Hi

I've emailed and had no response, and I am on the latest version

Two problems that make it unusable!  Please note - this worked
perfectly for 2-3 days - then stopped.  Making me think its a scam...

Problem 1
=========
Laptop is standard Compaq Evo.  Worked fine.  Now, *sometimes*
Mic/speakers do not work - and hence need to hang up.  Reboot.  Try
again etc.  Setting to "hands free" makes no difference

Problem 2
=========
Ignoring above, now I dial, say my home, phone rings 2-3 times then
VoipBuster says "connected" and hangs up.  Or, if I actually answer the
phone - it disconnects in 2-3 seconds.

Clearly making this useless.

I've tried most things I can think of - clear up and reinstall; updated
soundcard drivers etc - but nothing   I've awaited a new version -
but one month on - nothing.

Any help or hints apprecaited - otherwise I've wasted my money in the
account! (hence thinking it is a scam)

[ Post a follow-up to this message ]

> Problem 2
> =========
> Ignoring above, now I dial, say my home, phone rings 2-3 times then
> VoipBuster says "connected" and hangs up.  Or, if I actually answer the
> phone - it disconnects in 2-3 seconds.

Had a similar issue, it was due to either having Skype running as well, or
it was down to Zonealarm - can't remember now!

Hellraiser...........>

[ Post a follow-up to this message ]

In message of Thu, 25 Aug 2005,  writes

>Any help or hints apprecaited - otherwise I've wasted my money in the
>account! (hence thinking it is a scam)
>

Sorry I can't help you with your particular problem.  But I will say
that it's NOT a scam.

It works perfectly with an ATA and phone. Make all my daytime outgoing
calls with them, with perfect quality.

DF

[ Post a follow-up to this message ]

On Thu, 25 Aug 2005 20:01:30 +0100, David Floyd <david@floyd.org.uk>
wrote:

>In message of Thu, 25 Aug 2005,  writes
> 
>
>Sorry I can't help you with your particular problem.  But I will say
>that it's NOT a scam.
>
>It works perfectly with an ATA and phone. Make all my daytime outgoing
>calls with them, with perfect quality.
>
>DF
I see postings on some voip forums that say you can't get voipbuster
to work on an ATA. If you have it all working then I am sure that
people would be interested in your settings.
What ATA are you using btw.


Remove 'no_spam_' from email address.

[ Post a follow-up to this message ]

In message of Thu, 25 Aug 2005, Brian A writes
>On Thu, 25 Aug 2005 20:01:30 +0100, David Floyd <david@floyd.org.uk>
>wrote:
> 
>I see postings on some voip forums that say you can't get voipbuster
>to work on an ATA. If you have it all working then I am sure that
>people would be interested in your settings.
>What ATA are you using btw.
>

People have got VoIPBuster to work on ATAs but not VoIPCheap.

I use a Sipura3000, and since you can't receive incoming calls on
VoIPBuster there's little point using up one of the registered lines. I
therefore use it for outgoing calls on a gateway with settings:

Gateway 4: <UserID>@sip.voipbuster.com
GW4 NAT Mapping Enable: yes
GW4 Auth ID: <UserID>
GW4 Password: <password>

David

[ Post a follow-up to this message ]

>
> I see postings on some voip forums that say you can't get voipbuster
> to work on an ATA. If you have it all working then I am sure that
> people would be interested in your settings.
> What ATA are you using btw.
>

I'm using voipbuster on an Asterisk PBX, works fine.  I am connecting
via IAX not SIP.  I read that they disabled SIP some time ago.

[ Post a follow-up to this message ]

David Floyd wrote:

> Sorry I can't help you with your particular problem.  But I will say
> that it's NOT a scam.
>
> It works perfectly with an ATA and phone. Make all my daytime outgoing
> calls with them, with perfect quality.
>
> DF

Yes, i made a 3 way call today, was very loud and clear! 

[ Post a follow-up to this message ]

davew wrote:
> 
>
> I'm using voipbuster on an Asterisk PBX, works fine.  I am connecting
> via IAX not SIP.  I read that they disabled SIP some time ago.

I've been using SIP on my ATA for a few days 

[ Post a follow-up to this message ]

Thus spaketh David Floyd:
> In message of Thu, 25 Aug 2005, Brian A writes 
>
> People have got VoIPBuster to work on ATAs but not VoIPCheap.
>
> I use a Sipura3000, and since you can't receive incoming calls on
> VoIPBuster there's little point using up one of the registered lines.
> I therefore use it for outgoing calls on a gateway with settings:
>
> Gateway 4: <UserID>@sip.voipbuster.com
> GW4 NAT Mapping Enable: yes
> GW4 Auth ID: <UserID>
> GW4 Password: <password>
>
> David



They gave me an 0845 incoming number, which I am able to receive calls on.


--
For South East Brum: http://www.south-east-birmingham.tk
For Free £10 credit when you get referred to TalkTalk or £5 when referred to
easyMobile contact me via above site.

[ Post a follow-up to this message ]

On Fri, 26 Aug 2005 06:21:55 +0100, {{{{{Welcome}}}
}} wrote:

>They gave me an 0845 incoming number, which I am able to receive calls on.

How did you get the 0845 number? I thought Voipbuster was only for
outgoing calls.

[ Post a follow-up to this message ]