how would i get caller ID for my carrier with a t1 cas.  below is the contro
ller conifg 


controller T1 0/1/0
framing esf
linecode b8zs
ds0-group 1 timeslots 1-24 type e&m-wink-


i was told by cisco that this is imposible,  but this was working at one tim
e

Attachment:
This has been downloaded 0 time(s).

[ Post a follow-up to this message ]

Found an old doc talking about getting caller id on T1 CAS for AS5x00
routers.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/
products_feature_guide09186a008007fe27.html

I'm pretty sure the same thing is possible with other IOS gateways.
Check out http://www.cisco.com/en/US/tech/tk652/tk653/
technologies_tech_note09186a00800e2560.shtml#ems.

Basically you need E&M fbB to get incoming DNIS.

-Ryan

On Nov 23, 2005, at 12:23 AM, ajames grace wrote:

how would i get caller ID for my carrier with a t1 cas.  below is the
controller conifg


controller T1 0/1/0
framing esf
linecode b8zs
ds0-group 1 timeslots 1-24 type e&m-wink-


i was told by cisco that this is imposible,  but this was working at
one time
 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]