 |
|
 |
|
09-23-05 10:45 PM
I'm trying to configure an E1 pri in Spain, and I'm never getting past a
state of "TEI_ASSIGNED". Switch type I'm using is Net5, as DPNSS
doesn't seem to get any activity going on the D channel.
I'm using an E1 MFT (multiflex trunk), with framing of non-crc4.
Here's a sample of the ISDN q.921 L2 output, and to me it looks like
we're not getting a proper response from the switch, but I can't be
sure:
Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 EVENT: Pri_Activate_L2: sending
NL_EST_REQ
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: L3_Go: source = 0x400,
event = 0x300, call id = 0xFFFF, int id = 0x0
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: L3_Go: event 0x300 cr_len
0 cr 0
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: L3_Go: call_id 0xFFFF cr
0x0 state 26 event 0x300 ces 1
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: L3_ProcessEvent: callref =
0x0000 NL_EST_REQ:U98_NLEstReq(nlcb)
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: U98_NLEstReq: send
DL_EST_REQ to L2
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: L3_MailPkt: Request 0x0200
to callref/callid 0xFFFF/0000 on CES 1
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: srl_send_l3_pak:
source_id = Q.931 0x0300, dest_id = Q.921 0x0000, prim =
DL_EST_REQ 0x0200
priv_len = 4 int_id = 0x4613B21C datasize = 16
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: data =
*Sep 23 16:31:26 CEST: 4613B21C00000300020004A400010800
*Sep 23 16:31:26 CEST:
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: L3_state_change: callref
0x0000 old DL_IDLE_STATE, new ESTABLISH_WAIT
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: handle_mail: received:
dest_id = 0, source_id = 768, prim = 200
priv_ln = 4, int_id = 1175695900, datasize = 16
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: L2IF_DispPak: packet -
start(3F401B18), size (16)
*Sep 23 16:31:26 CEST: 450000283FC940007F0683A4AC147034
*Sep 23 16:31:26 CEST:
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q921d: handle_mail: setting pkt
to NULL
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q921: L2_EstablishDataLink:
sending SABME
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: L2IF_SendprimPkt:
source_id (0x20A), state (0x4), dest_id (0x200), event (0x140),
sapi (0x0), ces (0x1), call_id (0x0),
chan_id (0x0), int_id (0x4613B21C), free_p (0x1), pkt
(0x4522D7A8), msecs (0x0), priority (0xA)
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: L2IF_SendPkt:
source_id (0x20A), state (0x4),
dest_id (0x200), event (0x140),
sapi (0x0), ces (0x1), call_id (0x0),
chan_id (0x0), int_id (0x4613B21C), free_pkt (0x1),
pkt (0x44F05D14), msecs (0x0), priority (0xA)
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: L2IF_DispPak: packet -
start(3F401D98), size (3)
*Sep 23 16:31:26 CEST: 00017F
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: L2IF_SendPkt: Sending
from L2
dest_id = 0, source_id = 522, prim = 140
priv_ln = 4, int_id = 1175695900
datastart = 3F401D88, netstart = 3F401D98, datasize = 19
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: L2IF_DispPak: packet -
start(3F401D88), size (19)
*Sep 23 16:31:26 CEST: 4613B21C0000020A0140040200011A00
*Sep 23 16:31:26 CEST: 00017F
*Sep 23 16:31:26 CEST: ISDN Q921d: isdn_l2d_srq_process: QUEUE_EVENT
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: handle_l2d_srq_mail:
received:
dest_id = 0, source_id = 522, prim = 140
priv_ln = 4, int_id = 1175695900, datasize = 3
line_status[0] = IF_ACTIVE
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q921f: User TX ->
*Sep 23 16:31:26 CEST: 00017F
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q921: User TX -> SABMEp sapi=0
tei=0
CMESpain#
*Sep 23 16:31:26 CEST: ISDN Q921d: isdn_l2d_srq_process: event_count 1
*Sep 23 16:31:27 CEST: ISDN Q921d: l2_timer: timer (0x461F6E94),
timer_type (0x1240)
*Sep 23 16:31:27 CEST: ISDN Se0/2/0:15 PACKET: L2IF_SendprimPkt:
source_id (0x20A), state (0x5), dest_id (0x200), event (0x140),
sapi (0x0), ces (0x1), call_id (0x0),
chan_id (0x0), int_id (0x4613B21C), free_p (0x1), pkt
(0x469ABC10), msecs (0x0), priority (0xA)
*Sep 23 16:31:27 CEST: ISDN Se0/2/0:15 PACKET: L2IF_SendPkt:
source_id (0x20A), state (0x5),
dest_id (0x200), event (0x140),
sapi (0x0), ces (0x1), call_id (0x0),
chan_id (0x0), int_id (0x4613B21C), free_pkt (0x1),
pkt (0x45706784), msecs (0x0), priority (0xA)
*Sep 23 16:31:27 CEST: ISDN Se0/2/0:15 PACKET: L2IF_DispPak: packet -
start(3F7E6EB8), size (3)
*Sep 23 16:31:27 CEST: 00017F
*Sep 23 16:31:27 CEST: ISDN Se0/2/0:15 PACKET: L2IF_SendPkt: Sending
from L2
dest_id = 0, source_id = 522, prim = 140
priv_ln = 4, int_id = 1175695900
datastart = 3F7E6EA8, netstart = 3F7E6EB8, datasize = 19
[ Post a follow-up to this message ]
|
|
|
 |
|
 |
|
 |
|
09-24-05 12:45 PM
Phil,
As far as I know, Telefonica is actually using CRC4 - try with that
instead.
I sent them a document to verify my settings for a deployment a couple
of weeks ago, and all that they complained about was that they required
CRC4.
Best regards,
/M
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Walenta, Phil
Sent: Friday, September 23, 2005 5:09 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] E1 PRI in Spain
I'm trying to configure an E1 pri in Spain, and I'm never getting past a
state of "TEI_ASSIGNED". Switch type I'm using is Net5, as DPNSS
doesn't seem to get any activity going on the D channel.
I'm using an E1 MFT (multiflex trunk), with framing of non-crc4.
Here's a sample of the ISDN q.921 L2 output, and to me it looks like
we're not getting a proper response from the switch, but I can't be
sure:
Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 EVENT: Pri_Activate_L2: sending
NL_EST_REQ
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: L3_Go: source = 0x400,
event = 0x300, call id = 0xFFFF, int id = 0x0
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: L3_Go: event 0x300 cr_len
0 cr 0
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: L3_Go: call_id 0xFFFF cr
0x0 state 26 event 0x300 ces 1
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: L3_ProcessEvent: callref =
0x0000 NL_EST_REQ:U98_NLEstReq(nlcb)
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: U98_NLEstReq: send
DL_EST_REQ to L2
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: L3_MailPkt: Request 0x0200
to callref/callid 0xFFFF/0000 on CES 1
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: srl_send_l3_pak:
source_id = Q.931 0x0300, dest_id = Q.921 0x0000, prim =
DL_EST_REQ 0x0200
priv_len = 4 int_id = 0x4613B21C datasize = 16
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: data =
*Sep 23 16:31:26 CEST: 4613B21C00000300020004A400010800
*Sep 23 16:31:26 CEST:
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q931d: L3_state_change: callref
0x0000 old DL_IDLE_STATE, new ESTABLISH_WAIT
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: handle_mail: received:
dest_id = 0, source_id = 768, prim = 200
priv_ln = 4, int_id = 1175695900, datasize = 16
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: L2IF_DispPak: packet -
start(3F401B18), size (16)
*Sep 23 16:31:26 CEST: 450000283FC940007F0683A4AC147034
*Sep 23 16:31:26 CEST:
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q921d: handle_mail: setting pkt
to NULL
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q921: L2_EstablishDataLink:
sending SABME
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: L2IF_SendprimPkt:
source_id (0x20A), state (0x4), dest_id (0x200), event (0x140),
sapi (0x0), ces (0x1), call_id (0x0),
chan_id (0x0), int_id (0x4613B21C), free_p (0x1), pkt
(0x4522D7A8), msecs (0x0), priority (0xA)
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: L2IF_SendPkt:
source_id (0x20A), state (0x4),
dest_id (0x200), event (0x140),
sapi (0x0), ces (0x1), call_id (0x0),
chan_id (0x0), int_id (0x4613B21C), free_pkt (0x1),
pkt (0x44F05D14), msecs (0x0), priority (0xA)
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: L2IF_DispPak: packet -
start(3F401D98), size (3)
*Sep 23 16:31:26 CEST: 00017F
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: L2IF_SendPkt: Sending
from L2
dest_id = 0, source_id = 522, prim = 140
priv_ln = 4, int_id = 1175695900
datastart = 3F401D88, netstart = 3F401D98, datasize = 19
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: L2IF_DispPak: packet -
start(3F401D88), size (19)
*Sep 23 16:31:26 CEST: 4613B21C0000020A0140040200011A00
*Sep 23 16:31:26 CEST: 00017F
*Sep 23 16:31:26 CEST: ISDN Q921d: isdn_l2d_srq_process: QUEUE_EVENT
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 PACKET: handle_l2d_srq_mail:
received:
dest_id = 0, source_id = 522, prim = 140
priv_ln = 4, int_id = 1175695900, datasize = 3
line_status[0] = IF_ACTIVE
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q921f: User TX ->
*Sep 23 16:31:26 CEST: 00017F
*Sep 23 16:31:26 CEST: ISDN Se0/2/0:15 Q921: User TX -> SABMEp sapi=0
tei=0
CMESpain#
*Sep 23 16:31:26 CEST: ISDN Q921d: isdn_l2d_srq_process: event_count 1
*Sep 23 16:31:27 CEST: ISDN Q921d: l2_timer: timer (0x461F6E94),
timer_type (0x1240)
*Sep 23 16:31:27 CEST: ISDN Se0/2/0:15 PACKET: L2IF_SendprimPkt:
source_id (0x20A), state (0x5), dest_id (0x200), event (0x140),
sapi (0x0), ces (0x1), call_id (0x0),
chan_id (0x0), int_id (0x4613B21C), free_p (0x1), pkt
(0x469ABC10), msecs (0x0), priority (0xA)
*Sep 23 16:31:27 CEST: ISDN Se0/2/0:15 PACKET: L2IF_SendPkt:
source_id (0x20A), state (0x5),
dest_id (0x200), event (0x140),
sapi (0x0), ces (0x1), call_id (0x0),
chan_id (0x0), int_id (0x4613B21C), free_pkt (0x1),
pkt (0x45706784), msecs (0x0), priority (0xA)
*Sep 23 16:31:27 CEST: ISDN Se0/2/0:15 PACKET: L2IF_DispPak: packet -
start(3F7E6EB8), size (3)
*Sep 23 16:31:27 CEST: 00017F
*Sep 23 16:31:27 CEST: ISDN Se0/2/0:15 PACKET: L2IF_SendPkt: Sending
from L2
dest_id = 0, source_id = 522, prim = 140
priv_ln = 4, int_id = 1175695900
datastart = 3F7E6EA8, netstart = 3F7E6EB8, datasize = 19
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Sponsored Links |
 |
 |
|
|
 |
All times are GMT. The time now is 07:54 PM. |
 |
|
|
 |
|
 |
|
|
 |
|
Forum Rules:
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is OFF
vB code is ON
Smilies are ON
[IMG] code is OFF
|
|
|
|
Medical and Health forum | Computer Games Reviews | Graphics design forum
|
 |
|
 |
|
