2801 as h323 to CCM

Greetings:
Am trying to config a 2801 as an H323 Gateway to cisco Call Manager. Anyone 
done this?
Thanks.

Hi Greg,

I haven't specifically configured a 2801 as an H.323 GW with CCM but
don't anticipate any issues as CCM does not care about the specific
platform when using H.323.  Are you having a specific issue?

Kevin
On Sep 16, 2005, at 1:43 PM, Greg McAllister wrote:

> Greetings:
> Am trying to config a 2801 as an H323 Gateway to cisco Call Manager.
> Anyone done this?
> Thanks. ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

Hi Kevin,

Well, it's currently config'd (and operating, of course) in CCM as an MGCP
gateway and they want it H323 so they can get CID. I'm probably making it
harder than necessary, but was hoping to still use the CCM dial-plan and
just define the FXO ports in the 2801 as h323 as necessary. The 2801 won't
register with the CCM - it's defined in CCM with the IP addr as the name . .

Thanks.

_____

From: Kevin Thorngren [mailto:kthorngr@cisco.com]
Sent: Friday, September 16, 2005 2:25 PM
To: Greg McAllister
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] 2801 as h323 to CCM

Hi Greg,

I haven't specifically configured a 2801 as an H.323 GW with CCM but don't
anticipate any issues as CCM does not care about the specific platform when
using H.323. Are you having a specific issue?

Kevin
On Sep 16, 2005, at 1:43 PM, Greg McAllister wrote:

Greetings:
Am trying to config a 2801 as an H323 Gateway to cisco Call Manager. Anyone
done this?
Thanks. ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Hi Greg,

An H.323 GW won't register with CCM.  If the IP Address is list as in 
the example below then the GW and CCM have been communicating.   But 
the registration status will be unknown.

Product : H.323 Gateway
Gateway : 10.1.1.1
Device Protocol: H.225
Registration: Unknown
IP Address: 10.1.1.1       <<<<<

You will need to modify the current Route Patterns to point to the new 
H.323 GW or Route List and configure the appropriate dial peers on the 
GW.

Kevin

On Sep 16, 2005, at 3:37 PM, Greg McAllister wrote:

> Hi Kevin,
> Well, it�s currently config�d (and operating, of course) in CCM as an 
> MGCP gateway and they want it H323 so they can get CID. I�m probably 
> making it harder than necessary, but was hoping to still use the CCM 
> dial-plan and just define the FXO ports in the 2801 as h323 as 
> necessary. The 2801 won�t register with the CCM � it�s defined in CCM 
> with the IP addr as the name . .
> Thanks.
> _
>
> From: Kevin Thorngren [mailto:kthorngr@cisco.com]
> Sent: Friday, September 16, 2005 2:25 PM
> To: Greg McAllister
> Cc: cisco-voip@puck.nether.net
> Subject: Re: [cisco-voip] 2801 as h323 to CCM
> _
>
> Hi Greg,
>
>  I haven't specifically configured a 2801 as an H.323 GW with CCM but 
> don't anticipate any issues as CCM does not care about the specific 
> platform when using H.323. Are you having a specific issue?
>
>  Kevin
>  On Sep 16, 2005, at 1:43 PM, Greg McAllister wrote:
> Greetings:
>  Am trying to config a 2801 as an H323 Gateway to cisco Call Manager. 
> Anyone done this?
>  Thanks. ________________________________________
_______
>  cisco-voip mailing list
>  cisco-voip@puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip

Interesting - Your example is exactly what's currently displayed. The 2801
H323 status shows not-registered also.

The current designation for it in CCM as the MGCP GW is the URL -- CCM would
not allow using the same name for the H323 GW. Does what you say then mean
that I can use it in the current state and build a CCM Route to the GW IP
addr and make calls through the H323 ports with a dialpeer match?

Thanks. Have a good weekend.

Greg.

_____

From: Kevin Thorngren [mailto:kthorngr@cisco.com]
Sent: Friday, September 16, 2005 3:12 PM
To: gregmcallister@mchsi.com
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] 2801 as h323 to CCM

Hi Greg,

An H.323 GW won't register with CCM. If the IP Address is list as in the
example below then the GW and CCM have been communicating. But the
registration status will be unknown.

Product : H.323 Gateway
Gateway : 10.1.1.1
Device Protocol: H.225
Registration: Unknown
IP Address: 10.1.1.1 <<<<<

You will need to modify the current Route Patterns to point to the new H.323
GW or Route List and configure the appropriate dial peers on the GW.

Kevin

On Sep 16, 2005, at 3:37 PM, Greg McAllister wrote:

Hi Kevin,
Well, it's currently config'd (and operating, of course) in CCM as an MGCP
gateway and they want it H323 so they can get CID. I'm probably making it
harder than necessary, but was hoping to still use the CCM dial-plan and
just define the FXO ports in the 2801 as h323 as necessary. The 2801 won't
register with the CCM - it's defined in CCM with the IP addr as the name . .
Thanks.

From: Kevin Thorngren [mailto:kthorngr@cisco.com]
Sent: Friday, September 16, 2005 2:25 PM
To: Greg McAllister
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] 2801 as h323 to CCM

Hi Greg,

I haven't specifically configured a 2801 as an H.323 GW with CCM but don't
anticipate any issues as CCM does not care about the specific platform when
using H.323. Are you having a specific issue?

Kevin
On Sep 16, 2005, at 1:43 PM, Greg McAllister wrote:
Greetings:
Am trying to config a 2801 as an H323 Gateway to cisco Call Manager. Anyone
done this?
Thanks. ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip