Have setup the ATA to use VOIPBuster, I can dial out successfully and
the receiver can hear me. However, I cannot hear them.

I have tried Port Forwarding on my router and enabled DMZ as suggested
by Linksys. - Still doesn't work!!

Any ideas anyone?


TIA!

ras
-- ras

[ Post a follow-up to this message ]

For an SPA-2002 folowing worked :

1. Line tab setting; change "Nat Mapping Enable" to yes
2. SIP tab; change "Substitute VIA Addr" to yes, and "EXT IP" to your
router's WAN IP.
3. Put the spa in the router's DMZ

Check it out :=)

[ Post a follow-up to this message ]

On Sat, 24 Sep 2005 11:48:45 +0100, ras <ron@nospam.co.uk> wrote:

>Have setup the ATA to use VOIPBuster, I can dial out successfully and
>the receiver can hear me. However, I cannot hear them.
>
>I have tried Port Forwarding on my router and enabled DMZ as suggested
>by Linksys. - Still doesn't work!!


use stun.voipbuster.com not sip.voipbuster.com

Me

[ Post a follow-up to this message ]

On 24 Sep 2005 05:31:59 -0700, "peter" <cphpeter@gmail.com> wrote:

>For an SPA-2002 folowing worked :
>
>1. Line tab setting; change "Nat Mapping Enable" to yes
>2. SIP tab; change "Substitute VIA Addr" to yes, and "EXT IP" to your
>router's WAN IP.
>3. Put the spa in the router's DMZ
>
>Check it out :=)

Hi Peter

Your Suggestion Together with the following Instructions Worked for my
Linksys PAP2

On the sip page (advanced mode):

STUN Server: stun.fwdnet.net:3478
(you can use any STUN server, they are not provider specific.)

On the Line 1 (or 2) page:

Proxy: sip.voipbuster.com
Use Outbound Proxy: no
Outbound Proxy: (leave empty)
Register: yes

Display Name: (your voipbuster username)
User ID: (your voipbuster username)
Password: (your voipbuster password)
-- ras

[ Post a follow-up to this message ]

Great - thanks for the feedback

[ Post a follow-up to this message ]