I have problem to restrict some users from dialing IDD during WAN
outage. My dial-patterns are:
9.001!, Partition = idd, RouteList = HQ-GW, predot
5XXX, Partition = internal, CSS = ld, RouteList = toll (routed to GK
and then local gateway for backup)
Phone A is in internal partition and CSS = hq-all (partitions:
internal, local, ld, idd)
Phone B is in internal partition and CSS = hq-local (partitions:
internal, local)
Translation rule: 1#.XXXX in hq-all partition, CSS = hq-all, Called
party discard digit = predot, Prefix digit = 90016221565

When my WAN link is up, I can dial 5XXX from any phone without
problem. When my WAN link is down, dialing 5XXX will be routed through
local gateway as IDD (international) call. When the WAN outage
happened, all my users with either hq-all or hq-local CSS were still
able to reach 5XXX. By right phone B should fail to call 5XXX during
WAN outage due to CSS restriction. Can I block Phone B from dialing
that number only when my WAN link is down? My gatekeeper in in HQ site
(local to CallManager servers). Plz help. thanks

[ Post a follow-up to this message ]

Please ignore my previous email as the config was wrong. Kindly read though 
this one. Thank you.

I have problem to restrict some users from dialing IDD during WAN outage. My
 dial-patterns are:
9.001!, Partition = idd, RouteList = HQ-GW, predot
5XXX, Partition = toll, CSS = ld, RouteList = toll (routed to):
1 - GK RG = prefix 1#
2 - Local GW RG = Prefix digit = 90016221565

Phone A is in internal partition and CSS = hq-all (partitions: internal, loc
al, toll, idd)
Phone B is in internal partition and CSS = hq-local (partitions: internal, l
ocal, toll)
Translation rule: 1#XXXX in hq-all partition, CSS = internal (partitions: in
ternal), Called party number mask - XXXX

When my WAN link is up, I can dial 5XXX from any phone without problem. When
 my WAN link is down, dialing 5XXX will be
routed through
local gateway as IDD (international) call. When the WAN outage happened, all
 my users with either hq-all or hq-local CSS
were still able to reach 5XXX. By right phone B should fail to call 5XXX dur
ing WAN outage due to CSS restriction. Can I
block Phone B from dialing that number only when my WAN link is down? My gat
ekeeper in in HQ site (local to CallManager
servers). Plz help. thanks

[ Post a follow-up to this message ]

I am not sure I understand your comment regarding the CSS restriction
for phone B but I will take a guess :-)

Are you expecting that since the call is being routed to the Local GW
RG in your Route List that CCM will then match the 9.001! Route
Pattern?

This is not the case.  CCM will simply extend the call to the GW with
the prefixed digits defined.  If you want to restrict phone B from
using this RG then you will need to create a second Route Pattern for
5XXX in a new partition for phone B to use, for example:

5XXX, Partition = nontoll, CSS = ld, RouteList = toll (routed to):
1 - GK RG = prefix 1#

Phone B is in internal partition and CSS = hq-local (partitions:
internal, local, nontoll)

HTH,
Kevin
On Jan 27, 2006, at 6:18 AM, Ciscozest wrote:

> Please ignore my previous email as the config was wrong. Kindly read
> though this one. Thank you.
>
> I have problem to restrict some users from dialing IDD during WAN
> outage. My dial-patterns are:
> 9.001!, Partition = idd, RouteList = HQ-GW, predot
> 5XXX, Partition = toll, CSS = ld, RouteList = toll (routed to):
> 1 - GK RG = prefix 1#
> 2 - Local GW RG = Prefix digit = 90016221565
>
> Phone A is in internal partition and CSS = hq-all (partitions:
> internal, local, toll, idd)
> Phone B is in internal partition and CSS = hq-local (partitions:
> internal, local, toll)
> Translation rule: 1#XXXX in hq-all partition, CSS = internal
> (partitions: internal), Called party number mask - XXXX
>
> When my WAN link is up, I can dial 5XXX from any phone without
> problem. When my WAN link is down, dialing 5XXX will be
> routed through
> local gateway as IDD (international) call. When the WAN outage
> happened, all my users with either hq-all or hq-local CSS
> were still able to reach 5XXX. By right phone B should fail to call
> 5XXX during WAN outage due to CSS restriction. Can I
> block Phone B from dialing that number only when my WAN link is down?
> My gatekeeper in in HQ site (local to CallManager
> servers). Plz help. thanks
>
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>

Attachment:
This has been downloaded 0 time(s).

[ Post a follow-up to this message ]