Justin,

Thank you very much - disabling those setting worked!!!!!

Have a great weekend

Tom

-----Original Message-----
From: Justin Steinberg [mailto:jsteinberg@gmail.com]
Sent: Friday, September 23, 2005 12:22 PM
To: Thomas Theado
Cc: cisco-voip@puck.nether.net
Subject: Re: cisco-voip (no subject)


Thomas,

It sounds like you are running into a similiar issue that I experienced
a while back.  Are you running MGCP pstn gateways?  If so, you probably
are allowing REDIRECTING NUMBER IE DELIVERY inbound and outbound on the
gateway endpoint configuration page within ccmadmin.

Unless you are using a gateway for voicemail intergration, or you use
centralized voicemail, these settings should not be enabled.

Check and disable and try again.

Justin

> Message: 5
> Date: Fri, 23 Sep 2005 11:04:02 -0400
> From: "Thomas Theado" <TTheado@tla.com>
> Subject: [cisco-voip] (no subject)
> To: <cisco-voip@puck.nether.net>
> Message-ID: < 43B78DBAD3366F48B96610E046148408A5700B@h
qwexc.tla.com>
> Content-Type: text/plain; charset="us-ascii"
>
> I am running call manager 4.1 and due to Hurricane RITA we are
> accomplishing some call coverage for a help desk.  When the new number

> is dialed directly everything works great.  If a user dials the old
> number (it has been forwarded to the new number) it goes directly to
> the autoattendant.
>
> Any ideas?
>
> Thanks,
>
> Tom

[ Post a follow-up to this message ]