It seems as if i have to contact MS PSS in order to download the updates.
Luckily i was able to find this information by rustling through various
blogs.  The Biztalk Installation Guide needs to be updated to reflect this
requirement.  This is very frustrating.......



"lh" <lhughey@gmail.com> wrote in message
news:%23KGOunu4FHA.1148@tk2msftngp13.phx.gbl...
> Im trying to install Biztalk 2004 and I'm having some problems installing
> the COM+ components at the end of the install (error code 1928).  So i
> decided to double check the biztalk setup docs (dated 2/15/2005).  The
> docs state that I need the following updates as prerequisites:
> Updates Q828758, Q329433, and Q831950
>
> The lack of these updates may be the source of my problems.  But I cannot
> download these updates because they are not listed on Microsofts site.
> The only reference of these updates is in the biztalk setup doc.   Its
> seems as if there are two possible fixes to my problem.  Either there
> should be an document on the MS download site that states that updates
> Q828758, Q329433, and Q831950 have been rolled up or the biztalk 2004
> installation guide should be updated.   Currently, there is NO way for
> ANYONE to meet the initial requirements of a biztalk installation on XP
> (updated with SP2).
>
>
>
>
>
>

[ Post a follow-up to this message ]

...and I'll bet this didn't work for you, since q828758 com rollup 6 is
for pre-xp/sp2 installations and I'll bet you're trying to install the
development components on Windows XP SP2. See my next post about error
1928 for resolution and the cause.

[ Post a follow-up to this message ]

Oisin,

Thank you very much for your reply.  I'm lickin' my chops at the prospect of
a fix for this issue.  I dont see your other post.  I'm reading posts
through outlook express.   I'm guessing you made your posts at a website.
Could you please post your resolution here?  I have also done a google for
the terms "Oisin" and "1928" and wasnt able to come up with any results.

thank you,
Lyndon Hughey


"Oisin" <oising@gmail.com> wrote in message
news:1131339130.072207.38920@f14g2000cwb.googlegroups.com...
> ...and I'll bet this didn't work for you, since q828758 com rollup 6 is
> for pre-xp/sp2 installations and I'll bet you're trying to install the
> development components on Windows XP SP2. See my next post about error
> 1928 for resolution and the cause.
>

[ Post a follow-up to this message ]

I've documented a work around and explanation for this error on my
blog;

see http://www.nivot.ca/

- Oisin Grehan

[ Post a follow-up to this message ]