Should I keep the failover on the remote site.  We have two sites.   What is
sue will I runb intoi. If I put the unity box on the voice network. Instead 
of the data with the exchange server. I'm asking about both unity server
James D. Grace
System Engineer
CCNP CCNA MCSE MCDBA
Digitel Corp.

[ Post a follow-up to this message ]

I didn't quite understand the second part of your post, but in regards
to the keeping the Unity failover server on the remote site, I don't see
a problem with that.  Before I put my failover Unity server at our DR
site, I read an article on cisco about the requirements about putting
the Unity failover server on the other side of the WAN.  It required
that there be at least 45MB between the Unity servers.  We have a DS3 so
we just met that requirement.  I did a search on Cisco.com, but could
not find that article.  Hope this helps.

-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of James
Sent: Thursday, January 12, 2006 11:17 AM
To: CiscosupportUpuck
Subject: [cisco-voip] Unit failover

Should I keep the failover on the remote site.  We have two sites.
What issue will I runb intoi. If I put the unity box on the voice
network. Instead of the data with the exchange server. I'm asking about
both unity server
James D. Grace
System Engineer
CCNP CCNA MCSE MCDBA
Digitel Corp.
 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
--------------------------------------------------------

IRS Circular 230  Disclosure:  To ensure compliance with requirements impose
d by the IRS, we inform you that any U.S. federal tax advice in this communi
cation (including attachments) is not intended or written by Fenwick & West 
LLP to be used, and cannot
be used, for the purpose of (i) avoiding penalties under the Internal Revenu
e Code or (ii) promoting, marketing, or recommending to another party any tr
ansaction or matter addressed herein.
--------------------------------------------------------

ATTENTION:
The information contained in this message may be legally privileged and conf
idential.  It is intended to be read only by the individual or entity to who
m it is addressed or by their designee. If the reader of this message is not
 the intended recipient, yo
u are on notice that any distribution of this message, in any form, is stric
tly prohibited.

If you have received this message in error, please immediately notify the se
nder and/or Fenwick & West LLP by telephone at (650) 988-8500 and delete or 
destroy any copy of this message.

[ Post a follow-up to this message ]