I have setup Firefly to use Sipgate, but have a few questions I'm hoping
someone here knows the answers to.

Firstly, I get no dial or ringing tone when making a call to a landline,
and suddenly hear the other person's voice when/if they answer. I suspect
there might also be a slight delay between them speaking and me hearing
their voice as a couple of people have said hello more than once.

Secondly, when I hang up, this doesn't seem to end the call. A test to my
landline number continues to ring after I've clicked hang-up in firefly, if
I pick up the handset I just get a dead line tone.

Thirdly, I have compiled and am using the g729 codec (which is why I am
using firefly) as my ntl cable only has 64kbps upload and using x-lite with
gsm the called party can hardly hear me. However the people I'm calling
sometimes say I sound a bit echoey, and I sometimes seem to get a few small
gaps in received speech. Does anyone know the best combination of
codecs/settings to aleviate these?

Many thanks in advance.

--

BB

[ Post a follow-up to this message ]

"Bonnie Bumble" <bonnie@bumble.be> wrote in message
news:1ml5set2007zf$.9sg12vjaxcxy$.dlg@40tude.net...
> I have setup Firefly to use Sipgate, but have a few questions I'm hoping
> someone here knows the answers to.
>
> Firstly, I get no dial or ringing tone when making a call to a landline,
> and suddenly hear the other person's voice when/if they answer. I suspect
> there might also be a slight delay between them speaking and me hearing
> their voice as a couple of people have said hello more than once.
>
> Secondly, when I hang up, this doesn't seem to end the call. A test to my
> landline number continues to ring after I've clicked hang-up in firefly,
if
> I pick up the handset I just get a dead line tone.
>
> Thirdly, I have compiled and am using the g729 codec (which is why I am
> using firefly) as my ntl cable only has 64kbps upload and using x-lite
with
> gsm the called party can hardly hear me. However the people I'm calling
> sometimes say I sound a bit echoey, and I sometimes seem to get a few
small
> gaps in received speech. Does anyone know the best combination of
> codecs/settings to aleviate these?
>
Hi, Ill try to cover the easy ones first, What are you using to speak as if
you are a bit echoey iys often to do with volume. try dropping the mic and
speaker volume. As to the breaks in speech, That still may happen, remember
you are while talking using arround 50% of your avalible bandwidth, so you
will have to expect a couple of dropped packets.

I am at the moment using firefly as an IAX softphone but have also used it
as sip and in both protocols ive not had the problems you mention. This
sounds like a signaling problem. Are you running the latest load ? AFAIK its
1.9.9 build 4521

Also did you have the problems before compliling the G729 codec ?

Short of running ethereal to check the messaging which is what i would do
now, there is little to do but a clean install test it, then complile g729
and test it. and see what happens

Good luck

[ Post a follow-up to this message ]

On Sat, 6 Aug 2005 22:46:10 +0100, Ian wrote:

> What are you using to speak as if you are a bit echoey iys often to do wit
h volume. try dropping the mic and
> speaker volume. As to the breaks in speech, That still may happen, remembe
r
> you are while talking using arround 50% of your avalible bandwidth, so you
> will have to expect a couple of dropped packets.

Hi Ian, thanks for your prompt reply. I'm using a headset with mic, and
have played around with the volume already. It's a pity Firefly doesn't
have better control over this like the auto levelling in x-lite. The gaps I
can probably live with as it doesn't seem to affect understanding too much.

> Are you running the latest load ? AFAIK its 1.9.9 build 4521

I guess so as I only d/l it last week from the virbiage site, the one for
third party networks.

> Also did you have the problems before compliling the G729 codec ?

I don't know as I couldn't get it to connect to sipgate at that point, but
as I said the whole point of trying firefly was the g729 codec otherwise
I'd have been happy with x-lite.

> Short of running ethereal to check the messaging

Bit over my head that

> then complile g729

The instructions given with the header file are a little out of date. The
codec files seem to have been updated to version a, but the freshtel
project files still reference the original version. Consequentely some
editing is required to get it to compile.

--

BB

[ Post a follow-up to this message ]