Hello,

Have you tried increasing the setBandwidthLimit() on the server side?
Sometimes it's default bw limits. Try:

client.setBandwidthLimit(500000/8,500000/8)

and see if that helps. (I'm assuming you have at least 1mb BW on your
FCS 1.5 2 r138--if not, try another setting that will max your
ceiling BW)

HTH,
Bill
On Dec 15, 2005, at 5:25 AM, lti-1a8g-LMbKfuCQv7pBDgjK7y7TUQ@public.gmane.or
g wrote:

> Hi again,
>
> Context: FCS 1.5.r2
>
> Could a performance option in the FCS configuration file induce a
> constant audio delay over video ?
> I think I read about it : a case where FCS would postpone the
> transmission of audio data for the time to have "sufficient" data to
> send, and resulting in audio/video desynchronisation. (But I think I
> read it in the fixed issue of the 1.5.r2 release ...)
>
> I'm experiencing a weird behavior on a live flash a/v streaming
> between
> three points : an encoder, the flashcom server, and my computer.
> The connectivy between the three entities are excellent, and the
> server
> hosting FCS is way off the needs for my current : bi-piv 3 Ghz, 2
> GB DDR
> ram, and one 450 kbps live stream. (one publisher, one subscriber).
> Still, I'm experiencing a somehow "constant" audio delay over the
> video,
> not very noticeable (it's half a second at most), but present.
>
> The only modifications I did between a "fresh from the box" install
> was
> activating the AppLogs (but memory and cpu usage are low) and *not*
> activating the EnhancedSeek (because I felt it had no impact on a live
> streaming)...
>
> Regards,
> lti-1a8g
>
>
>
>
>
> =-----------------------------------------------------------
> Supported by Fig Leaf Software - http://www.figleaf.com
> =-----------------------------------------------------------
>
> To change your subscription options or search the archive:
> http://chattyfig.figleaf.com/mailman/listinfo/flashcomm

bill sanders | www.sandlight.com | bloomfield, ct | 860-242-2260



=-----------------------------------------------------------
Supported by Fig Leaf Software - http://www.figleaf.com
=-----------------------------------------------------------

To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm

[ Post a follow-up to this message ]