I have a cluster Call Manager 4.1.3 and a cisco 3700 IOS Gateway to a PBX.
I can conference IP Phones on the Call Manager all day long.  However, when
I try to conference in a phone on the PBX, the IP Phone says "No Conference
Bridge".
Why is this happening?
Also, would there be any issues the pther way with a PBX phone trying to
conference multiple
IP Phones on the Call Manager?

Thanks,
Bob

[ Post a follow-up to this message ]

Sounds like the Device Pool the GW is in does not have an MRGL assigned
to allocate conference resources for that side of the call.

The PBX will control the conference resources when a PBX phone tries to
conference the IP Phones.  From a CallManager and GW perspective there
is nothing that needs to be configured or available for the PBX phone
to conference IP Phones.  Not sure what you would need to do on the PBX
to provide conference resources to it's GW to CallManager.

Kevin
On Jan 9, 2006, at 1:28 AM, Bob A. Bowie wrote:

> I have a cluster Call Manager 4.1.3 and a cisco 3700 IOS Gateway to a
> PBX.
> I can conference IP Phones on the Call Manager all day long.  However,
> when
> I try to conference in a phone on the PBX, the IP Phone says "No
> Conference
> Bridge".
> Why is this happening?
> Also, would there be any issues the pther way with a PBX phone trying
> to
> conference multiple
> IP Phones on the Call Manager?
>
> Thanks,
> Bob
>
>
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>

[ Post a follow-up to this message ]