa wrote:
> Hi!
>
> I need help with configuring partitions in callmanager 3.3(4)
> A customer has some traines. These guys should be able to
> make internal calls, but outbound calls should be prohibited.
> I want to configure this with partitions, but my knwoledge with
> partition is less. Can anyone help me ?
> Can someone give me an link, where I can see an example ?
 
I made a test with two phones and I still have a problems.
Here are the steps I've done:
- configure partition A
- configure calling search space B
- add partition A to calling search Space B
- add PHONE A and PHONE B to partition A
- activate calling search space B on PHONE A
(activated on deviceconfiguration and on
the line configuration)
 
Normally PHONE A should now be only able to make
a call to PHONE B and anything else not, but
unfortunately it does. PHONE A can make normal calls
like all the other Phones.
 
Did I forgot something ?
Is this a wrong way ?
 
Regards,
Ahmad
 
 
--
Ahmad Cheikh-Moussa
NetUSE AG
Dr.-Hell-Straße, 24107 Kiel, Germany
Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
Service: Service@NetUSE.DE --  http://NetUSE.DE/
 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
 
	
	

[ Post a follow-up to this message ]